Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-24-2013, 10:50 AM | #26 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: a few questions regarding vin/reg
The wheel and horn cap (pending condition) are also valuable and I've seen auto columns sell for 150 by themselves. The grill looks nice and also could be worth a couple hundred or more if as nice as it looks in the pics.
Again, good deal just for the parts but NOT a truck to build.
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
06-24-2013, 10:53 AM | #27 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: a few questions regarding vin/reg
Not trying to be rude, but you need to stop worrying about where the vins are on this and part it out...use what you want....and move on to another. There is a vin on the upper frame rail as mentioned...on my 67 it's near where the steering gear is but I've heard of it being further back on later models where you have to use a mirror to find it.
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
06-24-2013, 10:54 AM | #28 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: a few questions regarding vin/reg
Also, A/C parts can be valuable (controller, vents on the side of the dash, and of course anything under the hood)
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
06-24-2013, 10:57 AM | #29 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: a few questions regarding vin/reg
Don't call an inspector...you could have to pay the fees no matter what. Don't pursue titling this any more. It's a complete waste of time and money.
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
06-24-2013, 02:44 PM | #30 |
Registered User
Join Date: May 2008
Location: Woodlawn, TN
Posts: 275
|
Re: a few questions regarding vin/reg
Looks like the cab itself is junk anyways but everything else is good. I'd say keep everything but the cab and throw a new cab on her. I don't think it'll be hard to replace the cab and then you will have one that is legit. For 375, I'd say you did alright, you just have some work to do. I did something similar years ago with mine where I had to swap out the chassis but had a good cab. You have the opposite. It's workable.
__________________
Rocinante: 1972 GMC C25, 292, SM465, 14 bolt, power nothing, 440k and still handles my PCS moves Jorge: Kia Roller-skate with lots of buttons for the wife Wovoka: 2017 Indian Chief Vintage, better on gas but not much So far, this is the oldest I've ever been. |
06-26-2013, 06:59 PM | #31 |
graphic designer
Join Date: May 2004
Location: Spokane, Washington
Posts: 841
|
Re: a few questions regarding vin/reg
looks like it's running serpentine belts and has a new style PS pump. i'd be skeptical that the engine is original, unless someone went through the hassle of putting all new accessories on the front of a 307. you got a parts truck. now go buy one with a title and VIN
|
Bookmarks |
Tags |
1968, gmc, reg, vin |
|
|