I need help with GM part numbers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rs74** · 04-02-2013, 10:04 AM

I have two new GM doors and need to see if they were made as manual or power window doors. At least I thought that they made them different. The numbers are 15571643 and 15571644. Does anyone have that information. Keith? I also have two new GM fenders but don't have any worries about them.

**1774btcrew** · 04-02-2013, 10:20 AM

The doors are the same. You just use a hole saw to drill for the power window harness. The doors are pre dimpled for drilling.

**rs74** · 04-02-2013, 11:08 AM

I figured that there was different access holes for the manual window crank verse the power window. I have not had either one of these doors apart for a long time so I don't remember what they inside looks like between the two.

motornut · 04-02-2013, 01:38 PM

this is the door panel from my 89 burb ,power/power(dirt around square from switch)
now in the 78, the crank comes right out,same spot

**rs74** · 04-02-2013, 07:22 PM

Quote:

Originally Posted by motornut

this is the door panel from my 89 burb ,power/power(dirt around square from switch)
now in the 78, the crank comes right out,same spot

I am getting off the subject here. So if what you showing is correct then can I take a manual door panel and put in my switches if they are in the same places. I realize that I would have to square out the hole since the manual is round. Does that make since. I am stripping an interior tomorrow that has some nice gray manual door panels and I have power windows and locks. I can just modify the manual panels to make them work since they are in good shape.

motornut · 04-02-2013, 08:52 PM

Quote:

Originally Posted by rs74

I am getting off the subject here. So if what you showing is correct then can I take a manual door panel and put in my switches if they are in the same places. I realize that I would have to square out the hole since the manual is round. Does that make since. I am stripping an interior tomorrow that has some nice gray manual door panels and I have power windows and locks. I can just modify the manual panels to make them work since they are in good shape.

yes,should work out fine

this is the drivers,left is power windows(has the big switch hole),right is just power locks

04-02-2013, 10:04 AM	#1
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	I need help with GM part numbers I have two new GM doors and need to see if they were made as manual or power window doors. At least I thought that they made them different. The numbers are 15571643 and 15571644. Does anyone have that information. Keith? I also have two new GM fenders but don't have any worries about them. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

04-02-2013, 10:20 AM	#2
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,557	Re: I need help with GM part numbers The doors are the same. You just use a hole saw to drill for the power window harness. The doors are pre dimpled for drilling. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-02-2013, 11:08 AM	#3
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: I need help with GM part numbers I figured that there was different access holes for the manual window crank verse the power window. I have not had either one of these doors apart for a long time so I don't remember what they inside looks like between the two. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

04-02-2013, 01:38 PM	#4
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: I need help with GM part numbers this is the door panel from my 89 burb ,power/power(dirt around square from switch) now in the 78, the crank comes right out,same spot Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.