Big block tall valve covers on our trucks? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

frost89434 · 11-22-2003, 03:00 PM

Has anybody been able to put tall valve covers on our trucks?

If so pics would be great. Thanks jim

miket · 11-22-2003, 03:36 PM

I second that request....I see where there might be intereference with the alternator and brake booster.

Cat Fuzz · 11-22-2003, 03:41 PM

I have only slightly taller aluminum valve covers on my truck, and I have to remove the D. side one in order to remove the alternator belt. I have a digi-cam if you want a pic. I don't have power brakes though.

frost89434 · 11-22-2003, 04:41 PM

A pic would be great.

My e-mail is kenw777392@iwon.com
Thanks jim

guitarornothin · 11-22-2003, 09:44 PM

Im building a 468 for my truck and i want to go to tall valve covers(for the Roller rocker arms). i have a brake booster and didnt even think that it woiuld interfere with using tall valve covers.

Please send me the pic too
Ryan_foust@hotmail.com

Cat Fuzz · 11-22-2003, 11:28 PM

Oh, wait. I didn't see the big block part of your post. Mine is a small block 327.

**FRENCHBLUE72** · 11-22-2003, 11:31 PM

How about the heater box That is pretty damn close on my 454 with short valve cover's.

Jeff M. · 11-23-2003, 12:23 AM

I've got the M/T's alum. on mine. Fit fine. That's with factory a/c and power brakes. I'm able to remove them in the truck. Driver's side takes a little creative jimmying but I have removed it a few times to adjust the valves.

frost89434 · 11-23-2003, 12:45 AM

Jeff M.> could I possibly get some pics?

72 CustomCamper · 11-23-2003, 01:47 AM

I've got the tall GM covers on mine. tight but everything clears...

Chuck

mikep684x4 · 11-23-2003, 01:58 AM

I just dropped my 454 out of my boat in my 71 long bed.The stud girdels make it hard to get the covers off but I can do it. Its also a non-ac cab so there's more room. My 68 is AC and the 454 hit on the pass side so I had to glass a "cubby" in the condenser cover to accomidate the taller covers. I'll try to send some pics. I've been trying to post pics for a year now and still to dumb to get it right.

Jeff M. · 11-23-2003, 02:22 AM

Frost, I'm having no luck with the pics.... Anyway, the pass side even with the big a/c box doesn't have a problem. I'm also running crane roller rockers. Check the web site on my signature and there is one pic of the engine in the truck. Not a very good one but that's my son's site.

*rage'nrat638* · 11-23-2003, 10:50 AM

well i take it the covers arn't fitting into the truck.....man whats next????? always something

in may 85 with the tall block....
converterd to a older chevy under the floor type....
from M.P. BRAKES

to clear.....7" booster w/ the master cly....

*rage'nrat638* · 11-23-2003, 10:52 AM

here's another

frost89434 · 11-23-2003, 02:19 PM

rage'nrat638> Yeah I am having problems. It's not with the brake booster or anything it's with the firewall. The covers hit the firewall before they go on all the way.

But no worries I am a welder fabricator.

I will make it work

JIM

72 CustomCamper · 11-24-2003, 12:56 AM

Mine has about 3 fingers width between the covers and the firewall. It could be because I'm usine the 72 smallblock towers...

Chuck

11-22-2003, 03:00 PM	#1
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	Big block tall valve covers on our trucks? Has anybody been able to put tall valve covers on our trucks? If so pics would be great. Thanks jim __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada

11-22-2003, 03:36 PM	#2
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	I second that request....I see where there might be intereference with the alternator and brake booster. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

11-22-2003, 04:41 PM	#4
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	A pic would be great. My e-mail is kenw777392@iwon.com Thanks jim __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada

11-22-2003, 09:44 PM	#5
guitarornothin RUNN over AGAIN!!! Join Date: Jun 2003 Location: Big Spring, Texas Posts: 505	Im building a 468 for my truck and i want to go to tall valve covers(for the Roller rocker arms). i have a brake booster and didnt even think that it woiuld interfere with using tall valve covers. Please send me the pic too Ryan_foust@hotmail.com __________________ 67-72 TRUCKS ROCK 70 SWB shaved and a 72 front clip.and a poly tank. Peep mirrors and a BIG BLOCK 468 in the making. XNXNXNXNXNXNXNXNXNXNX ,/. EMAIL ME HERE!, Dont pm me please ,/.

11-22-2003, 11:31 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	How about the heater box That is pretty damn close on my 454 with short valve cover's. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-22-2003, 03:41 PM	#3
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	I have only slightly taller aluminum valve covers on my truck, and I have to remove the D. side one in order to remove the alternator belt. I have a digi-cam if you want a pic. I don't have power brakes though.

11-22-2003, 11:28 PM	#6
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	Oh, wait. I didn't see the big block part of your post. Mine is a small block 327.

11-23-2003, 12:23 AM	#8
Jeff M. Registered User Join Date: Feb 2000 Location: Pixley, Ca. Posts: 486	I've got the M/T's alum. on mine. Fit fine. That's with factory a/c and power brakes. I'm able to remove them in the truck. Driver's side takes a little creative jimmying but I have removed it a few times to adjust the valves. __________________ 69 C-10 CST Short Fleet, Factory Air, BB427-400 Auto-2400 stall-tilt-cruise-Tach & Vac Gagues, 4/6 drop, power one piece side windows, Eaton posi.

11-23-2003, 12:45 AM	#9
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	Jeff M.> could I possibly get some pics? __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada

11-23-2003, 01:47 AM	#10
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	I've got the tall GM covers on mine. tight but everything clears... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

11-23-2003, 01:58 AM	#11
mikep684x4 Seeker of the big and bad Join Date: Nov 2000 Location: wheatland,Calif,yuba Posts: 105	I just dropped my 454 out of my boat in my 71 long bed.The stud girdels make it hard to get the covers off but I can do it. Its also a non-ac cab so there's more room. My 68 is AC and the 454 hit on the pass side so I had to glass a "cubby" in the condenser cover to accomidate the taller covers. I'll try to send some pics. I've been trying to post pics for a year now and still to dumb to get it right. __________________ 71 3/4 ton 4x4,665hp 454. 67 GMC 1 ton towtruck 68 chevy LB 4x4 64 chevy LB custom 57 Bel-air 2d station wagon

11-23-2003, 02:22 AM	#12
Jeff M. Registered User Join Date: Feb 2000 Location: Pixley, Ca. Posts: 486	Frost, I'm having no luck with the pics.... Anyway, the pass side even with the big a/c box doesn't have a problem. I'm also running crane roller rockers. Check the web site on my signature and there is one pic of the engine in the truck. Not a very good one but that's my son's site. __________________ 69 C-10 CST Short Fleet, Factory Air, BB427-400 Auto-2400 stall-tilt-cruise-Tach & Vac Gagues, 4/6 drop, power one piece side windows, Eaton posi.

11-23-2003, 10:50 AM	#13
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	well i take it the covers arn't fitting into the truck.....man whats next????? always something in may 85 with the tall block.... converterd to a older chevy under the floor type.... from M.P. BRAKES to clear.....7" booster w/ the master cly.... Last edited by rage'nrat638; 07-12-2007 at 07:08 AM.

11-23-2003, 10:52 AM	#14
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	here's another Last edited by rage'nrat638; 07-12-2007 at 07:08 AM.

11-23-2003, 02:19 PM	#15
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	rage'nrat638> Yeah I am having problems. It's not with the brake booster or anything it's with the firewall. The covers hit the firewall before they go on all the way. But no worries I am a welder fabricator. I will make it work JIM __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada



Register or Log In To remove these advertisements.

11-24-2003, 12:56 AM	#16
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	Mine has about 3 fingers width between the covers and the firewall. It could be because I'm usine the 72 smallblock towers... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

Register or Log In To remove these advertisements.