Transmission mount help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

B63Zombie · 06-19-2013, 02:35 AM

I have a 63 C10 that is going to be running a portebuilt dropmember. I am running a 250 with a 4 speed manual transmission. Since it has the bellhousing mount instead of the mount at the end of the transmission I dont know the best option for monting. Dont now if i need to have a custom mount made since my motor is being moved alot or if there is something i can do myslef. Would love to be able to install it all myslef, but if i need to make a new bellhousing mount then my skils arent quite there yet.

Thanks for the help.

**Captainfab** · 06-20-2013, 11:49 PM

What do you mean by "since my motor is being moved alot" ? Can't you just leave the bellhousing on the original crossmember and build your motor mounts from the dropmember to the engine, which will be in the original location? With the engine and trans you are using, that would seem to be the easiest to me.

B63Zombie · 06-22-2013, 09:55 PM

The motor has to get raised up to clear the rack and pinion as well as the transmission to get it above the frame rails. Did some looking last night should be able to just modify the original trans cross member .

06-19-2013, 02:35 AM	#1
B63Zombie Registered User Join Date: Apr 2013 Location: Riverside,Ca Posts: 10	Transmission mount help I have a 63 C10 that is going to be running a portebuilt dropmember. I am running a 250 with a 4 speed manual transmission. Since it has the bellhousing mount instead of the mount at the end of the transmission I dont know the best option for monting. Dont now if i need to have a custom mount made since my motor is being moved alot or if there is something i can do myslef. Would love to be able to install it all myslef, but if i need to make a new bellhousing mount then my skils arent quite there yet. Thanks for the help.

06-20-2013, 11:49 PM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Transmission mount help What do you mean by "since my motor is being moved alot" ? Can't you just leave the bellhousing on the original crossmember and build your motor mounts from the dropmember to the engine, which will be in the original location? With the engine and trans you are using, that would seem to be the easiest to me. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-22-2013, 09:55 PM	#3
B63Zombie Registered User Join Date: Apr 2013 Location: Riverside,Ca Posts: 10	Re: Transmission mount help The motor has to get raised up to clear the rack and pinion as well as the transmission to get it above the frame rails. Did some looking last night should be able to just modify the original trans cross member .



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.