I picked up a nice used steve schimdt 565 big block saturday. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

468BIGBLOCK · 11-11-2013, 05:57 PM

i just got the good used only 60 passes on it. 565 inch steve schimdt 565. 15.5 to 1 compression solid roller. makes 1100 horse on methanol. comp belt drive. t&d shaft mount rocker arms. pro top line 365 heads. dart big m block standard 9.8 deck. ran 4.50 in the eighth in a 2000 pound rear engine dragter. came with a 1300 cfm ruperts alky carb and a electric water pump and a 1 wire racing alternator,starter and msd pro billet distributor. i may put it in my 69 chevy nova yenko clone.

468BIGBLOCK · 11-11-2013, 06:01 PM

more pics.

468BIGBLOCK · 11-11-2013, 06:13 PM

more pic i might put it in this. i am now running a stock bore 427 bbc with stock gm 880 iron heads race weight is 3720 pounds runs 7.50 in the eighth and 6.90 on a 125 shot of nitrous. foot braking a super tight converter.

ItsRandy · 11-11-2013, 08:53 PM

Good deal?

468BIGBLOCK · 11-12-2013, 09:32 AM

Quote:

Originally Posted by ItsRandy

Good deal?

about half of what a new one cost.

bbcmudtruck · 11-12-2013, 01:57 PM

Then yes, I'd say excellent deal! Definitely a good motor for the Nova. Swap the Nova motor out to your pickup and call it a day!

**PGSigns** · 11-18-2013, 07:36 AM

Your gonna need more car for that one. You may find your current setup hard to drive under full power.
Jimmy

RustyBucket · 11-24-2013, 10:16 AM

Would you race it "as-is" or disassemble it and freshen/inspect it first? Might save a lot of money in the long run. My neighbor has a NICE black '68 Nova, 540 Merlin, glide, T. brake, 4 link Dana 60. Its licensed and marginally streetable. Best so far of 9.97@143 on drag radials. Launches pretty good on a well prepared track but a month or so ago he had it out on a lonesome street and it got away when he shifted. Went WAY off the road and backed lightly into a pole. Light damage but still $$$.

468BIGBLOCK · 11-25-2013, 02:55 PM

Quote:

Originally Posted by PGSigns

Your gonna need more car for that one. You may find your current setup hard to drive under full power.
Jimmy

I think that my car will work. mini tubed 12 bolt with 35 spine axles, dennys custom nitrous driveshaft. caltracs with ranchos in the rear. tubular control arms in the front and QA1 adjustable coil overs in the front. car has been 5.59 in the 1/8 mile with a 496 on a fogger.

468BIGBLOCK · 11-25-2013, 03:03 PM

Quote:

Originally Posted by RustyBucket

Would you race it "as-is" or disassemble it and freshen/inspect it first? Might save a lot of money in the long run. My neighbor has a NICE black '68 Nova, 540 Merlin, glide, T. brake, 4 link Dana 60. Its licensed and marginally streetable. Best so far of 9.97@143 on drag radials. Launches pretty good on a well prepared track but a month or so ago he had it out on a lonesome street and it got away when he shifted. Went WAY off the road and backed lightly into a pole. Light damage but still $$$.

I am not going to touch this engine. i have known the guy that i bought it off of for years. he had to sell it as part of a divorce settlement. freshened this year my a local very well known race engine builder. i helped pull it out of his car myself. it went 4.40 in the eighth in a 2000 pound rear engine dragster. it went 7.34 in the 1/4 of a mile. i will either put it in my nova or a 3000 pound malibu. it will go fives in the 1/8 or eights in the 1/4 in a 3000 pound car. next year will tell.

468BIGBLOCK · 01-02-2014, 10:29 AM

more pics.

cableguy0 · 01-04-2014, 06:36 PM

Please Please get that engine off of that tripod stand. It would be a shame to see that thing laying on its side on the floor.Those stands are notoriously bad about tipping over. A 4 wheel stand is the only way to go. Nice score though. I vote drop it in the nova. I have always had a soft spot for those novas.

11-11-2013, 05:57 PM	#1
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	I picked up a nice used steve schimdt 565 big block saturday. i just got the good used only 60 passes on it. 565 inch steve schimdt 565. 15.5 to 1 compression solid roller. makes 1100 horse on methanol. comp belt drive. t&d shaft mount rocker arms. pro top line 365 heads. dart big m block standard 9.8 deck. ran 4.50 in the eighth in a 2000 pound rear engine dragter. came with a 1300 cfm ruperts alky carb and a electric water pump and a 1 wire racing alternator,starter and msd pro billet distributor. i may put it in my 69 chevy nova yenko clone. Attached Images __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS.. Last edited by 468BIGBLOCK; 11-11-2013 at 06:03 PM.

11-11-2013, 06:01 PM	#2
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: I picked up a nice used steve schimdt 565 big block saturday. more pics. Attached Images __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

11-11-2013, 06:13 PM	#3
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: I picked up a nice used steve schimdt 565 big block saturday. more pic i might put it in this. i am now running a stock bore 427 bbc with stock gm 880 iron heads race weight is 3720 pounds runs 7.50 in the eighth and 6.90 on a 125 shot of nitrous. foot braking a super tight converter. Attached Images __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

11-11-2013, 08:53 PM	#4
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: I picked up a nice used steve schimdt 565 big block saturday. Good deal?

11-12-2013, 01:57 PM	#6
bbcmudtruck Registered User Join Date: Nov 2012 Location: ravenwood, mo Posts: 709	Re: I picked up a nice used steve schimdt 565 big block saturday. Then yes, I'd say excellent deal! Definitely a good motor for the Nova. Swap the Nova motor out to your pickup and call it a day!

11-18-2013, 07:36 AM	#7
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: I picked up a nice used steve schimdt 565 big block saturday. Your gonna need more car for that one. You may find your current setup hard to drive under full power. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-24-2013, 10:16 AM	#8
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,055	Re: I picked up a nice used steve schimdt 565 big block saturday. Would you race it "as-is" or disassemble it and freshen/inspect it first? Might save a lot of money in the long run. My neighbor has a NICE black '68 Nova, 540 Merlin, glide, T. brake, 4 link Dana 60. Its licensed and marginally streetable. Best so far of 9.97@143 on drag radials. Launches pretty good on a well prepared track but a month or so ago he had it out on a lonesome street and it got away when he shifted. Went WAY off the road and backed lightly into a pole. Light damage but still $$$. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

01-02-2014, 10:29 AM	#11
468BIGBLOCK MEMBER OF THE JUNK MAN CLUB Join Date: Jul 2001 Location: paragould arkansas 72450 Posts: 425	Re: I picked up a nice used steve schimdt 565 big block saturday. more pics. Attached Images __________________ I LIKE 67-72 CHEVYS, I HAVE OWNED OVER 150 OF THEM IN THE LAST 25 YEARS..

01-04-2014, 06:36 PM	#12
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: I picked up a nice used steve schimdt 565 big block saturday. Please Please get that engine off of that tripod stand. It would be a shame to see that thing laying on its side on the floor.Those stands are notoriously bad about tipping over. A 4 wheel stand is the only way to go. Nice score though. I vote drop it in the nova. I have always had a soft spot for those novas. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.