|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
06-12-2014, 12:42 AM
|
#12 |
|
Moderator
 
Join Date: May 2007
Location: Southern Cal
Posts: 20,023
|
Re: Fluid pouring out of TH350 when vacuum modulaor removed, hard time getting into 3
The governor is not your problem. If it was the transmission would not upshift at all. The vacuum modulator or a cracked hose causing a vacuum leak going to it is what I would suspect. I had the same problem with a TH400, and this is what I was told. Turned out I had a brittle spot in the line and it was cracked, causing a slight vacuum leak. Replaced the line, problem solved.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul |
|
|
| Bookmarks |
| Tags |
| shifting problems, th350, tranny, vacuum modulator, vacuum valve |
|
|
Threaded Mode