Project NORUSH - 71 Build - Nothing but the Best

[BogeyBoy82]

Always dreamed of building a 71/72 C10. Bought a 71 K5 2wd in July. Flipped it a couple months later. Bought a 70 half-done project. Flipped it 2 weeks later. Finally settled on what's described below.

She started out as a damn nice built '71 C-10 SWB with a 6.0 Swap and a half-resto done. Upone getting truck it was nice, but I wanted it perfect. I'm going for a Pro-Touring Cruiser that a 70 Year old or a 17 Year old would kill to have. Cory Scott with Kustom Werx in Conroe, TX is doing the build. He has built some of the baddest most recognized classic trucks in the Street Truck world for decades. You may not know his name but you would recognize his work. It's the best and it aint cheap lol.

My last name is RUSH hence NORUSH but truthfully build will be done in less than 6 more months (started 3 months ago). Literally not sparing any expense or cutting any corners. Suggestions are welcome b/c this is my first classic build.


List of Purchased Items:

• 71 C-10 with LQ4 6.0 Swap Complete
  Full Pro-Touring Mild Coil-Over Front/Rear Porterbuilt Suspension
  Wilwood 6 Piston / 4 Piston Brakes
  New Sheetmetal
  Wood Bed kit
  Wood Wheel
  Hidden A/C System (behind Dash not Under)
  Rear Chrome Sport Bumper
  Classic Trim
  Custom Gas Tank
  New Smooth Tailgate (old one dented)
  Seat Belts
  Headliner

List of Work to Be Done:

• Complete Frame Off - Off Frame now lol...
  Powdercoating of Entire Chassis/Suspension in Matte Wrinkle Black - Complete
  Body Work and Make Sheetmetal Flawless
  Lay Down a Perfect Paint job
  Re-Assemble, Install New Parts, Etc
  Re-Do Interior with custom door panels, bolstered Chevelle Bucket Seats (Black and Houndstooth), etc

Undecideds:

• Wheels - Leaning Hard Towards Intro West Coast with Satin Finish Accents like the ones pictured below. 20/22x10 with nice fat lip on 315s or Maybe go 20x12 rear with 345s
  Paint Color - Was gonna classic Two-Tone White/Black. Then went to straight black. Now I'm 99% set on Chevelle Shadow Gray, maybe with black center two-tone but most likely solid...
  Rear End - To narrow or not to narrow. Already has a 3.73 with Posi in it.
  Motor Mods - L92 Heads, Cam, and Tune. Not sure if it truely needs it but would be the cherry on top.
  Wood Stain Color - Wanted to go classic chevy stain but thinking black stain or gray stain in bed with the wheel to match.

Obviously this aint everything but it's a damn good start. I'm really open to ideas and input since I'm going balls deep on my first classic build. I'm no foreigner to the modded Chevy world, but this territory is a little unfamiliar. Like I said this build should be one for the record books. I know a lot of these get started and never get done and are a lot more fluff than fact but no bull this is gonna be a good one fellas.

Pics so far....

As she started....


Rear Shot as she started...good pallet but not perfect lol....


LQ4 swap (6.0 like Ls2) already done. Runs great.


Have original un-cut dash going in and hidden a/c


Bench has gotta go...


Let the Madness Begin....


Oh hell...rip the motor out let's powdercoat everything....


No Turning Back now....


F me....


Wheels I'm leaning Hard toward. Like the Boss but the lip is tiny and want Billets. Kinda wanna do HRE but these have such a classic look to them and no one else really has done them yet...Wheels also kinda look like Old Chevelle SS Wheels and that's the theme I'm kinda going towards


99% Sure on this color. Chevelle Shadow Gray. Thought about some type of black stripe or accent to tie in theme more. Most likely nixing that idea..



More Pics to Come....

[BogeyBoy82]

Spot Saver for Future Updated Pictures

[RWB-713]

Definitly following along, sounds like a great plan you have to start!
Posted via Mobile Device

[Ghostryder79]

Looks like an awesome build. If you weren't in TX, I'd be all over you trying to figure out how to pick up that seat

[Chvy2NV]

cool build.. what are some of your plans for her..

[trashmanryan]

I'm following this one
Posted via Mobile Device
Posted via Mobile Device

[LEX]

I like your plan. I recognize that truck.
Posted via Mobile Device

[67cheby]

NICE , i am in for the ride !

[BogeyBoy82]

Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.

[BogeyBoy82]

Ok some progress pics....Everything powdercoated textured matte black. Full Porterbuilt coilover and Wilwoods went on today.

[CC69Rat]

Subscribed. Nice build!

[daves72C10D]

Yea, it is really going to be nice.

[BogeyBoy82]

I keep going back and forth between Chevelle Gray and my original plans....I'm 99.9% sure i'm going white/black/white/black two tone with trim. So torn. Love this truck below. It was my original inspiration for the build....

Take a look at this sucker. Truly a work of art if you haven't seen it

http://www.philferrarihotrods.com/pr...touring-pickup

[STOCKISH]

This truck is going to be sick, Im a big fan of the two tone. Big Al 71, where ya at man, this is all you.

[BogeyBoy82]

Originally Posted by 1972SuperCheyenne

This truck is going to be sick, Im a big fan of the two tone. Big Al 71, where ya at man, this is all you.

I tried to get Big Al to part with his before I started this lol. He keeps texting me white/black two tone pics to taunt/tempt me lol.

I want the full 71/72 trim no matter what paint choice I go but the choices are

1. Black/White Two Tone (roof white or black????)

2. All Shadow Grey (1970 Chevelle color above)

3. All Jet Black. (never gets old in my book)

[effects66]

Originally Posted by BogeyBoy82

Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.

Great looking build so far!!! Nice selection on the rims, I was debating on the exact same two for the past 6 months. Still havent made my mind up as of yet but have been leaning on the Billet Specialties for a bit now. My build is getting close that I will have to start to pick the wheels soon.


____________

My Build:

1970 C10, 550hp LSX:
http://67-72chevytrucks.com/vboard/s...d.php?t=556610

[builtbyKane]

Truck looked great to start. Can't wait to see the progress on this build.
Posted via Mobile Device

[67cheby]

looking great so far !

[RRC]

Nice choice of wheels I was thinking about using those too. Can't wait to see them on your truck!!!
Posted via Mobile Device

[BogeyBoy82]

Wheels arrived today. Waiting on rubber and then the rolling chassis will be complete. The body is all prepped to be sprayed as well.

[OTIS HURTS]

looks great

[LEX]

Nice

[effects66]

Originally Posted by BogeyBoy82

Everything is back from powdercoat and being assmembled. Should be a roller by end of next week.


Went ahead and orderd the wheels on friday..

Billet Specialties Mag-G - 20x8.5 and 20x10. Gonna go 315/35 in rear. Wanted to go 12" wide but tire selection was crap and really wanted to not get too wild with it.

What backspacing did you go with

[BogeyBoy82]

5.5 on rear I believe

[Rusbuilt]

Subscribed! Looking good sir!