The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-21-2014, 10:10 PM   #1
mroho
Registered User
 
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

Hello All!

I'm just in the process of installing a CPP C-Notch Kit on my 1966 Chevy Short Box. I have the old suspension removed and I was just getting a template ready to start the cutting. During this process, I notice that my traction bar mount is in the way on the driver side. The instructions or the research I have done online have not mentioned this to be a problem. I have attached some pictures of the area. Based on what I could see online, my traction bar mount along the frame and near the differential doesn't look normal. Is my frame a typical frame for a 64-66 short box?

I am guessing that I am going to have to notch the back end of my c-notch kit out to fit around the mount? Or does anyone have any other suggestions? I'm thinking that the two rivets that I need to grind off to attach the c-notch kit to are in the right spot.

Thanks in advance.
Mike
Attached Images
     

Last edited by mroho; 07-21-2014 at 10:21 PM. Reason: Missed information.
mroho is offline   Reply With Quote
Old 07-21-2014, 10:11 PM   #2
mroho
Registered User
 
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

More pictures
Attached Images
     
mroho is offline   Reply With Quote
Old 07-21-2014, 10:17 PM   #3
Fleetside63
Registered User
 
Join Date: Jul 2014
Location: Pittsburgh, Pennsylvania
Posts: 17
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

this happened to me also...CPP was no help. I just did some trimming, you'll be fine. Look at the pics in my post and you will see where I cut out.
Fleetside63 is offline   Reply With Quote
Old 07-21-2014, 10:20 PM   #4
Fleetside63
Registered User
 
Join Date: Jul 2014
Location: Pittsburgh, Pennsylvania
Posts: 17
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

don't be afraid to trim it. The 2 rivets in the panhard bar mount will be a pain and I ended up fitting the notch between the 2 which took some convincing. I welded mine up after since I wasn't comfortable with the bolt alignment. Hope this helps, anymore questions ask away man.


Marc
Attached Images
   
Fleetside63 is offline   Reply With Quote
Old 07-21-2014, 10:27 PM   #5
chevyrestoguy
Registered User
 
chevyrestoguy's Avatar
 
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

I had to trim my CCP notch as well, and I wound up welding the perimeter, too.
__________________
Check out my latest endeavor:
https://roundsixpod.com

My build threads:
'55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512

'64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527
chevyrestoguy is offline   Reply With Quote
Old 07-21-2014, 10:30 PM   #6
mroho
Registered User
 
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

That was quick, thanks Marc and Chevyrestoguy. Are our frames typical/normal? Does your mount near the differential look the same too?

My next step is to install the CPP rear disk conversion, after looking more at the mount near the differential, where my brake lines are plumbed, I'm thinking that the hard lines that they supplied will not align properly (the right brake line and the lines going to the master cylinder are under the mount, while the left brake line is on top).

Thanks again,
Mike
mroho is offline   Reply With Quote
Old 07-21-2014, 10:41 PM   #7
Fleetside63
Registered User
 
Join Date: Jul 2014
Location: Pittsburgh, Pennsylvania
Posts: 17
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

I have the same set-up with the rear end. I have never looked at the CPP rear disc install...but lines can be changed. I'm interested on how it works out.
Fleetside63 is offline   Reply With Quote
Old 07-28-2014, 05:34 PM   #8
mroho
Registered User
 
Join Date: Jan 2014
Location: Alberta, Canada
Posts: 37
Re: 1966 Chevy Short Box C-Notch Kit Install - Is My Frame Normal? Please Help!

Thanks Fleetside63. Will let you know how the brakes go.
mroho is offline   Reply With Quote
Reply

Bookmarks

Tags
c-notch, lowering, suspension, traction


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com