TX WTB SBC manifold heat stove for curved outlet manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 10-08-2013, 10:17 PM

WTB SBC manifold heat stove for curved outlet manifold. I had one that got stolen out of the mailbox back during tax time by thieves looking for W2's. i bought another but it is for straight outlet manifolds. I will trade it for a curved outlet stove. Will post new ad for straight stove as soon as I dig it out of storage. I dont need rhe riser tube

JimH2828 · 10-08-2013, 10:28 PM

Wideside72, maybe we can get this done with three of us members. I am interested in your 4x4 straight down heat stove parts. A few weeks back I was over at forum member uncle place and he had the 4x2 angled heat stove but I didn't buy it. Send him a note, I'll also let him know you are going to inquire.

Please send pics and price of the straight heat stove parts.

Thanks
JimH2828

billsbowtie · 10-08-2013, 11:30 PM

WIDESIDE72 if you don't find 1 i think i have what you are lookin for. do you just need the pipe or do you need the piece that goes on the manifold also?

**WIDESIDE72** · 10-08-2013, 11:52 PM

Quote:

Originally Posted by billsbowtie

WIDESIDE72 if you don't find 1 i think i have what you are lookin for. do you just need the pipe or do you need the piece that goes on the manifold also?

I just need the part on the manifold. I already have the tube that goes to the air cleaner.

**WIDESIDE72** · 10-08-2013, 11:53 PM

Quote:

Originally Posted by JimH2828

Wideside72, maybe we can get this done with three of us members. I am interested in your 4x4 straight down heat stove parts. A few weeks back I was over at forum member uncle place and he had the 4x2 angled heat stove but I didn't buy it. Send him a note, I'll also let him know you are going to inquire.

Please send pics and price of the straight heat stove parts.

Thanks
JimH2828

Will do

billsbowtie · 10-11-2013, 11:48 PM

WIDESIDE72 i have this whole setup for $35.00 shipped .
i will give you 1st shot at it before i post it on the parts board.
it is good drver shape.

billsbowtie · 10-11-2013, 11:51 PM

**WIDESIDE72** · 10-12-2013, 01:59 AM

I will take it. Pm me your payment info

**WIDESIDE72** · 10-12-2013, 02:03 AM

I dug the stove i had out of storage and it is actually for a curved manifold. The issue is the backer plate (for lack of a better term) goes behind the manifold using all six (!) manifold bolts. I knew there was some reason I wasnt going to use it! i dont want to have to remove the manifold in order to install it,since I now have the full exhaust installed on the truck. Does anyone know if this is an early design or what the deal is?

**WIDESIDE72** · 10-12-2013, 02:04 AM

I will post photos later.

JimH2828 · 10-12-2013, 07:32 AM

Well, not sure where this one is going. Bill, I'll take the 4x4 straight down stove and pipe if Wideside72 can't use it.

Thanks
Jim

**Oddfire** · 10-12-2013, 09:08 AM

Just a heads up to all members: The straight heat stove will fit the 45* manifold cause that's what i'm using on mine. I had a curved one but it lacked the holes for the big bumps between the two center bolts. So the straight will fit either manifold. Jamie 71

Longhorn

**WIDESIDE72** · 10-12-2013, 09:35 AM

Quote:

Originally Posted by JimH2828

Well, not sure where this one is going. Bill, I'll take the 4x4 straight down stove and pipe if Wideside72 can't use it.

Thanks
Jim

I dug the stove i had out of storage and it is actually for a curved manifold. The issue is the backer plate (for lack of a better term) goes behind the manifold using all six (!) manifold bolts. I knew there was some reason I wasnt going to use it! i dont want to have to remove the manifold in order to install it,since I now have the full exhaust installed on the truck. Does anyone know if this is an early design or what the deal is?

JimH2828 · 10-16-2013, 08:48 AM

All the straight and angled stoves I've ever seen mount around the manifold, not through the manifold bolts, so I can't help you. Does it look original? Or is it someone's handy work.

Do you mind it I buy BillsBowtie's stove that he has pictured above?

Thanks
Jim

**WIDESIDE72** · 10-16-2013, 12:29 PM

I have already sent payment for this one as i decided that i didnt want to remove the manifold to install rhe back plate for the one i have

**WIDESIDE72** · 10-17-2013, 10:10 PM

Quote:

Originally Posted by JimH2828

All the straight and angled stoves I've ever seen mount around the manifold, not through the manifold bolts, so I can't help you. Does it look original? Or is it someone's handy work.

Do you mind it I buy BillsBowtie's stove that he has pictured above?

Thanks
Jim

Heres a link to the stove I have. I think I am going to use the backer from Bill's but the stove and riser femine if possible.

http://67-72chevytrucks.com/vboard/s...d.php?t=600630

JimH2828 · 10-17-2013, 10:42 PM

Interesting, shout if you do not need Bill's straight down outer section as I could use it.

Thanks
Jim

10-08-2013, 10:17 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	WTB SBC manifold heat stove for curved outlet manifold WTB SBC manifold heat stove for curved outlet manifold. I had one that got stolen out of the mailbox back during tax time by thieves looking for W2's. i bought another but it is for straight outlet manifolds. I will trade it for a curved outlet stove. Will post new ad for straight stove as soon as I dig it out of storage. I dont need rhe riser tube

10-08-2013, 10:28 PM	#2
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: WTB SBC manifold heat stove for curved outlet manifold Wideside72, maybe we can get this done with three of us members. I am interested in your 4x4 straight down heat stove parts. A few weeks back I was over at forum member uncle place and he had the 4x2 angled heat stove but I didn't buy it. Send him a note, I'll also let him know you are going to inquire. Please send pics and price of the straight heat stove parts. Thanks JimH2828

10-08-2013, 11:30 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB SBC manifold heat stove for curved outlet manifold WIDESIDE72 if you don't find 1 i think i have what you are lookin for. do you just need the pipe or do you need the piece that goes on the manifold also? __________________ i have 67/72 chevy truck parts f/s.

10-11-2013, 11:48 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB SBC manifold heat stove for curved outlet manifold WIDESIDE72 i have this whole setup for $35.00 shipped . i will give you 1st shot at it before i post it on the parts board. it is good drver shape. __________________ i have 67/72 chevy truck parts f/s.

10-11-2013, 11:51 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB SBC manifold heat stove for curved outlet manifold __________________ i have 67/72 chevy truck parts f/s.

10-12-2013, 01:59 AM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB SBC manifold heat stove for curved outlet manifold I will take it. Pm me your payment info

10-12-2013, 02:03 AM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB SBC manifold heat stove for curved outlet manifold I dug the stove i had out of storage and it is actually for a curved manifold. The issue is the backer plate (for lack of a better term) goes behind the manifold using all six (!) manifold bolts. I knew there was some reason I wasnt going to use it! i dont want to have to remove the manifold in order to install it,since I now have the full exhaust installed on the truck. Does anyone know if this is an early design or what the deal is?

10-12-2013, 02:04 AM	#10
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB SBC manifold heat stove for curved outlet manifold I will post photos later.

10-12-2013, 07:32 AM	#11
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: WTB SBC manifold heat stove for curved outlet manifold Well, not sure where this one is going. Bill, I'll take the 4x4 straight down stove and pipe if Wideside72 can't use it. Thanks Jim

10-12-2013, 09:08 AM	#12
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: WTB SBC manifold heat stove for curved outlet manifold Just a heads up to all members: The straight heat stove will fit the 45* manifold cause that's what i'm using on mine. I had a curved one but it lacked the holes for the big bumps between the two center bolts. So the straight will fit either manifold. Jamie 71 Longhorn

10-16-2013, 08:48 AM	#14
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: WTB SBC manifold heat stove for curved outlet manifold All the straight and angled stoves I've ever seen mount around the manifold, not through the manifold bolts, so I can't help you. Does it look original? Or is it someone's handy work. Do you mind it I buy BillsBowtie's stove that he has pictured above? Thanks Jim

10-16-2013, 12:29 PM	#15
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB SBC manifold heat stove for curved outlet manifold I have already sent payment for this one as i decided that i didnt want to remove the manifold to install rhe back plate for the one i have

10-17-2013, 10:42 PM	#17
JimH2828 Registered User Join Date: Oct 2012 Location: Cumming GA Posts: 613	Re: WTB SBC manifold heat stove for curved outlet manifold Interesting, shout if you do not need Bill's straight down outer section as I could use it. Thanks Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.