Gas pedal swap DBW

[Houston Ben]

Hi all,
My foot and leg are getting tired of the pedal location of my 2011 5.3 DBW pedal. I have seen where you can use a Corvette or Monte Carlo DBW pedal but just need to switch two wires, does anyone know what I have to do to make it work?

Thanks,

Ben

[dayj1]

Originally Posted by Houston Ben

Hi all,
My foot and leg are getting tired of the pedal location of my 2011 5.3 DBW pedal. I have seen where you can use a Corvette or Monte Carlo DBW pedal but just need to switch two wires, does anyone know what I have to do to make it work?

Thanks,

Ben

It's pin D and F that need to be swapped at the pedal connector to use a Corvette or Monte Carlo pedal. I found a new in the box GM DBW Monte Carlo pedal on eBay for $25 when I did the swap in my '57 BelAir. The GM part number is 25830024 and it usually runs around $100. There are aftermarket OEM replacement pedals available for around $60.

[Houston Ben]

Awesome, thanks Dayj1!!

[Houston Ben]

One more dayj1, is the pigtail the same? Will the truck one plug into the others?

Thanks!

[Hart_Rod]

Originally Posted by Houston Ben

One more dayj1, is the pigtail the same? Will the truck one plug into the others?

Thanks!

The connectors are the same. Just swap the two wires dayj1 spoke about.

[Houston Ben]

Thanks, you guys are awesome!! I do not understand all the wireing diagrams and you all are a big help!!

[Houston Ben]

Is there a preference for the corvette one or monte one, or are they about the same?

[Hart_Rod]

Originally Posted by Houston Ben

Is there a preference for the corvette one or monte one, or are they about the same?

I used the corvette one because I like the way it mounted and the plastic pedal was identical to the factory pedal in the 71/72 trucks, .

[Houston Ben]

Cool, thanks again!

[Houston Ben]

Just bought a corvette on for $58 on eBay!

[BR3W CITY]

I assume you mean the pedal, cuz if you just bought a whole vette for $58 your a god.

[Houston Ben]

Lol, yup the pedal. Was supposed to be one not on