Removing wiper arms..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrod70C10 · 10-24-2003, 01:31 PM

I have a quick question, Does anyone have a clue how to pull the wiper arms if there is no little release tab thing.... I went to push the pin and it broke off of my wiper arms.....

Thanks for the help guys.

**CPNE** · 10-24-2003, 01:35 PM

They are just a pressure fit over a splined shaft. You need to get under the lip and pry up. Careful of paint!. Do driver's side first as it's easier to reach and it'll give you an idea as to how to approach the passenger side which always gives me fits.

Hotrod70C10 · 10-24-2003, 01:40 PM

So if I just pry up on them they will come up?

Hotrod70C10 · 10-24-2003, 01:44 PM

Thanks CPNE! I didn't want to just pry them up, I figured they would break. I just yanked both of them off.. took a whole two seconds each lol. Thanks again!

10-24-2003, 01:31 PM	#1
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Removing wiper arms..... I have a quick question, Does anyone have a clue how to pull the wiper arms if there is no little release tab thing.... I went to push the pin and it broke off of my wiper arms..... Thanks for the help guys. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-24-2003, 01:35 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	They are just a pressure fit over a splined shaft. You need to get under the lip and pry up. Careful of paint!. Do driver's side first as it's easier to reach and it'll give you an idea as to how to approach the passenger side which always gives me fits. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

10-24-2003, 01:40 PM	#3
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	So if I just pry up on them they will come up? __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-24-2003, 01:44 PM	#4
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Thanks CPNE! I didn't want to just pry them up, I figured they would break. I just yanked both of them off.. took a whole two seconds each lol. Thanks again! __________________ 70' C-10 LWB Fleetside 4.5/6 drop



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.