wheel opinions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JointTech · 07-03-2013, 09:55 PM

Just wondering which ones you like best. They are going on a stock height C20 with nitto or toyo M/T 31"-33". My tire guy is working up what will fit and best prices.
any thoughts of one brand better or worse than another?
This truck will most likely never go offroad. I doubt it ever tows anything but a home depot rental trailer. Its not going to haul more than a washer and dryer or refrigerator.
Its just a toy and to go to home depot.

Im leaning towards the dropstars but the AE are growing on me more. I like the deep lip on the Drop stars.
They all cost about the same. in 20x9

dropstar

Fuel

American Eagle

Tire options
open country 275/55R20 - 32 x 10.83r20

nitto terra grappler
285/50R20 31x11.22r20
265/50R20 30x10.43r20
275/55/R20 32x10.83r20

jhwkns · 07-03-2013, 10:39 PM

None of the above. I don't care for phony beadlocks.

JointTech · 07-03-2013, 10:44 PM

oh are those rivet things supposed to be beadlocks? lol I didnt even think of that. I guess they are kind of poser then. I thought it was just decoration or something. Well damn.

Its hard to find matte/machined that arent 5 stars or have a bunch of circles in them.

BlackedOut67shorty · 07-03-2013, 10:47 PM

I think the dropstars look pretty good but I would see that wheel on a four wheel drive more than a two wheel but heck I don't think it look half bad.
Posted via badass Mobile Device

ksbrktracer · 07-03-2013, 10:48 PM

American Eagle ..... First off I sell them , Secondly Ive seen them in person , fantastic looking finish and great looking wheel.

JointTech · 07-03-2013, 10:49 PM

hey and a board vendor too. pm me if you have a package price. you can see what im looking for.

SS Tim · 07-03-2013, 10:51 PM

What are they going to look like without a center cap or opened up enough to clear your rear axle hubs?

ksbrktracer · 07-03-2013, 10:52 PM

It would be friday the soonest I could get a price , I dont have any of those in stock right now, but Im pretty sure my warehouse said they just got some.

jhwkns · 07-03-2013, 10:53 PM

Quote:

Originally Posted by JointTech

oh are those rivet things supposed to be beadlocks? lol I didnt even think of that. I guess they are kind of poser then. I thought it was just decoration or something. Well damn.

Its hard to find matte/machined that arent 5 stars or have a bunch of circles in them.

lol, sorry if I busted your bubble. That's what they are. I've always felt that those, or faked modular wheels aren't anything I'd want.

JointTech · 07-03-2013, 11:11 PM

Honestly I hate the center caps on all of them. I dont like advertising unless Im getting paid for it. I was planning on rattlecanning the centercaps at the very least. If I cant pull the logos off. So I think theyll look fine with no center caps.
I didnt even think of that though. Now that I do it will look baddass with the 8bolts for the axle showing.

STOCKISH · 07-04-2013, 09:22 AM

Quote:

Originally Posted by SS Tim

What are they going to look like without a center cap or opened up enough to clear your rear axle hubs?

That was going to be my question as well.

JointTech · 08-08-2013, 09:24 PM

Quote:

Originally Posted by 1972SuperCheyenne

That was going to be my question as well.

the answer is they look ##$%^ing sick!!

the caps actually do fit but I like it raw.

Badger7C9F · 08-09-2013, 05:07 AM

Dude, they look NICE!!!!!
Posted via Mobile Device

View Poll Results: which ones??
Dropstar 645B	4	44.44%
Fuel D534	3	33.33%
American Eagle 018	2	22.22%
Voters: 9. You may not vote on this poll

07-03-2013, 09:55 PM	#1
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	wheel opinions Just wondering which ones you like best. They are going on a stock height C20 with nitto or toyo M/T 31"-33". My tire guy is working up what will fit and best prices. any thoughts of one brand better or worse than another? This truck will most likely never go offroad. I doubt it ever tows anything but a home depot rental trailer. Its not going to haul more than a washer and dryer or refrigerator. Its just a toy and to go to home depot. Im leaning towards the dropstars but the AE are growing on me more. I like the deep lip on the Drop stars. They all cost about the same. in 20x9 dropstar Fuel American Eagle Tire options open country 275/55R20 - 32 x 10.83r20 nitto terra grappler 285/50R20 31x11.22r20 265/50R20 30x10.43r20 275/55/R20 32x10.83r20 __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread Last edited by JointTech; 07-03-2013 at 10:02 PM.

07-03-2013, 10:39 PM	#2
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: wheel opinions None of the above. I don't care for phony beadlocks. __________________ I intend to live forever. So far, so good.

07-03-2013, 10:44 PM	#3
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: wheel opinions oh are those rivet things supposed to be beadlocks? lol I didnt even think of that. I guess they are kind of poser then. I thought it was just decoration or something. Well damn. Its hard to find matte/machined that arent 5 stars or have a bunch of circles in them. __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

07-03-2013, 10:47 PM	#4
BlackedOut67shorty Registered User Join Date: Aug 2012 Location: error 404 location not found Posts: 816	Re: wheel opinions I think the dropstars look pretty good but I would see that wheel on a four wheel drive more than a two wheel but heck I don't think it look half bad. Posted via badass Mobile Device __________________ 1995 s10 blazer 4.3 1967 c10 350/350 fleet short 1993 s10 blazer 4.3l 4l60 RIP 6/20/14 2000 mercury sable Thats a how I roll

07-03-2013, 10:48 PM	#5
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: wheel opinions American Eagle ..... First off I sell them , Secondly Ive seen them in person , fantastic looking finish and great looking wheel.

07-03-2013, 10:49 PM	#6
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: wheel opinions hey and a board vendor too. pm me if you have a package price. you can see what im looking for. __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

07-03-2013, 10:51 PM	#7
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: wheel opinions What are they going to look like without a center cap or opened up enough to clear your rear axle hubs? __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

07-03-2013, 10:52 PM	#8
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: wheel opinions It would be friday the soonest I could get a price , I dont have any of those in stock right now, but Im pretty sure my warehouse said they just got some.

07-03-2013, 11:11 PM	#10
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: wheel opinions Honestly I hate the center caps on all of them. I dont like advertising unless Im getting paid for it. I was planning on rattlecanning the centercaps at the very least. If I cant pull the logos off. So I think theyll look fine with no center caps. I didnt even think of that though. Now that I do it will look baddass with the 8bolts for the axle showing. __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

08-09-2013, 05:07 AM	#13
Badger7C9F Registered User Join Date: Jul 2013 Location: Manchester, United Kingdom Posts: 31	Re: wheel opinions Dude, they look NICE!!!!! Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.