Show your current set up and how you got there or where its goin. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tennessee Bowtie · 06-29-2014, 08:46 PM

Hello everyone!!! I am starting this thread to allow everyone to explain a little about their builds. Show before and afters and also include some of the future mods. With this in mind if you experienced a very tricky portion like the ls swap harness or modifying a column to fit show everyone pictures and explain how you over came the obstacle and what you think would be easier. Lets us know if you need something to help your get past a hump in your build or if you have something that could help someone else. Also if you painted for the first time or tore apart a engine let everyone know your not a nob anymore.

To all my brand new toy is a 1969 C10 SWB with a inline 6 and 3 spd on the column. I have already acquired a 5.3 with 4L60E and when I did I also got the steering column, under dash heather box, whole front end disc brakes and all, both in cab harness and underhood harness and fuse box, fuel tank, with 10 bolt rear end with disc brakes and dash cluster and plastic. Does anyone think I should use any or does anyone need any of these items? Currently i need little stuff like 5.3 re-ring and gasket kit i should be ordering soon hopefully and ls mounts and brackets which i have already pm'd someone hoping to get them.

Current plans are to get motor and tranny in. Then take out to build and install under hood harness.

Does anyone have any easy tips on under hood harness its a 99 harness and fuse box. Also i was wondering what year and vehicle tilt steering columns will fit in it. ok lets see some pics.

Tennessee Bowtie · 06-29-2014, 08:55 PM

another pic

**undertaker72** · 06-29-2014, 09:12 PM

wow that's a very nice truck , I know ill get ye;;ed at but in my opinion id leave that girl alone and find a project truck for your newer build , just my 2 cents , very nice truck

Tennessee Bowtie · 06-29-2014, 09:30 PM

Thanks man. I have had more than one tell me not to do it. I originally was gonna sell it and find one to build but everyone wanted to offer 5k lol and I wasn't gonna take less than 8.5 but now it's gonna be a build I guess. Anyway put up some pics of yours and some info....

Woodnears · 06-29-2014, 10:30 PM

It's been a long journey but it's all coming together. Thanks to you guys on this forum. I did all the body work myself over the last few years. Shortly we'll be working on getting the suspension finished up and driveline installed.

Woodnears · 06-29-2014, 10:35 PM

Here it is today. Porterbuilt mostly installed.

Tennessee Bowtie · 06-29-2014, 10:36 PM

Nice truck man! The member on this forum are what inspired me to do my build. Don't call it quits man. Push forward and keep us updated.

Tennessee Bowtie · 06-29-2014, 10:39 PM

Man that porterbuilt is nice. Wish I could afford a set up like that. How much do you have in the pb?

Tennessee Bowtie · 06-29-2014, 10:40 PM

Are you goin ls?

Woodnears · 06-29-2014, 11:04 PM

Most likely ls for power yes. Full extreme porterbuilt all around with all the fixins. Thanks for the compliments. I'm currently looking for the right deal on spindles, not sure just yet what to use.

jtp67-72 · 06-30-2014, 12:10 AM

here's a little inspiration on the Porterbuilt route....chassis done ...cab on by August...jim

Woodnears · 06-30-2014, 12:19 AM

Jtp I like your color choice on that frame. I've been thinking the same will go on mine.

69chevytrucker · 06-30-2014, 01:29 AM

here is mine
Name: 15946699_large.jpg
Views: 1845
Size: 90.0 KB

Name: IMG1447.jpg
Views: 1828
Size: 68.2 KB

*low&slow* · 06-30-2014, 02:18 AM

Before: 1969 c10 ~ After: 1967 c10 ~ Plans: 10 second street legal drag truck. Lowered, coil overs front and rear, chop top 2 3/4" rear 3" front, custom one piece front clip, custom interior, custom paint, and tons more.

VA72C10 · 06-30-2014, 02:39 AM

Quote:

Originally Posted by Tennessee Bowtie

another pic

Great truck. I'd love to see it sometime. I travel down that way for work usually once a month. Hoping to plan a gathering of 67-72 fans around Richmond soon and invite all those who want to attend from all over the state and adjoining states.

Tennessee Bowtie · 06-30-2014, 07:52 AM

You can come whoever you would like. I have another friend with a really really nice build pb drop member ect. But come by. Maybe u can give some much needed insight. Thanks everyone for the replies. Nice trucks.

Tennessee Bowtie · 06-30-2014, 08:00 AM

Here one when it was for sale but it's not anymore.

Tennessee Bowtie · 06-30-2014, 08:37 AM

Quote:

Originally Posted by 69chevytrucker

here is mine
Attachment 1272389

Attachment 1272390

Is that a new grill or did u sand and paint the old one?

Tennessee Bowtie · 07-07-2014, 11:03 AM

Bump

88fordf150 · 07-07-2014, 11:22 AM

Here are 2 before pictures and 2 current ones. I'm going for the Gasser look, 454 with a GM 671 blower & Muncie 4 speed.

Tennessee Bowtie · 07-08-2014, 08:45 AM

It that frame is real nice! R u planning to run a lsx? What size are those wheels?

Tennessee Bowtie · 07-08-2014, 08:45 AM

Jt sorry auto correct

Tennessee Bowtie · 07-08-2014, 08:54 AM

Brad that blower is sick!

Agent915 · 07-08-2014, 08:19 PM

Quote:

Originally Posted by jtp67-72

here's a little inspiration on the Porterbuilt route....chassis done ...cab on by August...jim

That's beautiful right there!! What's the story on those battery trays? I would love to run something like that! I've done a LOT of work to clean up my engine bay to stick a battery in it.
Danny

jtp67-72 · 07-08-2014, 08:23 PM

Quote:

Originally Posted by Agent915

That's beautiful right there!! What's the story on those battery trays? I would love to run something like that! I've done a LOT of work to clean up my engine bay to stick a battery in it.
Danny

Those are from trail gear..cant fab them for this price....they make a cool double one too if u want them together...look at them close ..this design u can drill and bolt or add brackets under like i did .....makes installation to your choice easy imo!!...jim

http://www.ebay.com/itm/Trail-Gear-D...4d50da&vxp=mtr

06-29-2014, 08:46 PM	#1
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Show your current set up and how you got there or where its goin. Hello everyone!!! I am starting this thread to allow everyone to explain a little about their builds. Show before and afters and also include some of the future mods. With this in mind if you experienced a very tricky portion like the ls swap harness or modifying a column to fit show everyone pictures and explain how you over came the obstacle and what you think would be easier. Lets us know if you need something to help your get past a hump in your build or if you have something that could help someone else. Also if you painted for the first time or tore apart a engine let everyone know your not a nob anymore. To all my brand new toy is a 1969 C10 SWB with a inline 6 and 3 spd on the column. I have already acquired a 5.3 with 4L60E and when I did I also got the steering column, under dash heather box, whole front end disc brakes and all, both in cab harness and underhood harness and fuse box, fuel tank, with 10 bolt rear end with disc brakes and dash cluster and plastic. Does anyone think I should use any or does anyone need any of these items? Currently i need little stuff like 5.3 re-ring and gasket kit i should be ordering soon hopefully and ls mounts and brackets which i have already pm'd someone hoping to get them. Current plans are to get motor and tranny in. Then take out to build and install under hood harness. Does anyone have any easy tips on under hood harness its a 99 harness and fuse box. Also i was wondering what year and vehicle tilt steering columns will fit in it. ok lets see some pics. Attached Images

06-29-2014, 08:55 PM	#2
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. another pic Attached Images

06-29-2014, 09:12 PM	#3
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Show your current set up and how you got there or where its goin. wow that's a very nice truck , I know ill get ye;;ed at but in my opinion id leave that girl alone and find a project truck for your newer build , just my 2 cents , very nice truck

06-29-2014, 09:30 PM	#4
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Thanks man. I have had more than one tell me not to do it. I originally was gonna sell it and find one to build but everyone wanted to offer 5k lol and I wasn't gonna take less than 8.5 but now it's gonna be a build I guess. Anyway put up some pics of yours and some info....

06-29-2014, 10:30 PM	#5
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Show your current set up and how you got there or where its goin. It's been a long journey but it's all coming together. Thanks to you guys on this forum. I did all the body work myself over the last few years. Shortly we'll be working on getting the suspension finished up and driveline installed. Attached Images

06-29-2014, 10:35 PM	#6
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Show your current set up and how you got there or where its goin. Here it is today. Porterbuilt mostly installed. Attached Images

06-29-2014, 10:36 PM	#7
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Nice truck man! The member on this forum are what inspired me to do my build. Don't call it quits man. Push forward and keep us updated.

06-29-2014, 10:39 PM	#8
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Man that porterbuilt is nice. Wish I could afford a set up like that. How much do you have in the pb? Last edited by Tennessee Bowtie; 06-29-2014 at 11:05 PM.

06-29-2014, 10:40 PM	#9
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Are you goin ls?

06-29-2014, 11:04 PM	#10
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Show your current set up and how you got there or where its goin. Most likely ls for power yes. Full extreme porterbuilt all around with all the fixins. Thanks for the compliments. I'm currently looking for the right deal on spindles, not sure just yet what to use.

06-30-2014, 12:10 AM	#11
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Show your current set up and how you got there or where its goin. here's a little inspiration on the Porterbuilt route....chassis done ...cab on by August...jim Attached Images __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

06-30-2014, 12:19 AM	#12
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 618	Re: Show your current set up and how you got there or where its goin. Jtp I like your color choice on that frame. I've been thinking the same will go on mine.

06-30-2014, 01:29 AM	#13
69chevytrucker Registered User Join Date: Apr 2014 Location: calgary alberta Posts: 1,248	Re: Show your current set up and how you got there or where its goin. here is mine

06-30-2014, 02:18 AM	#14
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Show your current set up and how you got there or where its goin. Before: 1969 c10 ~ After: 1967 c10 ~ Plans: 10 second street legal drag truck. Lowered, coil overs front and rear, chop top 2 3/4" rear 3" front, custom one piece front clip, custom interior, custom paint, and tons more. Attached Images

06-30-2014, 07:52 AM	#16
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. You can come whoever you would like. I have another friend with a really really nice build pb drop member ect. But come by. Maybe u can give some much needed insight. Thanks everyone for the replies. Nice trucks.



Register or Log In To remove these advertisements.

06-30-2014, 08:00 AM	#17
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Here one when it was for sale but it's not anymore. Attached Images

07-07-2014, 11:03 AM	#19
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Bump

07-07-2014, 11:22 AM	#20
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Show your current set up and how you got there or where its goin. Here are 2 before pictures and 2 current ones. I'm going for the Gasser look, 454 with a GM 671 blower & Muncie 4 speed. Attached Images __________________ Brad handshoe

07-08-2014, 08:45 AM	#21
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. It that frame is real nice! R u planning to run a lsx? What size are those wheels?

07-08-2014, 08:54 AM	#23
Tennessee Bowtie Registered User Join Date: Apr 2014 Location: Richmond Hill, GA Posts: 119	Re: Show your current set up and how you got there or where its goin. Brad that blower is sick!

Register or Log In To remove these advertisements.