The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2014, 08:44 PM   #1
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 884
Truck Wont Start

We have a 1970 C10 with some wiring problems.

The truck will not start but has a good running 350 SB.

The truck has had problems starting up before but we've always been able to fix it, mainly by playing with the wiring from the ignition switch (we assumed we were having a bad ignition switch connection).

We were in the process of cleaning the wiring and tracing wires due to the poor quality of the wiring.
At some point, we must have created a short because the battery got drained to 6 Volts in a short period of time (1 hour or so)

The normal things such as windshield wipers, headlights, taillights & dome lights worked up until now but they wont even come on/work (which we guess is due to battery being drained so low).


So, we're facing finding the short in system or starting over with a new wiring harness.

Suggestions?
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

Last edited by KyleSeal; 05-18-2014 at 09:10 PM. Reason: Additional Info
KyleSeal is offline   Reply With Quote
Old 05-19-2014, 11:48 AM   #2
VetteVet
Msgt USAF Ret

 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,718
Re: Truck Wont Start

Start by checking the fusible link at the battery positive wire to the right fender junction bolt. This is is the safety fuse for all the Key off power functions including the key switch.

If you have no power on the junction bolt then something has shorted and burned the link out. You will need to find the short before you replace the link or it will just blow again.
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.
VetteVet is offline   Reply With Quote
Old 05-19-2014, 09:27 PM   #3
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 884
Re: Truck Wont Start

My dad actually found the problem (for now) - the last owner had the wrong wires in the wrong places for the ignition.

But, like I said, for now.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is offline   Reply With Quote
Reply

Bookmarks

Tags
ignition, selonoid, starter, wiring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:00 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com