The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-02-2014, 06:40 PM   #1
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 882
Turn Signal & Headlight Problem

I have a '70 that is having some light issues.

The turn signals don't work completely. You can see the light go in and out but it's a very small difference in light output. The headlights are also unequal, the passenger is a lot brighter and the driver is dim. Same goes for the other lights on the grill.

The side markers light up, but do the same blinking problem.

Would there be a benefit to just replacing all the fuses in the box or is this a problem in the harness by the headlights?
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is offline   Reply With Quote
Old 07-02-2014, 07:06 PM   #2
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,638
Re: Turn Signal & Headlight Problem

-
You need to do this....

http://67-72chevytrucks.com/vboard/s....php?p=4200642

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Old 07-02-2014, 07:16 PM   #3
cdowns
Senior Member
 
cdowns's Avatar
 
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
Re: Turn Signal & Headlight Problem

cleaning all the connections helps alot as far as havin the juice flow and causeing the lights to b bright
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane

MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF

DONT BELIEVE EVERYTHING YOU THINK

TAKE MY ADVISE;I DON'T USE IT ANYWAY
cdowns is offline   Reply With Quote
Old 07-02-2014, 11:59 PM   #4
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 882
Re: Turn Signal & Headlight Problem

Quote:
Originally Posted by LockDoc View Post
What will that do with respect to the headlights? Just curious. Still learning, first truck.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is offline   Reply With Quote
Old 07-03-2014, 12:00 AM   #5
KyleSeal
Senior Member
 
KyleSeal's Avatar
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 882
Re: Turn Signal & Headlight Problem

Quote:
Originally Posted by cdowns View Post
cleaning all the connections helps alot as far as havin the juice flow and causeing the lights to b bright
We cleaned the connectors to the headlight with dielectric. When we 'wiggle' the connector it goes from bright to dim.
__________________
"Sometimes I do serve as a good bad example. Glad to be of service."

My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809
KyleSeal is offline   Reply With Quote
Old 07-03-2014, 12:35 AM   #6
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,638
Re: Turn Signal & Headlight Problem

Quote:
Originally Posted by KyleSeal View Post
What will that do with respect to the headlights? Just curious. Still learning, first truck.
Quote:
Originally Posted by KyleSeal View Post
We cleaned the connectors to the headlight with dielectric. When we 'wiggle' the connector it goes from bright to dim.
Grounds make a difference with everything. The cab and radiator core support sit on rubber bushings so they will not ground correctly without ground straps. That is also why you need a ground strap from the engine to the frame. The engine and transmission mounts are rubber cushions that isolate them from the frame....

If you are talking about dielectric grease it is not a cleaner. If you mean contact cleaner you still have to clean the mating contacts with a small flat file or fine sandpaper to get any corrosion off.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Reply

Bookmarks

Tags
1970, c10, headlights, lighting, wiring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com