The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension > Suspension Marketplace

Web 67-72chevytrucks.com



Reply
 
Thread Tools Display Modes
Old 05-18-2011, 04:28 PM   #1
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
13" and 14" Corvette Brakes for C10's

Awhile back I posted some Corvette brake conversions we had done for customers and now we are going to offer them to forum members in different stages. The basic setup with include McGaughys 2.5 Drop spindles, bearings, seals, steel hubs drilled for 5x4.75" bolt circle with 7/16" studs, and the mounting bracket to make it all work. This is the most economical kit and lets you find a deal on your corvette parts whether new or used. At this stage, you will only need rotors, loaded calipers, hoses, and banjo bolts to complete the kit.
The next stage is fully assembled spindles ready to install, includes 13" drilled, slotted, and coated rotors, and loaded C5 RED Z06 calipers.
We also have the C6 Z06 14" brakes in red or Gransport Silver.
Prices as follows:
Basic starter kit $599.00
13" Assembled $999.00
14" C6 Z06 assembled $1499.00
I also have all components available separately. Redrilling hubs and rotors to 5x5 is available for $35ea. 6 lug hubs also available. I also have a huge inventory of used calipers.
Attached Images
  
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 05-18-2011, 05:06 PM   #2
fastbagged68
Registered User
 
fastbagged68's Avatar
 
Join Date: Jun 2002
Location: Tri Valley California
Posts: 792
Re: 13" and 14" Corvette Brakes for C10's

What is the weight difference between the mcgauphys complete kit vs. The corvette? I know the mcgauphys kit is pretty heavy. Thx.
Posted via Mobile Device
fastbagged68 is offline   Reply With Quote
Old 05-18-2011, 05:40 PM   #3
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by fastbagged68 View Post
What is the weight difference between the mcgauphys complete kit vs. The corvette? I know the mcgauphys kit is pretty heavy. Thx.
Posted via Mobile Device
Thats a fantastic question, though I've wondered before I never took the time until just now to check. A loaded C5 caliper with brake hose and hose bracket weights in at 10lbs 10oz while the Silverado caliper out of a Mcgaughys big brake kit weights 17lbs 4oz ea
Attached Images
  
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 05-18-2011, 05:44 PM   #4
slimneverdies
Registered User
 
slimneverdies's Avatar
 
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
Re: 13" and 14" Corvette Brakes for C10's

Posted via Mobile Device
slimneverdies is offline   Reply With Quote
Old 05-18-2011, 05:45 PM   #5
slimneverdies
Registered User
 
slimneverdies's Avatar
 
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
Re: 13" and 14" Corvette Brakes for C10's

Wow. That's 14 lbs just in brakes!!!
Posted via Mobile Device
slimneverdies is offline   Reply With Quote
Old 07-08-2011, 03:48 AM   #6
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: 13" and 14" Corvette Brakes for C10's

Looks good any plans on matching rear kits?
andrewmp6 is offline   Reply With Quote
Old 07-08-2011, 07:55 AM   #7
TxSqueeze
Registered User
 
Join Date: Dec 2008
Location: Crane, Tx
Posts: 147
Re: 13" and 14" Corvette Brakes for C10's

Those 14"er's are beautiful!!
__________________
68 SWB- Heads/Cam 6.0 w/4L80E swap in progress
TxSqueeze is offline   Reply With Quote
Old 11-11-2011, 02:27 AM   #8
Spla'nin
Registered User
 
Join Date: Nov 2011
Location: Cascadia, Wa
Posts: 28
Re: 13" and 14" Corvette Brakes for C10's

What is the minimum clearance inside wheel diameter required on the C5 assembly if you would be so kind...?
I'm trying to find out if I could use an existing set of wheels or not...thanx
__________________
'76 SB 350 400

Last edited by Spla'nin; 11-11-2011 at 02:34 AM. Reason: Lucy wants to know...
Spla'nin is offline   Reply With Quote
Old 11-11-2011, 03:21 AM   #9
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

.875 should be enough but I like 1" when I'm ordering custom machined wheels
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 11-11-2011, 06:17 PM   #10
Spla'nin
Registered User
 
Join Date: Nov 2011
Location: Cascadia, Wa
Posts: 28
Exclamation Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by way2lo2 View Post
.875 should be enough but I like 1" when I'm ordering custom machined wheels
Are you quoting (1)the backspacing clearance measurement from the wheel / hub interface or the "add to" distance in radius from the caliper to the inside of the rim...? (2)What is the distance required from spindle center to just past caliper mounted (radius)...? plus or minus 8"

Both would be helpful...thanx
__________________
'76 SB 350 400
Spla'nin is offline   Reply With Quote
Old 11-11-2011, 10:34 PM   #11
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by Spla'nin View Post
Are you quoting (1)the backspacing clearance measurement from the wheel / hub interface or the "add to" distance in radius from the caliper to the inside of the rim...? (2)What is the distance required from spindle center to just past caliper mounted (radius)...? plus or minus 8"

Both would be helpful...thanx
yes, thats wms to outside of caliper. The radial dimension your looking for is 7.74" this is center of hub to outside of caliper
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 12-08-2011, 06:57 AM   #12
Valhalla
Registered User
 
Valhalla's Avatar
 
Join Date: Nov 2010
Location: Chandler, Arizona
Posts: 295
Re: 13" and 14" Corvette Brakes for C10's

Good God those are sick.
__________________
My build thread for Project TiC TaC/Jazzmin Oh Yeahhh



Cheap work is never good and good work is never cheap. Lesson = learn to do it all the right way on your own.

SqueegeeMan

Last edited by N2TRUX; 12-09-2011 at 12:28 PM. Reason: Removed item for sale
Valhalla is offline   Reply With Quote
Old 12-14-2011, 12:24 AM   #13
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: 13" and 14" Corvette Brakes for C10's

Boris - nice talking to you today. I look forward to your call back on the shipping. Can't wait to get these. Thanks again,
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 12-20-2011, 02:12 PM   #14
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
Re: 13" and 14" Corvette Brakes for C10's

Boris, have you looked at the 2004-2008 CTS-V caliper? i was told the Brembo CTS-V caliper is the same as the 14" Z06.
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Old 12-20-2011, 05:12 PM   #15
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by jimmydean View Post
Boris, have you looked at the 2004-2008 CTS-V caliper? i was told the Brembo CTS-V caliper is the same as the 14" Z06.
Haven't had the opportunity yet. If I run across a set, I will mock them up.
Thanks
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 02-12-2012, 03:04 PM   #16
slimneverdies
Registered User
 
slimneverdies's Avatar
 
Join Date: Apr 2006
Location: Miami now in Vegas
Posts: 828
Re: 13" and 14" Corvette Brakes for C10's

So if I was to buy the basic starter kit but I wanted it in 6lug hubs do you supply the rotors also? What would the rotors cost and the option for a 14"'rotor. I already have z06 calipers...
Posted via Mobile Device
slimneverdies is offline   Reply With Quote
Old 06-21-2012, 10:54 PM   #17
1966JSM
Registered User
 
Join Date: Mar 2011
Location: Arizona
Posts: 124
Re: 13" and 14" Corvette Brakes for C10's

What would it cost for a the 6 lug hub and spindle's? I have the brothers trucks disc swap right now and Im wondering if I could use that spindle with your hub
1966JSM is offline   Reply With Quote
Old 06-22-2012, 01:18 PM   #18
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
Re: 13" and 14" Corvette Brakes for C10's

Boris, the Cadillac CTS-V (first gen) is the 4 pot Brembo from the first gen Z06, the same for the second gen CTS-V/Z06 6 pot. Such an awesome setup.
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Old 06-22-2012, 04:57 PM   #19
Pzary3233
Registered User
 
Join Date: Apr 2012
Location: Memphis, TN
Posts: 65
Re: 13" and 14" Corvette Brakes for C10's

The c5 z06 did not have the 4 pot brembos... They were simply red painted sliding calipers. The cool part about the brembos though is that they list for 150 or less each from the dealer. C6 z06 calipers is not a brembo...
Posted via Mobile Device
Pzary3233 is offline   Reply With Quote
Old 06-23-2012, 09:09 PM   #20
Valhalla
Registered User
 
Valhalla's Avatar
 
Join Date: Nov 2010
Location: Chandler, Arizona
Posts: 295
Re: 13" and 14" Corvette Brakes for C10's

Still making these ?
Valhalla is offline   Reply With Quote
Old 06-25-2012, 12:47 PM   #21
jimmydean
Registered User
 
jimmydean's Avatar
 
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by Pzary3233 View Post
The c5 z06 did not have the 4 pot brembos... They were simply red painted sliding calipers. The cool part about the brembos though is that they list for 150 or less each from the dealer. C6 z06 calipers is not a brembo...
Posted via Mobile Device
Quote:
Originally Posted by Pzary3233 View Post
The c5 z06 did not have the 4 pot brembos... They were simply red painted sliding calipers. The cool part about the brembos though is that they list for 150 or less each from the dealer. C6 z06 calipers is not a brembo...
Posted via Mobile Device
OK, the Gen1 CTS-V uses 4 pot Brembos, I was told the C5 Z06 was the same.

The Gen1 CTS-V (4 pot):


Gen2 CTS-V (6 pot)


Both are made by Brembo. Did GM cheap out on the Z06?
__________________
New Project: 1966 LWB C20
Plans:
1/2 ton conversion
Dropmember front
Dropmember rear
Corvette discs
Restored raised bed

http://67-72chevytrucks.com/vboard/s....php?p=4295210
jimmydean is offline   Reply With Quote
Old 06-25-2012, 01:38 PM   #22
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by 1966JSM View Post
What would it cost for a the 6 lug hub and spindle's? I have the brothers trucks disc swap right now and Im wondering if I could use that spindle with your hub
the 6 bolt hub kit and spindles will be $750, your spindles won't work
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 06-25-2012, 01:41 PM   #23
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by jimmydean View Post
Boris, the Cadillac CTS-V (first gen) is the 4 pot Brembo from the first gen Z06, the same for the second gen CTS-V/Z06 6 pot. Such an awesome setup.
I may be missing something but the vette calipers and cts-v are very different
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 06-25-2012, 01:42 PM   #24
way2lo2
way2lo2
 
way2lo2's Avatar
 
Join Date: Sep 2004
Location: Cleveland , Ohio
Posts: 803
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by Valhalla View Post
Still making these ?
yes
__________________
Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote.
216 481-5219 office
216 481-4240 fax
216 789-1647 mobile
Way2Lo2@aol.com <----also my paypal
http://www.hubgarage.com/mygarage/way2Lo2
way2lo2 is offline   Reply With Quote
Old 06-25-2012, 02:23 PM   #25
Pzary3233
Registered User
 
Join Date: Apr 2012
Location: Memphis, TN
Posts: 65
Re: 13" and 14" Corvette Brakes for C10's

Quote:
Originally Posted by jimmydean View Post
OK, the Gen1 CTS-V uses 4 pot Brembos.

The Gen1 CTS-V (4 pot):


Gen2 CTS-V (6 pot)


Both are made by Brembo. Did GM cheap out on the Z06?
Quote:
Originally Posted by way2lo2 View Post
I may be missing something but the vette calipers and cts-v are very different
Correct GM skimped out entirely on the Z06 brakes...

VERY different...


C5 Z06 Brakes - Sliding caliper brakes that are a different color from the regular C5 brakes...


C6 Z06 - 6 piston calipers, but are prone to flex and the brake pads are ridiculously expensive. Some have recently come out with some single pads instead of the "padlets" that have bee used (one pad per piston).

As far as I am aware there has never been a factory adaptation of a Brembo on a Corvette. Vette calipers are made by PBR of Australia.

This is what a lot of the F body guys are doing with that particular caliper:
http://www.ls1tech.com/forums/suspen...-kit-info.html

The newer adaptation has been the Camaro Brembos. As they are being produced currently thus they are easier to get your hand on a set.

Way2lo2 is doing us a great service by getting decent brakes on our trucks... I can't wait to see what else he comes up with. It would be great to adapt a spindle for "modular" use like some of the car spindles that simply take a bracket and you're in business with any brake setup you can imagine. What he is offering is one step closer without going to CPP modular spindles.
__________________

'55 3200 283 4 speed
'68 Pontiac Firebird Poncho powered with a 6 speed

Last edited by Pzary3233; 06-25-2012 at 02:31 PM.
Pzary3233 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com