![]() |
![]() |
#1 |
Registered User
Join Date: Mar 2013
Location: Chula Vista (SD) CA
Posts: 50
|
economy out of a carb
Looking for input on size more than brand. In the process of resurrecting the strait 6 4.1 in the 69 C10 Step right now. Looking for economy out of the whole set up. Recommendations?
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2013
Location: El Cajon California
Posts: 10
|
Re: economy out of a carb
I dont..but I wanted to say what up to a local!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: economy out of a carb
Go with a quality rebuild of the stock carb.. Depending on how you drive it along with the gears and tires are going to be the biggest influence.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#4 |
Registered Cruiser
Join Date: May 2002
Location: Las Vegas NV
Posts: 2,230
|
Re: economy out of a carb
Those old monojet's that came stock will suck some gas. Economy wasn't a concern back then. There are plenty of carburetors that will yield better mileage, but finding the proper intake might be more of a problem. There are many 4bbl, and multiple carb manifolds available, but I don't know of any that would accept a 2bbl. I use one of these Holley 390 cfm 4bbl, and get very good mileage from a 305. It's the same four barrel that they spec for 6 bangers.
__________________
I intend to live forever. So far, so good. |
![]() |
![]() |
![]() |
#5 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: economy out of a carb
Someone retrofitted a EFI to a 6.I would think the 4 BBL manifold would accept the TBI set up from a 4.3 and be fairly ecoonomical.Keep in mind that no matter what you do for fuel economy that payback is usually a long long ways out.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: May 2011
Location: Long Island NY
Posts: 787
|
Re: economy out of a carb
throw a 2004r overdrive behind it. Drop your Highway rpms from 3000 to 1900. best way to save fuel I found so far. except now the truck does 70-75 too easy.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,151
|
Re: economy out of a carb
If you want economy, Fuel Injection is the way to go. Howell makes kits for 6cyl or you can probably create your own from a 4.3.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2010
Location: konawa ok/oakdale Ca.
Posts: 1,651
|
Re: economy out of a carb
If you do deciede to get a rebuilt carb.Dont buy one from the local autozone.I got a qjet from them and had nothing but problems.I had to have it rebuilt again and the guy who rebuilt it said it shouldn't have been rebuilt the first time.It looked very crappy in there.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|