The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-18-2013, 04:42 PM   #1
jesse2135
Registered User
 
jesse2135's Avatar
 
Join Date: Apr 2013
Location: San Antonio, Texas
Posts: 9
1957 Chevy 3100 Cluster Gauge Wiring

Hey guys i am finally wrapping up the harness install on my truck. Only thing is i got to the gauge hookup part and realized i cannot read or find terminal nomenclature for the ammeter or the fuel gauge. The ammeter has the terminals 2 with 2 male terminals on each side but i do not know which side is negative or positive to hookup the harness to. Also on the fuel gauge i do not know which post goes to what there are no labels. I know what each wire is for since i have the wiring diagram but i do not know what the terminal is. Any help would be greatly appreciated. Thanks guys!
jesse2135 is offline   Reply With Quote
Old 09-18-2013, 09:05 PM   #2
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: 1957 Chevy 3100 Cluster Gauge Wiring

hook both up any way you want, if they read backwards they are wired wrong. no harm to your gauges.
the ampmeter should have + - stamped on them. so should the gas gauge - goes to the sending unit
you can also test the gas gauge by putting 12v to one side and ground the other
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 09-18-2013, 10:15 PM   #3
jesse2135
Registered User
 
jesse2135's Avatar
 
Join Date: Apr 2013
Location: San Antonio, Texas
Posts: 9
Re: 1957 Chevy 3100 Cluster Gauge Wiring

Ok ill try that tomorrow I think I got the ammeter good but I need to check the fuel because the needle didn't move on it when I turned the key on. Wasnt able to keep her running due to a cracked fuel line fitting. Is the gas tank just one terminal to the IGN switch and the other to the sending unit? Does the tank need to be grounded? Thanks for the help!
Posted via Mobile Device
jesse2135 is offline   Reply With Quote
Reply

Bookmarks

Tags
1957, ammeter, cluster, fuel, wiring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com