Jacking Decal Part No.3937384 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GJB** · 04-27-2013, 12:16 AM

Does anyone know if anyone makes this decal? All the repros I have seen are Part No. 3937381.

MRcamaro · 04-27-2013, 12:56 AM

My GF drafted me some for my welder, printed them out on sticker printer paper and came out really nice. Sure it wouldn't be that hard to make.
Posted via Mobile Device

**GJB** · 04-27-2013, 11:00 AM

Yeah I might end up doing that if nobody else has already made a repro. But I figure I can't be the only one looking for the original style of this decal....right?
Posted via Mobile Device

**GJB** · 05-03-2013, 03:40 PM

Anyone?

1972SUPERSB · 05-03-2013, 04:21 PM

I'm pretty sure I got mine from classic parts. Here is mine
Posted via Mobile Device
Posted via Mobile Device

1972SUPERSB · 05-03-2013, 04:25 PM

I just checked got it from LMC truck part # 38-0190
Posted via Mobile Device

**LockDoc** · 05-03-2013, 04:48 PM

Quote:

Originally Posted by MRcamaro

My GF drafted me some for my welder, printed them out on sticker printer paper and came out really nice. Sure it wouldn't be that hard to make.

You would be wrong. I made one for my '67 & the '68 with Buddy Buckets since they are not reproduced and I can tell you for a fact that I have a LOT of hours in making it.

http://67-72chevytrucks.com/vboard/s...d.php?t=487029

If you will notice the pictures GJB and 72SUPERSB posted have differences other than just the part number...

LockDoc

1972SUPERSB · 05-03-2013, 04:50 PM

Mine says part # 3937384 but yeah there are some differences from original and reproduction
Posted via Mobile Device

**GJB** · 05-03-2013, 05:19 PM

Yes, there are some differences for sure in the font and diagram. However it is far better than the generic 3937381 that most seem to be selling as the correct decal for 67 -72. Thanks!

1972SUPERSB · 05-03-2013, 05:20 PM

No problem
Posted via Mobile Device

MRcamaro · 05-12-2013, 01:39 AM

Quote:

Originally Posted by LockDoc

You would be wrong. I made one for my '67 & the '68 with Buddy Buckets since they are not reproduced and I can tell you for a fact that I have a LOT of hours in making it.

http://67-72chevytrucks.com/vboard/s...d.php?t=487029

If you will notice the pictures GJB and 72SUPERSB posted have differences other than just the part number...

LockDoc

I'd have to kindly disagree, my Gf did the whole set for my welder in about 8 hours. Front plate sticker from scratch, inside wiring diagram sticker, and inner spec sheet sticker, and thats only because it was hard to get the dimensions of the switches to match up. She is a professional drafter that does it all day at work with a $5k software program so pretty sure she is better equiped than most. It can be done but the time to put into it (about 8 hours for her) is not worth it because I just seen LMC has em' for $3.95.
Posted via Mobile Device

04-27-2013, 12:16 AM	#1
GJB Active Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 197	Jacking Decal Part No.3937384 Does anyone know if anyone makes this decal? All the repros I have seen are Part No. 3937381. Attached Images

04-27-2013, 12:56 AM	#2
MRcamaro Registered User Join Date: Apr 2013 Location: Las Vegas Nevada Posts: 53	Re: Jacking Decal Part No.3937384 My GF drafted me some for my welder, printed them out on sticker printer paper and came out really nice. Sure it wouldn't be that hard to make. Posted via Mobile Device Last edited by MRcamaro; 04-27-2013 at 01:05 AM.

04-27-2013, 11:00 AM	#3
GJB Active Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 197	Re: Jacking Decal Part No.3937384 Yeah I might end up doing that if nobody else has already made a repro. But I figure I can't be the only one looking for the original style of this decal....right? Posted via Mobile Device

05-03-2013, 03:40 PM	#4
GJB Active Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 197	Re: Jacking Decal Part No.3937384 Anyone?

05-03-2013, 04:21 PM	#5
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Jacking Decal Part No.3937384 I'm pretty sure I got mine from classic parts. Here is mine Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-03-2013, 04:25 PM	#6
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Jacking Decal Part No.3937384 I just checked got it from LMC truck part # 38-0190 Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-03-2013, 04:50 PM	#8
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Jacking Decal Part No.3937384 Mine says part # 3937384 but yeah there are some differences from original and reproduction Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior

05-03-2013, 05:19 PM	#9
GJB Active Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 197	Re: Jacking Decal Part No.3937384 Yes, there are some differences for sure in the font and diagram. However it is far better than the generic 3937381 that most seem to be selling as the correct decal for 67 -72. Thanks!

05-03-2013, 05:20 PM	#10
1972SUPERSB Registered User Join Date: Sep 2012 Location: San Antonio, TX Posts: 1,026	Re: Jacking Decal Part No.3937384 No problem Posted via Mobile Device __________________ Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.