700 R4 bracket for a 230 6 cylinder

[sigshooter]

I have a 65 with a 230 6cyl. I currently have a 350 turbo tranny in it and I am looking for a bracket that will hook up either the kickdown cable from the t-350 or the tv cable for the 700 r to the one barrel carb of my 6 cylinder


once again need to hook up the tranny cable to a one barrel carb, does anyone make this?

[ACK]

I couldn't find a bracket to hook up the kickdown cable on my TH350 to my 6 cylinder, so I fabricated one. It was easy to create and it works great. If you're interested in the rough schematic shown in the 1st picture, let me know.

[KVB]

I am interested in your schematic, could you send it to me please.

Thanks

Ken

[xxlf250]

dont want seem like Iam highjacking your thread but I need that also how much for your schematic?

[gmcdeadhead]

i could also use a schematic, pm sent.

[sigshooter]

That looks like it would work. If you dont mind send me the info.

I would like to find ( if it even exists ) a factory looking bracket, maybe something of a early to mid seventies truck or car..... I cant ever remember seeing an auto behind a six with our style carb and intake set up...

I have seen plenty of the integrated head models, but not our seperate intake and carb

[ACK]

Here's a PDF with measurements and basic instructions, also a photo showing where the 2 brackets attach. I made the piece on the throttle linkage pretty beefy so it wouldn't flex when it engages the cable.

I have not found any after market ones that can do the job. I've heard older Nova 6's have kick down brackets that may work.

[gmcdeadhead]

thanks ACK, i downloaded the pdf , now send me the 700r4 trans and i'll hook every thing up, thanks,