![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
WTB 60-66 suburban or panel filler neck
60-66 suburban or panel filler neck, door and sheet metal. I want to install a door and fill assembly in my 64 fleet. I have the fuel tank already under the bed.
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: WTB 60-66 suburban or panel filler neck
I have a door off of a 59 nomad, it might work if you can't find anything else.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Thanks. I'll keep it in mind. Is it just the door? Do you have a pic? After a quick web search, it looks to have a lot of curve. Quite a bit more than fleetside bed?
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. Last edited by ljackson; 01-19-2014 at 02:33 PM. |
![]() |
![]() |
![]() |
#4 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: WTB 60-66 suburban or panel filler neck
I have some Suburban/Panel fuel fill doors with the surrounding sheetmetal. I'll have to check and see if I have any fill tubes left.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Thanks, Capt
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Any luck Capt.?
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#7 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: WTB 60-66 suburban or panel filler neck
Sorry but I haven't had much time with working 12hrs a day 7 days a week. I did not find a filler tube at my shop, but I should have one at home in the garage. I just need to find the time to look for it. I'll try and get to it this weekend.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Thanks Capt. I apologize. I didn't mean to rush you. I'm getting ready to do it in March when the weather warms.
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#9 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: WTB 60-66 suburban or panel filler neck
No need to apologize. I did find some filler tubes. I'll send you a PM.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#10 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: WTB 60-66 suburban or panel filler neck
Here are a few pics of what I have. It does have a small rust hole on the backside as shown in the one pic.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Thanks Capt for fixin me up, it looks good to me. It appears to be easily repairable. Just to be sure I understand how these fit, the "box" will go between the inner and outer bed sides (skins) and the filler will connect to my tank on the plane between the top of the frame and the bottom of the bed wood? When it is set up like described, the curves will match?
Capt. Said "It looks like the shipping will be $21.00 which makes the total $86.00". actual shipping was $32.75 Capt, I want it. PM sent
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. Last edited by ljackson; 02-22-2014 at 06:50 PM. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: WTB 60-66 suburban or panel filler neck
I did look at the wagon one and it is way to curved for a pickup.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Thanks for the input.
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#14 | |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: WTB 60-66 suburban or panel filler neck
I haven't installed one of these in a pickup box yet, but yes the filler tube should pass between the top of the frame and the bed floor. If you are using the Blazer tank, you may have to modify the filler tube , the tank neck or both. It shouldn't be difficult to do.
The inner box of the filler door assembly will interfere with the inner bed panel. You will need to either trim the fill door box, or make a small bulge in your inner bed panel. The Suburbans and Panels have a bulge in the inner wall to accomodate the filler box. I replied to your PM. Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
Quote:
If anyone that is following this wants to see what I built: http://67-72chevytrucks.com/vboard/s...d.php?t=428182 Post # 4. Thanks, I have not been able to actually look a sub or panel. I’ve been trying to see from forum photos. I believe this is going to work well. PM sent regarding Payment
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2009
Location: Amarillo, Texas
Posts: 636
|
Re: WTB 60-66 suburban or panel filler neck
The filler arrived in great shape. Thanks to Captainfab. Balance for shipping sent to capt's PP acct.
__________________
Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery. |
![]() |
![]() |
![]() |
#17 |
Registered User
![]() Join Date: Dec 2013
Location: Fort Mitchell, AL (out the back gate of Ft Benning)
Posts: 140
|
Re: WTB 60-66 suburban or panel filler neck
By chance, do you have another one of these door setups?
__________________
SSG Walker Harris '72 Cheyenne Longbed '66 Panel '66 Short Stepside '65 Short Fleetside |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
60-66, filler neck, fuel door, panel, suburban |
|
|