Quote:
Originally Posted by OrrieG
All I have is TF reference stuff and could not find a bolt layout on line. But regardless of what you have the boards with the recessed holes go directly over the frame thru the cross sills. GMC Pauls has a board layout chart. Since the holes are obviously offset in the board to one side, using the layout for width and knowing the bed is centered over the frame, you should be able to get the location close to see if what you ordered is right. I am surprised that you did not get a layout diagram with the kit.
|
Thanks!
The bed is centered and the current holes line up and are currently bolted to the frame. It all looks right. I also searched online for images/layouts without clear success and all the kit came with were written directions (no images or diagrams). There is no way the kit would tie into the frame as all the holes would be offset inward far too much.
I suspect that the kit is for a TF bed but I'm not certain.
Thanks again!
Posted via Mobile Device