Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-27-2013, 08:10 PM | #1 |
Registered User
Join Date: Apr 2013
Location: Guntersville, AL
Posts: 24
|
New Member - Old person :) '72 SWB Fleetside Project
I've been lurking for a couple weeks now and I just got this '72 project truck yesterday so I thought I'd join in the conversation now. I've seen this truck sitting out behind a house that is only about 1/2 mile from me. This truck sat outside and never moved for several years. The owner drove a newer truck and didn't seem interested in this one so I made him an offer and he agreed. I traded him a nice S&W .50 Cal. Revolver and $700.00 for the truck. The truck needs lots of body panel work but it has a very healthy 350c.i. engine with a mild cam, aluminum intake and new Rochester carb. The only draw back is that this truck was obviously meant to be strictly a work truck because it has no PS or PB and it has a three speed on the column. I'm 63 years old and the first vehicle I ever purchased (in 1968) was a 1963 Chevrolet Biscayne 2-door. It also didn't have PS or PB and it was a three speed on the column too .. but it had a 409 c.i. engine in it! I paid $500.00 for that car and it was in great shape!
Today I swept out and vacuumed the truck (the owner had the bed full of garbage, beer bottles, etc..) I then stripped off the doors, step bumper, tailgate, hood and cowl. I think the only parts that I'm going to totally replace are the two front fenders (and one inner fender) but everything else I can use. I will have to do a lot of cutting out and patching in the cab but, from reading the forums, it sounds like that's not unusual for this year truck. I was amazed how solid the bed is seeing as it sat outside for years collecting water in it. My next step is to remove the bed .. possibly tomorrow with the help of my son who lives next door. One other thing I'm very big on is keeping your work area clean. I've noticed that a lot of the members here feel the same way. Here are a few pictures from yesterday and today. Let me know what you think about it. Oh, one more thing, I would like the advice of the members about possibly putting an automatic in the truck and replacing the "three on the tree". |
04-27-2013, 08:22 PM | #2 |
Registered User
Join Date: Dec 2012
Location: S/W Missouri
Posts: 121
|
Re: New Member - Old person :) '72 SWB Fleetside Project
Welcome! Nice truck!
__________________
1972 C10 CST LWB |
04-27-2013, 08:26 PM | #3 |
Senior Member
Join Date: Feb 2011
Location: Corona, CA
Posts: 1,841
|
Re: New Member - Old person :) '72 SWB Fleetside Project
Welcome Route-66 from SoCal. I wish my garage was that spotless. A great baseline for what will be a nice truck.
__________________
MusicMan70 1961 GMC Suburban |
04-27-2013, 08:37 PM | #4 |
Registered User
Join Date: Apr 2013
Location: Guntersville, AL
Posts: 24
|
Re: New Member - Old person :) '72 SWB Fleetside Project
|
04-27-2013, 08:59 PM | #5 |
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,433
|
Re: New Member - Old person :) '72 SWB Fleetside Project
R66, welcome aboard.
You've got a good starter. As for the trans, depends on what your intentions are for the truck. If it has a low rear gear you might want to entertain the idea of an overdrive trans. If it has a 3.08 or so gear a plain T350 auto will do fine. The bellhousing crossmember will have to be taken out, riveted from the factory and an auto trans crossmember sourced and installed under the rear of the tranny. You know what to do about the tree.
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
04-27-2013, 09:42 PM | #6 |
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: New Member - Old person :) '72 SWB Fleetside Project
Route-66..Welcome to the forum from Texas..looks like you have a good truck to have fun with....love the shop you have....good luck on your build. lots of good info here and great people..
|
Bookmarks |
Tags |
1972 c10, new member |
|
|