|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-04-2014, 11:23 PM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Fairview, Or
Posts: 10
|
3/4 ton track bar mount
I have a 63 3/4 long bed with coil springs. I want to keep the trailing arms and am replacing the eaton with a 14bolt ff. My only problem is coming up with a track bar mount that I can weld on the axle housing. The original eaton still has the mount that I can try to cut off but thought if I was able to get a new mount it would make life a lot easier. Any help is much appreciated. I will try to post pics tomorrow. thanks guys
__________________
1963 c/10 Changed to 3/4ton 292ci Borg t98 1965 Buick Skylark 300ci TH350 1976 AMF Shovelhead 4 Speed 1982 K20 4x4 454ci sm465 1991 GMC k20 Suburban 4x4 350ci 4l80e 1999 GMC Jimmy 4x4 262ci 4l60e (wife's rig) |
|
|
|
02-05-2014, 02:52 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: 3/4 ton track bar mount
If you are planning on using the original panhard bar, then cutting the mount off of the Eaton is your best bet. I do make the trailing arm mounts for the 14 bolts, but I have not gotten around to making the panhard bar mounts yet. Most guys just cut the original off of the Eaton.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
