The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-10-2003, 09:57 AM   #1
butter
Registered User
 
butter's Avatar
 
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
one more time tire size

Who is running 17x9.5 or 17x11 on the rear and what is the biggest tire you can run with out scrubbing. Pictures Please
__________________
71 cheyenne 402 th400 swb
71 camper special (PARTS TRUCK)
70 Stepside swb 350
butter is offline   Reply With Quote
Old 12-10-2003, 11:19 AM   #2
RED71CHEVY
Registered User
 
RED71CHEVY's Avatar
 
Join Date: Dec 1999
Location: LEXINGTON,SC,USA
Posts: 208
I AM RUNNING 17x9.5 EAGLE ALLOY 211 WITH 4.5 BS, TIRE SIZE IS 285-60-17, THEY ARE ABOUT 30.5" TALL AND HAVE A 11.5" SEC WIDTH, ALSO REAR HAS A 4" DROP WITH COIL SPRINGS.
I SHOULD HAVE GONE WITH A 5" BS. I GET SOME SLIGHT RUBBING WHEN I TURN IN TO A DRIVEWAY THAT GOES UP HILL, THE BODY FLEX LETS THE BED MOVE, I AM GOING TO TRY AN ADJ PAN HARD BAR TO RECENTER THE REAR, ALSO I HAVE A NEW SWAY BAR SETUP THAT I AM GOING TO TRY ON THE REAR.
__________________
TIM
'71 CUSTOM C-10 torch red ,350 roller GM crate,3.73 GEARS, REAR 4"DROP SPRING, FRONT 2.5" DROP SPINDLE-1.5"lower spring, FRONT=17x8(4.5bs) W/265-60-17, BACK=17x9.5 (5bs)W/285-60-17, Vintage Air Sure Fit AC------NEVER ENDING PROJECT!!
RED71CHEVY is offline   Reply With Quote
Old 12-10-2003, 01:30 PM   #3
butter
Registered User
 
butter's Avatar
 
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
Thanks red71chevy that is what Iam looking for. Do you still have stock wheel tubs?
__________________
71 cheyenne 402 th400 swb
71 camper special (PARTS TRUCK)
70 Stepside swb 350
butter is offline   Reply With Quote
Old 12-10-2003, 07:20 PM   #4
butter
Registered User
 
butter's Avatar
 
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
ttt
__________________
71 cheyenne 402 th400 swb
71 camper special (PARTS TRUCK)
70 Stepside swb 350
butter is offline   Reply With Quote
Old 12-11-2003, 01:33 PM   #5
RED71CHEVY
Registered User
 
RED71CHEVY's Avatar
 
Join Date: Dec 1999
Location: LEXINGTON,SC,USA
Posts: 208
the tubs are stock, fleet side bed. good luck.
__________________
TIM
'71 CUSTOM C-10 torch red ,350 roller GM crate,3.73 GEARS, REAR 4"DROP SPRING, FRONT 2.5" DROP SPINDLE-1.5"lower spring, FRONT=17x8(4.5bs) W/265-60-17, BACK=17x9.5 (5bs)W/285-60-17, Vintage Air Sure Fit AC------NEVER ENDING PROJECT!!
RED71CHEVY is offline   Reply With Quote
Old 12-11-2003, 02:06 PM   #6
Ackattack
Senior Member
 
Ackattack's Avatar
 
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
I have looked into getting 17x11 for my truck, but here is why I have decided not to. I think a truck needs more sidewall than a car, so I want to run 275/50/17s up front on a 17x9 or 9.5 rim. On the back alls I could find was 315/35/17...much shorter than the fronts would be. So I will go with the 17x9 rims all the way around.
Ackattack is offline   Reply With Quote
Old 12-11-2003, 05:40 PM   #7
butter
Registered User
 
butter's Avatar
 
Join Date: Jan 2000
Location: Orange Beach, Alabama
Posts: 133
Thanks red71chevy for the info.
__________________
71 cheyenne 402 th400 swb
71 camper special (PARTS TRUCK)
70 Stepside swb 350
butter is offline   Reply With Quote
Old 12-11-2003, 06:47 PM   #8
lolife99
67-72 parts collector,…
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,692
I have a set of 17x8 and 17x9.5 Eagle 212's, that I ran on my old '82 2wd Blazer. I ran Nitto 255/50's and 275/50's with no problems. These are pretty affordable tires. I hope to run them on my '71 swb. 5 inch backspace on the front and 4.5 inch backspace on the back.
lolife99 is offline   Reply With Quote
Old 12-13-2003, 09:56 PM   #9
RED71CHEVY
Registered User
 
RED71CHEVY's Avatar
 
Join Date: Dec 1999
Location: LEXINGTON,SC,USA
Posts: 208
i have 265-60-17 at the front and 285-60-17 at the back.
i had been running eagle 212's 17x8 all around with 275-55-17...
both tire combinations give more that 5"+ of side wall, they look good and you still can haul the trash off without worring about pot holes, road joints, and the uneven pavement!!!!
__________________
TIM
'71 CUSTOM C-10 torch red ,350 roller GM crate,3.73 GEARS, REAR 4"DROP SPRING, FRONT 2.5" DROP SPINDLE-1.5"lower spring, FRONT=17x8(4.5bs) W/265-60-17, BACK=17x9.5 (5bs)W/285-60-17, Vintage Air Sure Fit AC------NEVER ENDING PROJECT!!

Last edited by RED71CHEVY; 12-13-2003 at 10:00 PM.
RED71CHEVY is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com