FL Lots of nice upgraded Front and rear suspension and chassis parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 12-10-2012, 11:18 AM

dropped springs, drop blocks, shock relocators, super track bar, bolt in notch, control arms

I've upgraded the suspension on my 68 S/C truck (for the second time,

), and have a lot of nice upgraded suspension parts left over. All of these parts have less than 5K miles on them. I also have some left over parts from the old chassis from my son's 68.

http://67-72chevytrucks.com/vboard/s...d.php?t=358692

factory 73-87 upper & lower control arms (blasted, painted, new poly-urethane bushings and ball joints.) I had these on my 68 for approximately 5K miles but am upgrading to tubulars. Asking $225 + shipping.

I also have an original set of 68 upper and lower control arms with spindles, rotors and hubs, asking $100 for all.

Set new inner and outer tie rod ends with sleeves, $75.
Large factory sway bar with all new bushings and brackets, $125 shipped.

**SOLD**
Set of new HD rotors, new bearings and seals, and loaded calipers, ** SOLD BigcountryX ** $125
68 SWB frame, $200 **SOLD locally***
CPP boLt in notch, $125 **SOLD locally***
Porterbuilt front shock relocators, SHIPPPED!!!** SOLD NOBBY ** $55
ECE 6" dropped springs, ** SHIPPPED!!!** SOLD SHAWNO72 ** $100
2" steel drop blocks with new u bolts. SHIPPPED!!!** SOLD TSHORT1 ** $80
ECE tranny mount ** SOLD STARFIRE58 ** $75
Rear upper and lower schock relocators, $60 shipped ** SOLD RENOKEENE **
ECE super track bar, $100 ** SOLD RENOKEENE **
ECE trailing arm crossmember $175 (Note: I havent' pulled this out yet) ** SOLD RENOKEENE **

All prices are + shipping unless otherwise noted. I prefer paypal, robhartley@aol.com. Thanks,

yellowGT · 12-10-2012, 12:18 PM

I take those rear springs pending response from other seller.
Posted via Mobile Device

Number98 · 12-10-2012, 12:33 PM

Quote:

Originally Posted by Hart_Rod

Set of new HD rotors, new bearings and seals, and loaded calipers, $125

Rob, What is the deal with these? 5 lug? New, or used for 5k miles?

**Hart_Rod** · 12-10-2012, 12:42 PM

Quote:

Originally Posted by Number98

Rob, What is the deal with these? 5 lug? New, or used for 5k miles?

Sorry, 5 lug and they are new with a little surface rust.

shawno72 · 12-10-2012, 02:30 PM

$100 shipped on the rear springs?? If what would total be shipped to 95240 business addy?

starfire58 · 12-10-2012, 02:35 PM

I'll take the tranny mount pending shipping quote to 61364. Thanks. Bob

Are the tie rods for stock steering/spindles?

towbar · 12-10-2012, 02:52 PM

so what is the diameter of the "large factory" sway bar? 1.062 or 1.250?

**Nobby** · 12-10-2012, 02:55 PM

Rob, I'll take the PB front shock mounts (if still avail)..

**Hart_Rod** · 12-10-2012, 02:56 PM

Quote:

Originally Posted by shawno72

$100 shipped on the rear springs?? If what would total be shipped to 95240 business addy?

$120 shipped, I'm waiting on YellowGT.

Quote:

Originally Posted by starfire58

I'll take the tranny mount pending shipping quote to 61364. Thanks. Bob

Are the tie rods for stock steering/spindles?

How about a $100 shipped. Stock parts.

**Hart_Rod** · 12-10-2012, 02:58 PM

Quote:

Originally Posted by towbar

so what is the diameter of the "large factory" sway bar? 1.062 or 1.250?

It's the largest factory one offered. I'll measure it for you.

Quote:

Originally Posted by Nobby

Rob, I'll take the PB front shock mounts (if still avail)..

Sold!

R/

**RenoKeene** · 12-10-2012, 03:03 PM

Hey Rob, I'll take the rear shock relocators for $60 shipped and the rear crossmember when you pull it for $175, track bar for $100 and trans crossmember if it gets to me.

towbar · 12-10-2012, 03:05 PM

I think the largest on 67-72 was 1.062....73-87, which will bolt on, was 1.250....I'm no expert though, think thats what I have read on here.

shawno72 · 12-10-2012, 03:11 PM

[QUOTE=Hart_Rod;5750615]$120 shipped, I'm waiting on YellowGT.QUOTE]

Ok let me know, thank you.

**Nobby** · 12-10-2012, 03:14 PM

Payment sent on shock mounts..Thanks Rob.

**Hart_Rod** · 12-10-2012, 03:21 PM

Quote:

Originally Posted by towbar

I think the largest on 67-72 was 1.062....73-87, which will bolt on, was 1.250....I'm no expert though, think thats what I have read on here.

It might be the 73-87 one, I'll measure it when I get home.

[quote=shawno72;5750646]

Quote:

Originally Posted by Hart_Rod

$120 shipped, I'm waiting on YellowGT.QUOTE]

Ok let me know, thank you.

Will do!

Quote:

Originally Posted by Nobby

Payment sent on shock mounts..Thanks Rob.

Thanks Nobby! I'll try to get them out this weekend.

Quote:

Originally Posted by RenoKeene

Hey Rob, I'll take the rear shock relocators for $60 shipped and the rear crossmember when you pull it for $175, track bar for $100 and trans crossmember if it gets to me.

Sound good Reno. I'll let you know about the tranny crossmember. My daughter goes to school in Orlando. I could probably have her drop some of this stuff off on her way down after Christmas.

**RenoKeene** · 12-10-2012, 03:45 PM

That would be just fine. I'm gathering parts for my 67 Rat build which is a ways off so I'm in no hurry.

starfire58 · 12-10-2012, 03:57 PM

Quote:

Originally Posted by Hart_Rod

$120 shipped, I'm waiting on YellowGT.

How about a $100 shipped. Stock parts.

Is that just for trans mount crossmember, I assume. How much total shipped for inner and outer tie rods/sleeves with it?

**Hart_Rod** · 12-10-2012, 04:04 PM

Quote:

Originally Posted by starfire58

Is that just for trans mount crossmember, I assume. How much total shipped for inner and outer tie rods/sleeves with it?

How about $180 for all of it?

BigCountryx · 12-10-2012, 06:04 PM

I'll take the front brake setup pending shipping prices to 70769. Shoot be a pm Rob.
Posted via Mobile Device

**Hart_Rod** · 12-10-2012, 06:53 PM

Quote:

Originally Posted by towbar

so what is the diameter of the "large factory" sway bar? 1.062 or 1.250?

The sway Miched out to 1 1/16". LMK

Quote:

Originally Posted by BigCountryx

I'll take the front brake setup pending shipping prices to 70769. Shoot be a pm Rob.
Posted via Mobile Device

I'm waiting on a reply from Number98, and then I'll get you a quote.
Posted via Mobile Device

Tshort1 · 12-10-2012, 07:26 PM

I will take these 2" steel drop blocks with new u bolts, if you will take $85 shipped to 27863?

**Hart_Rod** · 12-10-2012, 07:36 PM

Quote:

Originally Posted by Tshort1

I will take these 2" steel drop blocks with new u bolts, if you will take $85 shipped to 27863?

$90 and you got a deal,

.

Tshort1 · 12-10-2012, 07:38 PM

Done $90 it is. I will Pay pal you right now.

starfire58 · 12-10-2012, 08:10 PM

I'm going to pass on the tie rods for now. Would you do $90 shipped on the trans mount?

**Hart_Rod** · 12-10-2012, 08:52 PM

Quote:

Originally Posted by Tshort1

Done $90 it is. I will Pay pal you right now.

Thanks!

Quote:

Originally Posted by starfire58

I'm going to pass on the tie rods for now. Would you do $90 shipped on the trans mount?

How about $160?
Posted via Mobile Device

12-10-2012, 11:18 AM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Lots of nice upgraded Front and rear suspension and chassis parts dropped springs, drop blocks, shock relocators, super track bar, bolt in notch, control arms I've upgraded the suspension on my 68 S/C truck (for the second time, ), and have a lot of nice upgraded suspension parts left over. All of these parts have less than 5K miles on them. I also have some left over parts from the old chassis from my son's 68. http://67-72chevytrucks.com/vboard/s...d.php?t=358692 factory 73-87 upper & lower control arms (blasted, painted, new poly-urethane bushings and ball joints.) I had these on my 68 for approximately 5K miles but am upgrading to tubulars. Asking $225 + shipping. I also have an original set of 68 upper and lower control arms with spindles, rotors and hubs, asking $100 for all. Set new inner and outer tie rod ends with sleeves, $75. Large factory sway bar with all new bushings and brackets, $125 shipped. SOLD Set of new HD rotors, new bearings and seals, and loaded calipers, SOLD BigcountryX $125 68 SWB frame, $200 SOLD locally* CPP boLt in notch, $125 SOLD locally* Porterbuilt front shock relocators, SHIPPPED!!! SOLD NOBBY $55 ECE 6" dropped springs, SHIPPPED!!! SOLD SHAWNO72 $100 2" steel drop blocks with new u bolts. SHIPPPED!!! SOLD TSHORT1 $80 ECE tranny mount SOLD STARFIRE58 $75 Rear upper and lower schock relocators, $60 shipped SOLD RENOKEENE ECE super track bar, $100 SOLD RENOKEENE ECE trailing arm crossmember $175 (Note: I havent' pulled this out yet) SOLD RENOKEENE ** All prices are + shipping unless otherwise noted. I prefer paypal, robhartley@aol.com. Thanks, Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-19-2012 at 10:23 AM.

12-10-2012, 12:18 PM	#2
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Lots of nice upgraded Front and rear suspension and chassis parts I take those rear springs pending response from other seller. Posted via Mobile Device __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

12-10-2012, 02:30 PM	#5
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Lots of nice upgraded Front and rear suspension and chassis parts $100 shipped on the rear springs?? If what would total be shipped to 95240 business addy? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" Last edited by shawno72; 12-10-2012 at 02:37 PM.

12-10-2012, 02:35 PM	#6
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Lots of nice upgraded Front and rear suspension and chassis parts I'll take the tranny mount pending shipping quote to 61364. Thanks. Bob Are the tie rods for stock steering/spindles? Last edited by starfire58; 12-10-2012 at 02:37 PM. Reason: question

12-10-2012, 02:52 PM	#7
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Lots of nice upgraded Front and rear suspension and chassis parts so what is the diameter of the "large factory" sway bar? 1.062 or 1.250?

12-10-2012, 02:55 PM	#8
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Lots of nice upgraded Front and rear suspension and chassis parts Rob, I'll take the PB front shock mounts (if still avail)..

12-10-2012, 03:03 PM	#11
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Lots of nice upgraded Front and rear suspension and chassis parts Hey Rob, I'll take the rear shock relocators for $60 shipped and the rear crossmember when you pull it for $175, track bar for $100 and trans crossmember if it gets to me. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

12-10-2012, 03:05 PM	#12
towbar Registered User Join Date: Jul 2012 Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!! Posts: 537	Re: Lots of nice upgraded Front and rear suspension and chassis parts I think the largest on 67-72 was 1.062....73-87, which will bolt on, was 1.250....I'm no expert though, think thats what I have read on here.

12-10-2012, 03:11 PM	#13
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Lots of nice upgraded Front and rear suspension and chassis parts [QUOTE=Hart_Rod;5750615]$120 shipped, I'm waiting on YellowGT.QUOTE] Ok let me know, thank you. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-10-2012, 03:14 PM	#14
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Lots of nice upgraded Front and rear suspension and chassis parts Payment sent on shock mounts..Thanks Rob.

12-10-2012, 03:45 PM	#16
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,028	Re: Lots of nice upgraded Front and rear suspension and chassis parts That would be just fine. I'm gathering parts for my 67 Rat build which is a ways off so I'm in no hurry. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

12-10-2012, 06:04 PM	#19
BigCountryx Registered User Join Date: May 2009 Location: Gonzales, LA Posts: 779	Re: Lots of nice upgraded Front and rear suspension and chassis parts I'll take the front brake setup pending shipping prices to 70769. Shoot be a pm Rob. Posted via Mobile Device __________________ 1972 Pale Yella 2WD Blazer ..... 350HO/700R4.... '68 Clipped 1970 Original Paint SWB Farm Truck ..... 5.3/4L80.... 2x HRPT Participant

12-10-2012, 07:26 PM	#21
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: Lots of nice upgraded Front and rear suspension and chassis parts I will take these 2" steel drop blocks with new u bolts, if you will take $85 shipped to 27863?

12-10-2012, 07:38 PM	#23
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: Lots of nice upgraded Front and rear suspension and chassis parts Done $90 it is. I will Pay pal you right now.

12-10-2012, 08:10 PM	#24
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Lots of nice upgraded Front and rear suspension and chassis parts I'm going to pass on the tie rods for now. Would you do $90 shipped on the trans mount?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.