|
03-10-2014, 11:20 PM | #1 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
And this was in front of the seat - similar to the other side.
|
03-10-2014, 11:21 PM | #2 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Overall shot of tonight's mess...
|
03-10-2014, 11:40 PM | #3 |
Registered User
Join Date: Dec 2013
Location: Kitscoty,Alberta
Posts: 36
|
Re: 1980 Stepside Build... My first build thread
Great job on the rust repair.
|
03-16-2014, 09:50 AM | #4 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: 1980 Stepside Build... My first build thread
Nice work! Damn shame about that red Blazer, glad everyone was ok.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
03-16-2014, 02:08 PM | #5 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Thanks Elco! I have now fixed all of the rust that I know about. Hopefully there won't be any surprises when I am prepping for paint.
|
03-16-2014, 03:40 PM | #6 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: 1980 Stepside Build... My first build thread
Looking good.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
03-17-2014, 12:28 AM | #7 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Not much to report for today. Bled the brakes at all four wheels again - and I think I may still have some air trapped in the system.
Also finally got around to a fun project. The stock exhaust has been driving me nuts. Way too quiet. So, I cut off the muffler and tailpipe, and sectioned it back together to come out under the drivers side step. Now the only thing quieting it down is the cat. I also made a larger exhaust tip from some scrap tubing I had laying around. Here are a couple pics. As so as I can figure it out, I'll post a vid. It sounds much better, but still quiet enough to drive. |
03-17-2014, 12:30 AM | #8 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
And another
|
03-17-2014, 03:53 PM | #9 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Found my next part today at lunch. I needed a factory type air cleaner assembly to try and get this thing to pass smog. Found an original air cleaner at a local wrecking yard for $25. Only problem is that my truck doesn't have the original vari jet carb. The carb was replaced with a rochester 2-jet. So my air cleaner has a rectangular hpole where it mounts to the carb, but I have a round air horn on my carb. Going to have to do some fab work tonight to fit a round peg in a square hole. Looks like I'm going to continue to get good use of the steel left in my original fender!
|
03-18-2014, 11:07 PM | #10 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Here is the air cleaner I modified to fit
|
03-19-2014, 10:40 AM | #11 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: 1980 Stepside Build... My first build thread
I'd just clean up what you have, if the throttle shafts are tight. Get a piece of 3/8 plate and make a proper adapter, and give it a whirl. If it don't work, you ain't out much.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
03-19-2014, 09:39 PM | #12 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
That's what I decided to do, Low Elco. But I'm going to have to make a 2 piece adapter to make it work. 1/2" base drilled to the varajet pattern, with a 1" thick top piece drilled for the 2jet. Has to be 2 piece to clear the throttle linkage with the venturis lined up. I ordered a carb kit, and a set of 42 jets to replace the 56's that were in there. Probably won't have anything to report until all of my parts arrive next week, but keeping my fingers crossed.
|
03-20-2014, 11:59 PM | #13 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Today, I had one of the guys in my shop cut me a couple of chunks of scrap aluminum for my new carb adapter. Made the base out of 1/2" and the top out of 1". The two pieces will bolt together using flathead 5/16" screws. I'll have to buy the screws tomorrow, but here are a few shots of my progress
|
03-21-2014, 12:01 AM | #14 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Here is a shot with the throttle body sitting on it. The linkage is what it had to be two piece.
|
03-21-2014, 12:02 AM | #15 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Close up
|
03-28-2014, 08:20 AM | #16 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: 1980 Stepside Build... My first build thread
Nice tight work! Do you own a machine shop/fab shop? Hope it works out, that's a much better adaptor.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
03-28-2014, 12:33 PM | #17 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
I work for a steel fabrication shop. One of the guys used our CBC plasma table to cut out the basic shapes for me. The rest I did myself with a die grinder, angle grinder, and a drill press. Now the carb bores line up with the manifold, and last night I mocked up the pieces of the carb to see if the air cleaner will still fit - looks good so far!
Just need my carb kit and jets... |
03-28-2014, 12:46 PM | #18 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: 1980 Stepside Build... My first build thread
Lucky dog. Man, I miss my big fab stuff I had free access to back in the day.
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
03-28-2014, 01:02 PM | #19 |
Registered User
Join Date: Mar 2014
Location: Clearfield Utah
Posts: 638
|
Re: 1980 Stepside Build... My first build thread
On the first page it looks like you moved the rear springs closer to the frame.
__________________
My build thread. 1977 C10 short box. >>>> http://67-72chevytrucks.com/vboard/s...d.php?t=624182 700R4 build thread. >>> http://67-72chevytrucks.com/vboard/s...36#post6740236 |
03-28-2014, 02:18 PM | #20 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
The rear springs are in their stock locations, with original hangers, shackles, etc. I just flipped the axle to the top of the springs.
I called Mike this morning, and found that he had forgotten to ship my order! He is sending it out priority this morning, so I hope to have it by tomorrow, but it probably won't show until Monday. In the meantime, I'm going to get started on the exhaust. I don't think that there is any way the ancient stock pellet type converter is going to get me thru smog, so I ordered a pair of new converters this morning from napa. Should have them this afternoon. Going to remove the "y" ahead of the converter and go true duals. Two cats and no mufflers. Too bad I won't get to hear it until I get my carb parts. |
03-28-2014, 02:42 PM | #21 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: 1980 Stepside Build... My first build thread
That's a good looking adapter. Great job. I likes it.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
03-28-2014, 07:54 PM | #22 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Got started on the exhaust while I was waiting for parts. Court out the existing system just ahead of the "y"...
|
03-28-2014, 07:55 PM | #23 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
Drug the rest of the system out from under the truck.
|
03-28-2014, 07:57 PM | #24 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
And isn't this exhaust manifold just begging for true duals?
|
03-28-2014, 08:02 PM | #25 |
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: 1980 Stepside Build... My first build thread
I also decided to finally remove my rear bump stop mounts. It's a real pain getting a grinder to the rivet heads. Once I got them ground off, I managed to drop a large chisel on my face while trying to pound them off. Ouch.
But they are gone now, and I gained 2" of wheel travel - up from my original 1" to a huge 3". Once I have it on the road, I'll see if I have to do a c-notch. |
Bookmarks |
|
|