What clutch master-cylinder are you guys using for T56 trans

[conman585]

Originally Posted by conman585

I thought this install looked good.

http://www.customclassictrucks.com/t...s_for_the_c10/

The actual part number of the MC was listed in a preceding article.

http://www.customclassictrucks.com/t...t/viewall.html

"To actuate the hydraulic throwout bearing on our Tremec, we’ll be using a Wilwood ¾-inch bore master cylinder (260-10282) coupled with their new billet reservoir (260- 12696)."