LS swap engine mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ocho702 · 07-16-2014, 04:38 PM

What are some good engine mounts for a 1967 gmc truck that will have a 5.3 LS engine?

chasinhiway · 07-16-2014, 04:41 PM

I used dirty dingo and really like them. You can find tons of info in the LS swap section.

kamikazekyle05 · 07-17-2014, 10:02 AM

im using ece on mine

**truckdude239** · 07-17-2014, 10:09 AM

I used dirty dingo mounts and the stock engine mount http://dirtydingo.com/store/index.ph...5_322&CDpath=8

Matt Cramer · 07-17-2014, 11:20 AM

I cut a set out of 1/4" steel strip with a chop saw and drill press. Details here:

http://www.diyautotune.com/tech_arti...t_adapters.htm

I've put up a set of downloadable PDF templates if you want to copy them. Note that the version I used required cutting and welding the stock frame stands, a trade-off to allow using a stock A/C compressor down the road.

07-16-2014, 04:38 PM	#1
Ocho702 Registered User Join Date: Nov 2013 Location: Las Vegas nevada Posts: 5	LS swap engine mounts What are some good engine mounts for a 1967 gmc truck that will have a 5.3 LS engine?

07-16-2014, 04:41 PM	#2
chasinhiway Registered User Join Date: Apr 2010 Location: pontotoc, ms Posts: 113	Re: LS swap engine mounts I used dirty dingo and really like them. You can find tons of info in the LS swap section. __________________ LOWER IT AND DRIVE IT Sally's thread http://67-72chevytrucks.com/vboard/s...d.php?t=563266

07-17-2014, 10:02 AM	#3
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: LS swap engine mounts im using ece on mine

07-17-2014, 10:09 AM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,236	Re: LS swap engine mounts I used dirty dingo mounts and the stock engine mount http://dirtydingo.com/store/index.ph...5_322&CDpath=8 __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

07-17-2014, 11:20 AM	#5
Matt Cramer Registered User Join Date: Apr 2012 Location: Covington, GA Posts: 386	Re: LS swap engine mounts I cut a set out of 1/4" steel strip with a chop saw and drill press. Details here: http://www.diyautotune.com/tech_arti...t_adapters.htm I've put up a set of downloadable PDF templates if you want to copy them. Note that the version I used required cutting and welding the stock frame stands, a trade-off to allow using a stock A/C compressor down the road. __________________ Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.