WTB: Edelbrock 1406 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red71cheyenne · 10-20-2003, 12:29 AM

If any of the WA board members have a line on a used 1406 please keep me in mind. I have been looking at the boneyards down here, but have not had any luck. Looking to spend between 50 and a 100 bucks. Thanks, Jeff.

jacquesdean · 10-20-2003, 12:32 AM

I have a Carter AFB performance 600 cfm and a Edelbrock 1406,

$100.00 plus shipping each

red71cheyenne · 10-20-2003, 12:44 AM

Thanks Jock, I'll keep you in mind. I was hoping to get one close and avoid the shipping. Jeff.

red71cheyenne · 10-20-2003, 07:41 PM

ttt

ShamrockCustoms · 10-20-2003, 10:50 PM

I have an Ed 1406 carb, going to switch to higher cfm, so i need to sell. of course, shipping charges would be in effect........let me know....

good luck!

**COBALT** · 10-21-2003, 05:23 PM

Well, jacquesdean isn't going to like this but I have a Carter AFB 9000 series carb also just like the 1406 I rebuilt a few months ago. I got it from oldiron, and it needed a rebuilding so I gave it a serious cleaning, a rebuild kit, new floats, new choke housing and harness. Even new throttle plate screws. I was going to use it, but then my wife surprised me with a brand new 1406 for my birthday.

So, it's freshly rebuilt sitting in my 1406 box in the garage on the shelf. It's ready to go.

$100.00

I have some pics...

**COBALT** · 10-21-2003, 05:29 PM

Here's the link from last August when I first wanted to sell it. No one ended up giving me a serious reply:

http://67-72chevytrucks.com/vboard/s...threadid=66247

...and here's a pic. I have more.

red71cheyenne · 10-21-2003, 08:08 PM

Thats like the same carb isn't it? What CFM is the AFB? Thanks, Jeff.

RON WOODGEARD · 10-22-2003, 07:13 AM

Jeff, That's a 600 CFM. Very good carbs. good price too, for an electric choke.

Ron

**COBALT** · 10-22-2003, 08:18 AM

Yes, it's a 600 CFM carb.

red71cheyenne · 10-22-2003, 09:52 AM

Cobalt, I'll take the carb. My number is (360) 613-9766. I work today and then have duty tomorrow. I am off all weekend though. Let me know how we can hook up. Shamrock, thanks for looking out, but Cobalt is right around the corner. Thanks, Jeff.

**COBALT** · 10-22-2003, 11:08 AM

I'll send you a pm.

10-20-2003, 12:29 AM	#1
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	WTB: Edelbrock 1406 If any of the WA board members have a line on a used 1406 please keep me in mind. I have been looking at the boneyards down here, but have not had any luck. Looking to spend between 50 and a 100 bucks. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-20-2003, 12:32 AM	#2
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	carb I have a Carter AFB performance 600 cfm and a Edelbrock 1406, $100.00 plus shipping each __________________ Jock, Powder blasting shop, Alabama

10-20-2003, 12:44 AM	#3
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Thanks Jock, I'll keep you in mind. I was hoping to get one close and avoid the shipping. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-21-2003, 05:23 PM	#6
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Well, jacquesdean isn't going to like this but I have a Carter AFB 9000 series carb also just like the 1406 I rebuilt a few months ago. I got it from oldiron, and it needed a rebuilding so I gave it a serious cleaning, a rebuild kit, new floats, new choke housing and harness. Even new throttle plate screws. I was going to use it, but then my wife surprised me with a brand new 1406 for my birthday. So, it's freshly rebuilt sitting in my 1406 box in the garage on the shelf. It's ready to go. $100.00 I have some pics... __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-21-2003, 05:29 PM	#7
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Here's the link from last August when I first wanted to sell it. No one ended up giving me a serious reply: http://67-72chevytrucks.com/vboard/s...threadid=66247 ...and here's a pic. I have more. Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-20-2003, 07:41 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	ttt

10-20-2003, 10:50 PM	#5
ShamrockCustoms Project56 on hold Join Date: Aug 2003 Location: Burleson, TX Posts: 489	I have an Ed 1406 carb, going to switch to higher cfm, so i need to sell. of course, shipping charges would be in effect........let me know.... good luck!

10-21-2003, 08:08 PM	#8
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Thats like the same carb isn't it? What CFM is the AFB? Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-22-2003, 07:13 AM	#9
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Jeff, That's a 600 CFM. Very good carbs. good price too, for an electric choke. Ron

10-22-2003, 08:18 AM	#10
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Yes, it's a 600 CFM carb. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-22-2003, 09:52 AM	#11
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Cobalt, I'll take the carb. My number is (360) 613-9766. I work today and then have duty tomorrow. I am off all weekend though. Let me know how we can hook up. Shamrock, thanks for looking out, but Cobalt is right around the corner. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-22-2003 at 09:54 AM.

10-22-2003, 11:08 AM	#12
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I'll send you a pm. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.