Thinking about purchasing an all new cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shane McGraw · 11-17-2012, 06:32 PM

for my 67 C-10

what kind of cost do you think I'm looking at?

454C10CHEVY · 11-17-2012, 06:54 PM

ask anyone parting trucks out on the parts board they will give you their prices and if not in a big rush i would wait for one to come up in your area shipping would be alot

SS Tim · 11-17-2012, 08:22 PM

If you found a NOS P/N 6272121 it is likely worth a lot more than your truck!

But if your "new cab" intention is in fact a better used cab your local market is going to pretty much set the price. Shipping as was stated is very expensive. Sometimes a deal can be found on a parts truck that may offset the cost by selling parts. Typically these are title issue vehicles.

**Boog** · 11-17-2012, 10:53 PM

One can wish Tim. If only it were that easy...

**72 tigger** · 11-17-2012, 11:05 PM

Interesting that you had to cut the A/C holes on a new cab

**special-K** · 11-18-2012, 09:26 AM

Aren't new cabs sold by Brothers or someone else? I think maybe by Dynacorn? I thought I heard that,but just checked Brothers' site and only saw Advance Design,still.

**Boog** · 11-18-2012, 11:00 AM

I think when the available supply of useable 67-72 cabs dries up they will probably start offering the new ones what with the extreme popularity of them and all.

The advanced design cabs run around $8000 so I wouldn't be surprised to see the 67-72 to run more like $15000 when offered.

pritch · 11-18-2012, 03:30 PM

Semi-decent used cabs are usually 4 or 5 hundred around here.

11-17-2012, 06:32 PM	#1
Shane McGraw Registered User Join Date: Nov 2012 Location: Poulsbo Posts: 9	Thinking about purchasing an all new cab for my 67 C-10 what kind of cost do you think I'm looking at?

11-17-2012, 06:54 PM	#2
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: Thinking about purchasing an all new cab ask anyone parting trucks out on the parts board they will give you their prices and if not in a big rush i would wait for one to come up in your area shipping would be alot __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

11-17-2012, 08:22 PM	#3
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Thinking about purchasing an all new cab If you found a NOS P/N 6272121 it is likely worth a lot more than your truck! But if your "new cab" intention is in fact a better used cab your local market is going to pretty much set the price. Shipping as was stated is very expensive. Sometimes a deal can be found on a parts truck that may offset the cost by selling parts. Typically these are title issue vehicles. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

11-17-2012, 10:53 PM	#4
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,186	Re: Thinking about purchasing an all new cab One can wish Tim. If only it were that easy... __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-17-2012, 11:05 PM	#5
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,228	Re: Thinking about purchasing an all new cab Interesting that you had to cut the A/C holes on a new cab

11-18-2012, 09:26 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Thinking about purchasing an all new cab Aren't new cabs sold by Brothers or someone else? I think maybe by Dynacorn? I thought I heard that,but just checked Brothers' site and only saw Advance Design,still. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-18-2012 at 09:42 AM.

11-18-2012, 11:00 AM	#7
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,186	Re: Thinking about purchasing an all new cab I think when the available supply of useable 67-72 cabs dries up they will probably start offering the new ones what with the extreme popularity of them and all. The advanced design cabs run around $8000 so I wouldn't be surprised to see the 67-72 to run more like $15000 when offered. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-18-2012, 03:30 PM	#8
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Thinking about purchasing an all new cab Semi-decent used cabs are usually 4 or 5 hundred around here. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.