|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-02-2012, 11:51 PM
|
#1 |
|
Registered User
 Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
67 No Dimple Frame Power Steering bracket ?
Been reading up on adding Power Steering to a 67 and have ran into some conflicting results as to wether 67 trucks with the no dimple frame would need the aftermarket brackets made by several companies. I've seen some guys use hardened washers and grade 8 bolts and call it a day. Others say to use the bracket to avoid causing sway/play and cracking the frame with time.
Posted via Mobile Device |
|
|
|
09-02-2012, 11:57 PM
|
#2 |
|
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: 67 No Dimple Frame Power Steering bracket ?
Or you can heat it up and use a BFH to create the dimple, like a lot of guys have done.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD  Click here to support the board Philippians 4: 6-7 |
|
|
|
|
09-03-2012, 12:26 AM
|
#3 |
|
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: 67 No Dimple Frame Power Steering bracket ?
Check this out, it's the nicest adapter set up I have seen for your situation.
http://www.67-72chevytrucks.com/vboa...d.php?t=332923
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
|
|
|
|
09-03-2012, 12:53 AM
|
#4 |
|
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,806
|
Re: 67 No Dimple Frame Power Steering bracket ?
I have the same prob owning a '67. I have done some research and seen others who had bad results with a spacer causing some twitchy shimmy and vibration. apparently the spacer will pull the center link off center causing weird geometry so clearencing the frame is the option I will be going with. I am going to cut out a section and weld in a formed piece of steel rather than the BFH method.
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
|
|
|
|
09-03-2012, 01:18 AM
|
#5 |
|
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 67 No Dimple Frame Power Steering bracket ?
 The only way to do it right is to dimple the frame. Either method works, heat and BFH, or cut out and replace with dimpled piece. |
|
|
|
|
09-03-2012, 07:37 AM
|
#6 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,692
|
Re: 67 No Dimple Frame Power Steering bracket ?
One of the newest options now,... convert to rack and pinion steering.
Several vendors are selling them now.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
|
|
|
|
09-03-2012, 09:44 PM
|
#7 | |
|
Registered User
Join Date: Apr 2012
Location: So. Florida
Posts: 873
|
Re: 67 No Dimple Frame Power Steering bracket ?
Yea. Eventually that's the route I want to take. This is something for the meanwhile so the truck is drivable. Kinda why I don't want to beat up the frame.
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
