![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2012
Location: Boulder, CO
Posts: 350
|
Re: T5 question
Stripping the case to look in it- the tailshaft housing needs to come off. There's a roll pin that holds the shifter selector block to the selector rod- drive it out and pull the tail off the selector shaft. The cover should be sealed with black RTV, but don't beat on the case cover too much- once it's off, inspection can proceed. That's the quickie version, there's a couple good tutorials on these gearboxes that will show the exact way to do it right.
__________________
If 'that which does not kill me, makes me stronger', then I should be Superman by now! |
![]() |
![]() |
![]() |
Bookmarks |
|
|