Does this z-bar, bellcrank look serviceable? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 11-25-2003, 11:16 PM

By all means, do your self a favor and get #12 from your local GM House. When I first got my 71 4x4 the clutch Z-bar kept "jumping" out of the frame side bracket. Put it back in, align and tighten everthing and before long it would pop out again. After doing some research found out about #12 (retaining clip). VERY useful item. Got one, put it in, no more problem ! I have a spare or two just to be on the safe side. Not very expensive but very useful.

11-25-2003, 11:16 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,188	By all means, do your self a favor and get #12 from your local GM House. When I first got my 71 4x4 the clutch Z-bar kept "jumping" out of the frame side bracket. Put it back in, align and tighten everthing and before long it would pop out again. After doing some research found out about #12 (retaining clip). VERY useful item. Got one, put it in, no more problem ! I have a spare or two just to be on the safe side. Not very expensive but very useful. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.