Front Bowtie - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72afr** · 11-20-2003, 01:50 AM

Does anyone know how to change the color of the bowtie on the grille (blue looks good and all, but red would look better)

11-20-2003, 03:37 AM

Krylon

WRMZ71 · 11-22-2003, 11:38 PM

I painted mine grabber green. Just remove the 2 nuts on the back of it. There will be flimsy metal tabs on the back that will probably break but be careful with them. YOu can then just take out the plastic piece. I used engine enamel cause thats what i had and it stuck to it just fine.

70short · 11-22-2003, 11:45 PM

On my 70 I removed it from the hood. I will replace the grill with one that does not say chevrolet. I will also put on A smooth tail gate on. If they dont know what the truck is by now OH WELL!!!

11-23-2003, 02:39 AM

like I said, Krylon

**72afr** · 11-24-2003, 01:31 AM

Thanks a lot for the replies

gr8scott51 · 11-24-2003, 02:00 AM

Painted mine to match the truck - YELLOW. On my 68 it's held on with 2 nuts. Scrubbed it and used a brush. I like it. Hope yours turns out okay. Scott

11-20-2003, 01:50 AM	#1
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 280	Front Bowtie Does anyone know how to change the color of the bowtie on the grille (blue looks good and all, but red would look better) __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

11-22-2003, 11:45 PM	#4
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	On my 70 I removed it from the hood. I will replace the grill with one that does not say chevrolet. I will also put on A smooth tail gate on. If they dont know what the truck is by now OH WELL!!! __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

11-24-2003, 01:31 AM	#6
72afr Beep! Beep! Join Date: Nov 2003 Location: Rural, MO Posts: 280	Thanks a lot for the replies __________________ 1972 Chevrolet C/10 shortbed, stepside, 350, HEI, Fire Engine Red, Black Interior, Former Army cargo transport 2003 Chevrolet 2500HD CC 6.0 4wd 2004 Jeep Rubicon some aftermarket stuff... 2019 Jeep Unlimited Rubicon (the wife's baby hauler)

11-24-2003, 02:00 AM	#7
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	color match Painted mine to match the truck - YELLOW. On my 68 it's held on with 2 nuts. Scrubbed it and used a brush. I like it. Hope yours turns out okay. Scott __________________ Silence is golden, duct tape is silver. - Scott

11-22-2003, 11:38 PM	#3
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	I painted mine grabber green. Just remove the 2 nuts on the back of it. There will be flimsy metal tabs on the back that will probably break but be careful with them. YOu can then just take out the plastic piece. I used engine enamel cause thats what i had and it stuck to it just fine.

11-23-2003, 02:39 AM	#5
REDWHITE402 Guest Posts: n/a	like I said, Krylon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.