Does anyone make patch panels for fenders? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pritch · 09-01-2012, 11:51 PM

I'm trying to decide which fender to use on my Panel build. I have a perfect driver's side and 5 imperfect passenger sides.

Here they are. The fifth one is on my green '68

On the red and white one, the front corner is gone. Other than that it's great-no major dents or rust.

The gold one has some bondo where a deer ran into it. That's what the original owner I bought it from said, anyway, and it has some rust at the front and rear seams.

The white one is shot. It's the one that came on my Panel, and it has a lot of bondo-maybe 1/4 to 3/8ths inch thick right where the eyebrow goes.

And then there's the re-pop. I'd rather not use it at all on the Panel. Maybe I'll use it on the green '68 someday. The fender that's on it has as much rust and as many dents over all as the gold one.

I've looked through a couple catalogs and they have whole fenders, but not patch panels. I'm thinking I might have to cut the white one up and use the pieces to fix the red and white one. It would be dent and rust free then.

1971custom · 09-02-2012, 02:24 AM

yes they do make them there pricey though about fiftey bucks ,plus shipping
gmc paules truck parts has them hope this helps.

Dennis

PanelDeland · 09-02-2012, 12:13 PM

I would replace the cup on the red/white one and use it.

pritch · 09-02-2012, 09:47 PM

Quote:

Originally Posted by PanelDeland

I would replace the cup on the red/white one and use it.

That's exactly what I've decided to do. I might on the patch piece 1971 Custom mentioned, but I'll probably cut it off the white one. All the damage on it is above where I'd make the cut.

Thanks, guys

HotRod C/10 · 09-02-2012, 09:59 PM

i need a passenger side fender cup if you cut up one of those fenders......

Tinkermc · 09-02-2012, 10:04 PM

with your choices I would make my own 4 sure

09-01-2012, 11:51 PM	#1
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Does anyone make patch panels for fenders? I'm trying to decide which fender to use on my Panel build. I have a perfect driver's side and 5 imperfect passenger sides. Here they are. The fifth one is on my green '68 On the red and white one, the front corner is gone. Other than that it's great-no major dents or rust. The gold one has some bondo where a deer ran into it. That's what the original owner I bought it from said, anyway, and it has some rust at the front and rear seams. The white one is shot. It's the one that came on my Panel, and it has a lot of bondo-maybe 1/4 to 3/8ths inch thick right where the eyebrow goes. And then there's the re-pop. I'd rather not use it at all on the Panel. Maybe I'll use it on the green '68 someday. The fender that's on it has as much rust and as many dents over all as the gold one. I've looked through a couple catalogs and they have whole fenders, but not patch panels. I'm thinking I might have to cut the white one up and use the pieces to fix the red and white one. It would be dent and rust free then. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

09-02-2012, 02:24 AM	#2
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: Does anyone make patch panels for fenders? yes they do make them there pricey though about fiftey bucks ,plus shipping gmc paules truck parts has them hope this helps. Dennis __________________

09-02-2012, 12:13 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Does anyone make patch panels for fenders? I would replace the cup on the red/white one and use it. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

09-02-2012, 09:59 PM	#5
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Does anyone make patch panels for fenders? i need a passenger side fender cup if you cut up one of those fenders...... __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

09-02-2012, 10:04 PM	#6
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Does anyone make patch panels for fenders? with your choices I would make my own 4 sure



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.