Intake & Carb Install - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

izzy_Britton · 10-26-2013, 01:29 AM

choke is NOT necessary. makes for easier starts but not needed. I was a lazy bastard and left my choke disconnected. pump the pedal twice and fire.

its been getting cooler here at night so i will probably hook up the choke this weekend or next.

-Izzy

77ChevySharkBite · 10-26-2013, 05:46 PM

I can't say thank you enough fellas you have been so helpful the truck is alive and it's nasty power, I scared myself a little but it's up and running just have to fine tune it now!!

79Betty · 10-26-2013, 07:36 PM

Glad to hear it's good. I'ma eventually gonna do intake and holley 600 but i gotta get new driveshafts first. Will use this as a refrence

77ChevySharkBite · 10-26-2013, 09:00 PM

Quote:

Originally Posted by 79Betty

Glad to hear it's good. I'ma eventually gonna do intake and holley 600 but i gotta get new driveshafts first. Will use this as a refrence

Cool man glad you'll be able to use it. I will say a few things though on you to get list is new thermostat and housing, shorter throttle cable also I would say get a throttle cable bracket and double and triple check your hose clamps and and all bolts. Other than just be patient and take your time make sure your gaskets are sealed on both sides for everything and use what's called rtv silicone gasket sealant it's blue other than what's listed I didn't buy much of anything. Hope it helps out more man, it was frustrating at times but now that it's running totally worth it!

10-26-2013, 01:29 AM	#1
izzy_Britton Registered User Join Date: Apr 2013 Location: Nor-Cal Posts: 632	Re: Intake & Carb Install choke is NOT necessary. makes for easier starts but not needed. I was a lazy bastard and left my choke disconnected. pump the pedal twice and fire. its been getting cooler here at night so i will probably hook up the choke this weekend or next. -Izzy __________________ WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too Cream Puff - LS'd Square - Slow going on the back burner Tripple Threat - 3 Wrecks for the price of one build thread Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.

10-26-2013, 05:46 PM	#2
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: Intake & Carb Install I can't say thank you enough fellas you have been so helpful the truck is alive and it's nasty power, I scared myself a little but it's up and running just have to fine tune it now!! __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

10-26-2013, 07:36 PM	#3
79Betty Registered User Join Date: Jan 2013 Location: Jasper, IN Posts: 948	Re: Intake & Carb Install Glad to hear it's good. I'ma eventually gonna do intake and holley 600 but i gotta get new driveshafts first. Will use this as a refrence __________________ When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.