AD interior windshield trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedneckRodder · 06-23-2013, 07:26 PM

Talked to a guy at the local Rod shop yesterday, he says nobody remakes the AD interior windshield trim. Is this true? Is there no company out there reproducing this piece? My searches haven't turned up anything, but maybe I'm not using the right vocabulary.......?

Ryan
Posted via Mobile Device

crossfire84 · 06-23-2013, 07:39 PM

you are correct, i'm in the same boat.

RedneckRodder · 06-23-2013, 07:56 PM

Well, looks like the search is on for a usable original then! I don't mind the look of it with no trim, but I fear my defrost vents might dry my contacts out before the windshield clears up!
Posted via Mobile Device

f18delta · 06-24-2013, 02:54 PM

I might be a little crazy, but why not use some old (or new if you'd rather) vents? Cut them about an inch down from where they mount under the dash and perch them on top aimed towards the windows? Should help fix your dried contacts. And no, I don't have the interior trim either.

RedneckRodder · 06-24-2013, 03:03 PM

Quote:

Originally Posted by f18delta

I might be a little crazy, but why not use some old (or new if you'd rather) vents? Cut them about an inch down from where they mount under the dash and perch them on top aimed towards the windows? Should help fix your dried contacts. And no, I don't have the interior trim either.

I like the look of the original trim in there, and to tell you the truck, I'm sick of modifying things to work! Lol. Shouldnt be too hard to find the trim, so I think I'll go that route.
Posted via Mobile Device

**Dan in Pasadena** · 06-24-2013, 04:13 PM

Quote:

Originally Posted by RedneckRodder

....I'm sick of modifying things to work!...

HERESY! HERESEY! Burn him! Burn him!

Zach B · 06-24-2013, 04:47 PM

Yeah I got luckey on mine especially. The best rout to go is find an old cab with a decent interior and restore the trim. My interior was all in my truck but I don't have an engine runing or a bed. My cab needs some work to.
Posted via Mobile Device

RedneckRodder · 06-24-2013, 08:20 PM

Quote:

Originally Posted by Dan in Pasadena

HERESY! HERESEY! Burn him! Burn him!

Geez Dan! Throw me under the bus why dontcha! Lol. I thought this damn thing was paint by number!
Posted via Mobile Device

54 jimmy · 06-26-2013, 11:27 AM

here is a complete set on ebay. $75.00. here is the item #130901710759. hope this helps.

mr48chev · 06-26-2013, 12:39 PM

Following the radio delete plate I think the window trim is the second thing that is missing out of most cabs you find sitting around.

Zach B · 06-26-2013, 05:30 PM

I'm in a similar situation on the cab molding that goes around the door. It's not the floating type like the late 49-55. My mettal striping broke on the drivers side and has rusted out on one portion. I'm thinking about trying to reproduce them myself. In the latter years you could only see rubber on mine you can see a mettal stio that went over the robber.
Posted via Mobile Device

RedneckRodder · 06-26-2013, 05:38 PM

Quote:

Originally Posted by Zach B

I'm in a similar situation on the cab molding that goes around the door. It's not the floating type like the late 49-55. My mettal striping broke on the drivers side and has rusted out on one portion. I'm thinking about trying to reproduce them myself. In the latter years you could only see rubber on mine you can see a mettal stio that went over the robber.
Posted via Mobile Device

I assume you must be talking about the wind lace channels. Those are available, but overpriced in my opinion. If you can use what's there and make the rusted portions yourself you'll be a lot better off cash wise.
Posted via Mobile Device

Zach B · 06-26-2013, 05:48 PM

That actualy would not be a bad idea. All the windlace channels I have seen are for the 49-55 but I my even be able to find a portion of it off another truck and stick them together. Mine are bent very badly but I can straiten them out.
Posted via Mobile Device

06-23-2013, 07:39 PM	#2
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: AD interior windshield trim you are correct, i'm in the same boat. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

06-23-2013, 07:56 PM	#3
RedneckRodder Registered User Join Date: Mar 2013 Location: Silvana, WA Posts: 181	Re: AD interior windshield trim Well, looks like the search is on for a usable original then! I don't mind the look of it with no trim, but I fear my defrost vents might dry my contacts out before the windshield clears up! Posted via Mobile Device

06-24-2013, 02:54 PM	#4
f18delta Registered User Join Date: Sep 2012 Location: OKC, OK Posts: 82	Re: AD interior windshield trim I might be a little crazy, but why not use some old (or new if you'd rather) vents? Cut them about an inch down from where they mount under the dash and perch them on top aimed towards the windows? Should help fix your dried contacts. And no, I don't have the interior trim either. __________________ 1952 Chevy 3600 - Sancha

06-24-2013, 04:47 PM	#7
Zach B Registered User Join Date: Jun 2013 Location: El Dorado Springs Missouri Posts: 246	Re: AD interior windshield trim Yeah I got luckey on mine especially. The best rout to go is find an old cab with a decent interior and restore the trim. My interior was all in my truck but I don't have an engine runing or a bed. My cab needs some work to. Posted via Mobile Device

06-26-2013, 11:27 AM	#9
54 jimmy Registered User Join Date: Oct 2007 Location: pittston,PA Posts: 1,183	Re: AD interior windshield trim here is a complete set on ebay. $75.00. here is the item #130901710759. hope this helps. __________________ There is nothing you can't fix with a BFH or a FIRE WRENCH. 1997 chevy k1500 ext cab z71 (daily driver) sold 1996 chevy k1500 reg cab 4x4(daily driver)totaled 2008jeep patriot (wife's daily driver 2008 chevy 1500 ext cab 4x4 sold 2011 chevy 1500 crew cab ltz (daily driver) 1996 chevy 1500 reg cab 4x4 project sold 2006 pontiac grand prix gxp (daily work commuter)

06-23-2013, 07:26 PM	#1
RedneckRodder Registered User Join Date: Mar 2013 Location: Silvana, WA Posts: 181	AD interior windshield trim Talked to a guy at the local Rod shop yesterday, he says nobody remakes the AD interior windshield trim. Is this true? Is there no company out there reproducing this piece? My searches haven't turned up anything, but maybe I'm not using the right vocabulary.......? Ryan Posted via Mobile Device

06-26-2013, 12:39 PM	#10
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,413	Re: AD interior windshield trim Following the radio delete plate I think the window trim is the second thing that is missing out of most cabs you find sitting around. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-26-2013, 05:30 PM	#11
Zach B Registered User Join Date: Jun 2013 Location: El Dorado Springs Missouri Posts: 246	Re: AD interior windshield trim I'm in a similar situation on the cab molding that goes around the door. It's not the floating type like the late 49-55. My mettal striping broke on the drivers side and has rusted out on one portion. I'm thinking about trying to reproduce them myself. In the latter years you could only see rubber on mine you can see a mettal stio that went over the robber. Posted via Mobile Device

06-26-2013, 05:48 PM	#13
Zach B Registered User Join Date: Jun 2013 Location: El Dorado Springs Missouri Posts: 246	Re: AD interior windshield trim That actualy would not be a bad idea. All the windlace channels I have seen are for the 49-55 but I my even be able to find a portion of it off another truck and stick them together. Mine are bent very badly but I can straiten them out. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.