TX Parting out another 72 LWB and other parts

[tlcrz1972]

Well it's time, I need to minimize the herd a little bit. So when I get my shop built I don't have to haul so much stuff with me.

So this truck is a 1972 Custom 10, It had a slight rollover with the previous owner, I bought it for some parts, motor tranny and misc. Now it's time for it to dissapear.

In the bed there is a 71-72 upper/lower a-frames with knucles/disks and other misc parts an sm465 out of a 72 GMC longbed, extra trailing arms.

PLus I have more parts in my storage bus. If you don't see something ask, I might have it and I might sell it.

Look at the pictures if you se something your interested in let me know and I'll price it, and I usually go first one to call it gets first dibbs at it. And second call get's a chance if the first one declines to buy it etc.

I don't mind cutting out good panels that can be good patch panels.

All shipping is extra, and I would like to have several orders made before I go to the post office or other shipping service to get quotes on shipping. So I might not get it shipped for a couple of days.

And larger parts can be shipped, but shipping them is a pain, and making boxes or crates do cost. So picking up the larger stuff is always preferred.

Plus keep all inquiries on the thread. And we will PM after the deal is made.


And on paypal payments above $30.00 there will be a 3% add on for their take of the transaction.
Money orders and cash are good alternatives as well.





Attention everyone:

Please keep all inquiries on this thread, it helps me keep up with everyones wants and needs. So I don't miss your request.

Thanks

[tlcrz1972]

more pictures

Plus the longhorn in the background which I have had in a earlier thread, there is still parts for sale off of it.

[tlcrz1972]

even more pictures

[twouvakind]

Either one have working dual(high/low note)horns?

[chevyguy_72]

if you are cutting up the frame I need both front rails from the back of the rad support forward

[tlcrz1972]

Well it does have one horn, and I pulled it off and jumped voltage to it, and it blew pretty nice. But I tried leaving it on the voltage (like I was hacked off at the driver in front of me) and it started to fall off on sound and went into a dull honk/buzzing. And now it's intermittent.

Originally Posted by twouvakind

Either one have working dual(high/low note)horns?

[tlcrz1972]

That I will have to think about, it's a real good frame with a title. It could be a good base for a future truck project with a bad frame.

Too bad for both of us I just cut up and hauled off three frames to the recycler last December that would have been perfect donors.

I'll keep you in mind on this.

Thanks

Originally Posted by chevyguy_72

if you are cutting up the frame I need both front rails from the back of the rad support forward

[69Rumbler]

I need a review mirror for an 69
Posted via Mobile Device

[nightmare]

I'm looking for the lower trim clips for the pieces behind the doors on the cab. How much for those, shipped to 77084, and can you take pictures of the clips still on the trim? Thanks.
Posted via Mobile Device

[twouvakind]

Thanks for checking, I'll pass on that "note"

Originally Posted by tlcrz1972

Well it does have one horn, and I pulled it off and jumped voltage to it, and it blew pretty nice. But I tried leaving it on the voltage (like I was hacked off at the driver in front of me) and it started to fall off on sound and went into a dull honk/buzzing. And now it's intermittent.

[wylieguy]

do you have a swb frame ?

[mo]

I need 1/2 front spindles (5 lug) price to 93013
Thanks
Posted via Mobile Device

[blfuller123]

Price picked up for the grill and front bumper with brackets?

[JayDubBlazer]

Price for door panels please
Posted via Mobile Device

[TOMMY70C10]

The area where the upper weather strip goes above the doors. On the inside of the cab, need about 2-3 inches on the inside of the cab. Is it good and what would is take to get them? Shipped to 65655 thanks

[Flint70step]

Pics of the SPID,I am interested in the fenders and hood.Thanks

[beetle1960]

have an interest in the vacuum power brake unit

[chevyguy_72]

Originally Posted by tlcrz1972

That I will have to think about, it's a real good frame with a title. It could be a good base for a future truck project with a bad frame.

Too bad for both of us I just cut up and hauled off three frames to the recycler last December that would have been perfect donors.

I'll keep you in mind on this.

Thanks

Thanks

[tlcrz1972]

Sorry, I don't have one.

Originally Posted by 69Rumbler

I need a review mirror for an 69
Posted via Mobile Device

[CaptRMW]

Price and condition of cargo lamp shipped to 21401 Thanks Roger

[tlcrz1972]

No I don't I do have a complete, finished & driving SB for sale.

Originally Posted by wylieguy

do you have a swb frame ?

[tlcrz1972]

I will bet the prake booster is most likely dead, it's been exposed to the environment for a long while now.

Are you looking for a core for rebuild, with the brackets.

Originally Posted by beetle1960

have an interest in the vacuum power brake unit

[tlcrz1972]

I can get you those for $11.00 shipped


Here is a picture of one side

Originally Posted by nightmare

I'm looking for the lower trim clips for the pieces behind the doors on the cab. How much for those, shipped to 77084, and can you take pictures of the clips still on the trim? Thanks.
Posted via Mobile Device

[wylieguy]

I just am looking for a bare frame.

[tlcrz1972]

Are you looking for the grill shell and insert?

Originally Posted by blfuller123

Price picked up for the grill and front bumper with brackets?