|
09-11-2012, 05:55 PM
|
#1 |
|
Proud Americano
 Join Date: May 2008
Location: CORONA,CA
Posts: 98
|
hoping for help
I've got a 66 c-10 with a 73-76(?) tilt column.it has just the ignition switch park lever and tilt lever no other controls such as wiper,cruise etc..
my question(finally)  I have a 66 impala steering wheel.I placed the wheel on the column it fits,sort of.looks as if the bottom of the wheel is gonna press down on the cover plate(alot). has anyone used one of these wheels in a 73-87 truck? thought I would ask here.I have done the search on here and other sites. thanks in advance
__________________
Tattooed Cuban Trailer Trash. putting the cart before the horse since 1964. |
|
|
|
09-11-2012, 05:57 PM
|
#2 |
|
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: hoping for help
Think I've seen a few squares with impala wheels on them. So I beleive they should fit
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
|
|
|
|
09-14-2012, 12:57 PM
|
#3 |
|
Proud Americano
Join Date: May 2008
Location: CORONA,CA
Posts: 98
|
Re: hoping for help
thanks for the reply insidous.helps me comfirm on the splines being the same......
well seems as though the splines are the same but the position of them is different,as in sitting lower on the shaft. the Impala wheel bottoms out on the dust cover plate on the column. anyone using these wheels on the 73-87 columns run into this problem? thanks
__________________
Tattooed Cuban Trailer Trash. putting the cart before the horse since 1964. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
