The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-05-2013, 09:38 PM   #1
Theoriginalsilverado
Registered User
 
Join Date: Nov 2013
Location: Norris Arm NL
Posts: 126
Exclamation Kinked and Bowed Hood

I'm sure if you haven't had it happen to your own square you've at least seen another square with the same problem- a kinked hood. It's a common problem. I was just wondering how you guys fix it.

I've managed to straighten mine out without detaching the hood, and making sure the springs are well greased afterwards- it will do wonders for the hood. But it'll still need straightening after time.

The only alternative I've found other than buying a new one or fixing the one you have is a hood brace kit from LMC, for a cheap $20.


Has anyone used the kit or have any advice pertaining to this topic? Please help me and many other square owners who have bows for a hood.

Check out the kit here:http://www.lmctruck.com/features/cc/cchbk.htm
__________________
If It runs like a Chevy, it probably is!
Theoriginalsilverado is offline   Reply With Quote
Old 11-05-2013, 09:53 PM   #2
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
Re: Kinked and Bowed Hood

There's some other threads on here that goes into it a bit.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 11-05-2013, 10:11 PM   #3
Tx Firefighter
Watch out for your cornhole !
 
Tx Firefighter's Avatar
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
Re: Kinked and Bowed Hood

The hood kinking is actually a safety feature GM designed into the 73-80 trucks.

I usually just spot weld a couple of pieces of flat strap on the bottom side of the hood over the kink points. Its a whole lot cheaper than buying a kit.
Tx Firefighter is offline   Reply With Quote
Old 11-05-2013, 11:25 PM   #4
y5mgisi
Second Chance Program
 
y5mgisi's Avatar
 
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
Re: Kinked and Bowed Hood

I have it on my 78 and it stopped the kinking.
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt.
77 C20 crew cab Silverado. 396/th400. In work.
y5mgisi is offline   Reply With Quote
Old 11-06-2013, 12:40 AM   #5
tucsonjwt
Registered User
 
Join Date: Jul 2007
Location: Tucson, AZ
Posts: 3,188
Re: Kinked and Bowed Hood

I prevented the hood crunch on my 76 by keeping the hinges and big springs lubed - there is a lot of exposed steel there to get rusty even in the desert.
tucsonjwt is offline   Reply With Quote
Old 11-06-2013, 08:30 AM   #6
xrcr
Registered User
 
Join Date: Dec 2008
Location: Foristell, MO
Posts: 418
Re: Kinked and Bowed Hood

I've added plug weld on the sides and steel underneath as well. However keeping it well lubed and when closing, pushing back, then down is a must
xrcr is offline   Reply With Quote
Old 11-06-2013, 11:35 AM   #7
Rnd
Registered User
 
Join Date: Apr 2013
Location: erie Pa
Posts: 34
Re: Kinked and Bowed Hood

I put those LMC braces on my "77 so that the hood wouldn't kink. I wrenched in a Chevy dealership in the 70's those hoods would fold when they were new. $20 cheep and easy fix/insurance.
Rnd is offline   Reply With Quote
Old 11-08-2013, 11:40 AM   #8
blazer2007
Registered User
 
Join Date: Jan 2007
Location: vernon b.c.
Posts: 3,022
Re: Kinked and Bowed Hood

dumg question but what did you use ,I used some spray but I think it made it worse
blazer2007 is offline   Reply With Quote
Old 11-08-2013, 08:33 PM   #9
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,369
Re: Kinked and Bowed Hood

I think the owners manual says to use regular motor oil on the hinges. I'm surprised I don't ever see this. I have had about 5 squares over the last 30 years and never kinked a hood. My current truck hood was a little stiff last week and I oiled it. I have kinked a couple of my cutlass hoods years ago and I am sensitive to stiff hinges now.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 11-09-2013, 03:03 PM   #10
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,975
Re: Kinked and Bowed Hood

I use Wurth HHS 2000 and spray the whole spring and hinge down.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.
hatzie is offline   Reply With Quote
Reply

Bookmarks

Tags
chevrolet, gmc, hood, hood brace kit, kinked hood


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com