Cut Off Wheels 2", 3", 4", 4½", 5", 6", 10 ", 12" & 14"

[Abrasive Trader]

This will be our Cut Off Wheel Thread that we will be adding to and updating.

Right now, we have a good selection and it will get better. In about 2 weeks we will have stock on USA Made Cut Off Wheels.

For now, here are some links for everyone.

If you are a shop that buys in bulk, please email or PM and we'll get a quantity discount for you. Depending on size & thickness, these wheels come in boxes of 25, 50, or 100 pieces, but on the site you can buy them in singles to test us out.


2" Cut Off Wheels

3" Cut Off Wheels

4½" Cut Off Wheels

5" Cut Offs

[Abrasive Trader]

We Added Made In USA Cut Off Wheels in 3" 4.5" and 6". They are located in the top of our lists

2" Cut Off Wheels

3" Cut Off Wheels - Made In USA

4½" Cut Off Wheels - Made In USA

5" Cut Offs

6" Cut Off Wheels - Made In USA

[Abrasive Trader]

We changed some things around in the cut off wheel section. The 4.5" x .040" are the best value and they will cut stainless steel. We had this wheel about 2yrs ago, ran out, and people ask us every week if we still have any left. Well now they are back! If you need wheels, give those a try....

[Abrasive Trader]

We have a lot of the USA wheels going out. We also just recieved a pile of stainless steel USA Made Cut off wheels. Wheel get the lists updated ASAP!

[Abrasive Trader]

All the cut off wheel lists are up to date and In-Stock!

Thanks for the Orders!

[Abrasive Trader]

Don't forget that 10% Discount Code::: CHEVY

[Abrasive Trader]

Still Spinning Wheels!

[Abrasive Trader]

We have been running longevity tests on several of the cut off wheels. We'll post up results when its finished!

[JointTech]

so when are you going to invent a guaranteed not to blow up and send shrapnel into your face cutoff wheel for those of us that are chickens and scared of sparks?
looking forward to the tests.

[Abrasive Trader]

Haha Jointtech, I am actually glad you brought this up, wheels coming apart is a big concern for anyone using them and especially for a guy like me, selling them to lots of people. I dont know any manufacturers that will completely guarantee them not breaking though! Someone could step on your grinder, break the wheel, you pickup the grinder to use it and even the best wheel could still fly apart if its cracked or fractured.

But I have used a lot of wheels, cheap and higher quality. I can tell you that the better brand wheels or made in usa wheels are far better and safer across the board. Even when you bind them up or twist them, they still don't flake apart like the cheap ones.

As far as being scared of sparks I don't know what to tell you.

[Cape Codder]

I have been doing body work and using cutoff wheels for years and have never had one come apart. I don't put them on the floor as that's when they get broken.

[Abrasive Trader]

Originally Posted by Cape Codder

I have been doing body work and using cutoff wheels for years and have never had one come apart. I don't put them on the floor as that's when they get broken.

Exactly, laying them on the floor is probly the #1 killer for cut offs. They can fracture or get stressed and they wont look any different but the glue and strands are weakened.

[Abrasive Trader]

Thanks for the orders.

[Abrasive Trader]

We lowered prices again and have some Closeouts...3" & 4.5"

Check them out!
http://www.roarksupply.com/Cut-Off-Wheels-s/340.htm

[Abrasive Trader]

We still have some closeouts left!

[Abrasive Trader]

Closeouts and USA are rolling out. Thanks for the orders.

[LEX]

Has my order been shipped?

[Abrasive Trader]

Yes, we had a couple delays from moving. Everything was out by monday.

[Abrasive Trader]

Keep the orders rolling guys, we appreciate it!

[crossfire84]

thanks for the fast shipping and the 2 extra cut off wheels.

[Abrasive Trader]

Originally Posted by crossfire84

thanks for the fast shipping and the 2 extra cut off wheels.

No problem, thanks for the order! We try to throw in an extra cut off wheel from another brand so customers can compare quality from one wheel to another....its hard to tell when you're picking from a list on your computer