262's 1970 GMC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ericjon262 · 10-05-2013, 09:02 PM

rebuilt the carb, fixed the choke, and an exhaust leak. then, I made a table of ECM connections for the 4200 ECM. I found out today that the oil pan rail on the 4200 is flat, which should make fabricating a pan much easier than I previously thought.

ericjon262 · 12-03-2013, 02:32 PM

Drove the truck a little over 1100 miles this last week, burnt a bunch of oil, but still managed 15.5 MPG, on part of the drive I managed 17.5 MPG! bear in mind though, my average speed was 50 MPH... I think that with the I6 fuel injected engine, and overdrive (w/lockup converter) transmission, I should be able to net about 22 MPG hwy at 70 MPH.

ericjon262 · 07-01-2014, 11:29 PM

Hello, my name is Eric, and I have a problem...

lol...

I bought a second 70 GMC, this one is a 3/4 ton though. It's got a strong running 400 SBC, 700r4, dana 60 (full floating!) power brakes, a/c, a nice bench seat, and lots of other **** I needed for my 1/2 ton. the body on this one is toast though, full of holes, beyond repair, so the plan is to swap all the good parts from this truck to the 1/2 ton.

on another note, if anyone in the southeast is looking for 5 lug disk brake parts, I'll be selling my soon, either with the parts truck, or separate. not sure yet...

ericjon262 · 07-26-2014, 05:09 PM

Started swapping the cabs, here are the progress pics from the past 2 days.

hugger6933 · 07-26-2014, 05:36 PM

Those two plugs on the firewall were timing plugs something to do with the early emissions stuff it was new for the 70 350. My 70's both had them. Nice 4 eyes! Love the GMC's! Jim

ericjon262 · 07-26-2014, 05:49 PM

Quote:

Originally Posted by hugger6933

Those two plugs on the firewall were timing plugs something to do with the early emissions stuff it was new for the 70 350. My 70's both had them. Nice 4 eyes! Love the GMC's! Jim

thanks, it'll be one nice one and one damn near scrapyard condition when I'm done, I plan to sell the 1/2 ton as a parts truck with a title once this phase is complete.

ericjon262 · 07-26-2014, 06:25 PM

also found this little gem on my dads farm, matches my truck and county!

mx289 · 07-26-2014, 08:29 PM

Cool build.

Good find on the plates.

ericjon262 · 07-27-2014, 07:06 PM

Note the holes...

soldered them up.

and now it's paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand....

ericjon262 · 08-20-2014, 09:24 PM

working on a set of custom engine stands for the atlas swap...

first design looked good, but very flawed dimensionaly.

Second design looked better, but still had issues.

hopefully 3rd time is a charm. (not done yet...)

ericjon262 · 08-21-2014, 10:30 PM

Little more progress...

I have also found someone who can cut them out for me.

ericjon262 · 08-22-2014, 12:47 PM

about to start on the crossmember.

ericjon262 · 08-23-2014, 12:33 AM

Done?

10-05-2013, 09:02 PM	#26
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC rebuilt the carb, fixed the choke, and an exhaust leak. then, I made a table of ECM connections for the 4200 ECM. I found out today that the oil pan rail on the 4200 is flat, which should make fabricating a pan much easier than I previously thought. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

12-03-2013, 02:32 PM	#27
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Drove the truck a little over 1100 miles this last week, burnt a bunch of oil, but still managed 15.5 MPG, on part of the drive I managed 17.5 MPG! bear in mind though, my average speed was 50 MPH... I think that with the I6 fuel injected engine, and overdrive (w/lockup converter) transmission, I should be able to net about 22 MPG hwy at 70 MPH. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

07-01-2014, 11:29 PM	#28
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Hello, my name is Eric, and I have a problem... lol... I bought a second 70 GMC, this one is a 3/4 ton though. It's got a strong running 400 SBC, 700r4, dana 60 (full floating!) power brakes, a/c, a nice bench seat, and lots of other **** I needed for my 1/2 ton. the body on this one is toast though, full of holes, beyond repair, so the plan is to swap all the good parts from this truck to the 1/2 ton. on another note, if anyone in the southeast is looking for 5 lug disk brake parts, I'll be selling my soon, either with the parts truck, or separate. not sure yet... __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

07-26-2014, 05:09 PM	#29
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Started swapping the cabs, here are the progress pics from the past 2 days. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

07-26-2014, 05:36 PM	#30
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,269	Re: 262's 1970 GMC Those two plugs on the firewall were timing plugs something to do with the early emissions stuff it was new for the 70 350. My 70's both had them. Nice 4 eyes! Love the GMC's! Jim

07-26-2014, 06:25 PM	#32
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC also found this little gem on my dads farm, matches my truck and county! __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

07-26-2014, 08:29 PM	#33
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: 262's 1970 GMC Cool build. Good find on the plates. __________________ Tom 71 K2500 71 K5 Jimmy

07-27-2014, 07:06 PM	#34
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Note the holes... soldered them up. and now it's paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand, paint and sand.... __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

08-20-2014, 09:24 PM	#35
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC working on a set of custom engine stands for the atlas swap... first design looked good, but very flawed dimensionaly. Second design looked better, but still had issues. hopefully 3rd time is a charm. (not done yet...) __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

08-21-2014, 10:30 PM	#36
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Little more progress... I have also found someone who can cut them out for me. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

08-22-2014, 12:47 PM	#37
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC about to start on the crossmember. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.

08-23-2014, 12:33 AM	#38
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: 262's 1970 GMC Done? __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.