AR Part Out/Sell Whole, 67 c10 2wd long rough shape - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 08-25-2014, 09:23 PM

I picked up a 67 c10 2wd with a very rough body. Grabbed a few parts for my dads truck, not much I could use on mine. It has to be gone by Oct 1st. I work during the day, so picture taking and parts pulling will be in the evening.

1. Since the body is so bad other than the cab, I'm going to offer patches of fenders. It is a steel floor bed, but is quite bad. Not sure I can get a good patch, will have to look closer.
2. :edit: cab is sold.
3. I need to keep this a rolling chassis as long as possible. If you need suspension parts, I can do that at the very end.

I also have a pile of other parts from past situations, they are forsale as well. Parts are located in 72120, and would like to try and ship "if it fits it ships" as much as possible.

Still here and good....

engine last ran in 2002, said it ran good
3speed trans, said they had it rebuilt at some point

air cleaner (in accessory pic)
seat frame is here

Parts I know are bad/gone.....
headlight bezels
park lights
backup lenses
cluster
grill shell
1 grill ring
front bumper
door handles/cranks
door panels(1missing, 1 damaged)
all body panels have some sort of damage.
cab
rear springs
carb
gm goodwrench VC's in misc parts picture gone.

flashed · 08-25-2014, 09:35 PM

How much for the one lonely hubcap shipped to Ga 30114 ?

Dale99 · 08-25-2014, 09:38 PM

It has some dents, could likely be hammered out. If it will fit in the medium box, I would do 20 to your door.

**michael bustamante** · 08-25-2014, 09:39 PM

interested in the window crank handles if those are still there as well as the dash knobs if they are the deluxe. and how is that passenger fender?

Dale99 · 08-25-2014, 09:45 PM

window/crank handles were broken or used on my dads truck.
not sure which knobs are deluxe, can you post a pic of what your looking for? (edit

these knobs are solid black, I don't think that's deluxe??
pass fender has typical rust front and rear, plus dents along front edge

muckmuck · 08-25-2014, 09:50 PM

Is that a sport mirror backing plate mixed in with the other parts? If so, I'm interested in a price shipped to 89044.

**michael bustamante** · 08-25-2014, 09:50 PM

Surface rust or eaten thru and pitted?
Also the deluxe knobs will have the srainless center and ridges along the edge like a quarter. I know i need more. Ill have to go look at my truck

Dale99 · 08-25-2014, 09:54 PM

muckmuck, yes you are correct. It is heavily rust/pitted but still quite solid. I would do 8 to your door in small usps box.

Michael, full eaten thru front and rear lower. That is not the knobs I have, sorry.

Dale99 · 08-25-2014, 09:58 PM

muckmuck.. Is this also the correct side you need?

muckmuck · 08-25-2014, 10:00 PM

Quote:

Originally Posted by Dale99

muckmuck.. Is this also the correct side you need?

I actually need both sides but that looks a little rough. I may need to pass for now...

Dale99 · 08-25-2014, 10:02 PM

Michael....

Dale99 · 08-25-2014, 10:03 PM

Quote:

Originally Posted by muckmuck

I actually need both sides but that looks a little rough. I may need to pass for now...

Understand, thanks for looking!

Maddoxdb · 08-25-2014, 10:48 PM

Price for carburetor and complete fuel line from carb to fuel pump shipped to 73644 please. Thanks, Dustin

bertvert72 · 08-25-2014, 11:12 PM

how much for the electric fan ?

**ScottH** · 08-25-2014, 11:53 PM

Need a 6 cyl upper alternator bracket. If u have one how much shipped to 08753?

Thanks

**michael bustamante** · 08-26-2014, 12:35 AM

Dang i was hoping the cup would be good on the fender. Thank you though.

UP GRADE · 08-26-2014, 02:16 AM

How much for the ignition bezel?

Dale99 · 08-26-2014, 07:05 AM

maddoxdb. The hard fuel line stops slightly before the pump and turns into rubber. Is that correct?

bertvert. I was thinking 20plus ride. It is 12" summit brand, flows 1100cfm.

scott, should still be there. Will verify tonight.

Michael, thanks for looking.

upgrade, a few dollars plus ride. Will get better pics tonight for you.

Maddoxdb · 08-26-2014, 08:48 AM

Quote:

Originally Posted by Dale99

maddoxdb. The hard fuel line stops slightly before the pump and turns into rubber. Is that correct?

bertvert. I was thinking 20plus ride. It is 12" summit brand, flows 1100cfm.

scott, should still be there. Will verify tonight.

Michael, thanks for looking.

upgrade, a few dollars plus ride. Will get better pics tonight for you.

I believe that is correct but after thinking on it I think I just need the carb. That should cheapen shipping up a bit too. Thanks, Dustin

waylonbud · 08-26-2014, 12:46 PM

What is your price on the cab with the doors. Doors dont need to be complete but I would like the outer door handles.
Thanks.

UP GRADE · 08-26-2014, 02:01 PM

Ok thanks.

59bones · 08-26-2014, 02:38 PM

Looks like a 292. I am interested in the head. Any idea when the last time this thing ran? Please provide a price with shipping to 60109.

Thanks for your time.

Dale99 · 08-26-2014, 06:28 PM

Waylon bud... cab, cab windows, doors, door windows, outer handles, crank assy, steering column, glove box, title, BOS. I will do 150 you come get it. 250 will get the the whole truck minus rims and gas tank.

59bones. I'm not sure how to tell engine size on I6. Where is it and I will verify engine size before I pull the head. Last ran 2002.

About to pull parts/take pics of all other stuff.

waylonbud · 08-26-2014, 06:55 PM

Hi Dale,
I will take the cab for $150 for sure. Do you need $ to hold til I pick up or how do you want to do it? I work almost every Sat. and it will take me 8-9 hrs to get to Little Rock. Wish I had better flexibility with work, but usually Sun is all I have. I guess I could complain about not being able to buy parts, Haha.

waylonbud · 08-26-2014, 06:56 PM

Hi Dale,
I will take the cab for $150 for sure. Do you need $ to hold til I pick up or how do you want to do it? I work almost every Sat. and it will take me 8-9 hrs to get to Little Rock. Wish I had better flexibility with work, but usually Sun is all I have. I guess I could complain about not being able to buy parts, Haha.

08-25-2014, 09:23 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Part Out/Sell Whole, 67 c10 2wd long rough shape I picked up a 67 c10 2wd with a very rough body. Grabbed a few parts for my dads truck, not much I could use on mine. It has to be gone by Oct 1st. I work during the day, so picture taking and parts pulling will be in the evening. 1. Since the body is so bad other than the cab, I'm going to offer patches of fenders. It is a steel floor bed, but is quite bad. Not sure I can get a good patch, will have to look closer. 2. :edit: cab is sold. 3. I need to keep this a rolling chassis as long as possible. If you need suspension parts, I can do that at the very end. I also have a pile of other parts from past situations, they are forsale as well. Parts are located in 72120, and would like to try and ship "if it fits it ships" as much as possible. Still here and good.... engine last ran in 2002, said it ran good 3speed trans, said they had it rebuilt at some point air cleaner (in accessory pic) seat frame is here Parts I know are bad/gone..... headlight bezels park lights backup lenses cluster grill shell 1 grill ring front bumper door handles/cranks door panels(1missing, 1 damaged) all body panels have some sort of damage. cab rear springs carb gm goodwrench VC's in misc parts picture gone. Attached Images __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck) Last edited by Dale99; 09-07-2014 at 07:48 PM.

08-25-2014, 09:35 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape How much for the one lonely hubcap shipped to Ga 30114 ?

08-25-2014, 09:38 PM	#3
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape It has some dents, could likely be hammered out. If it will fit in the medium box, I would do 20 to your door.

08-25-2014, 09:39 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape interested in the window crank handles if those are still there as well as the dash knobs if they are the deluxe. and how is that passenger fender? __________________ 1967custom

08-25-2014, 09:45 PM	#5
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape window/crank handles were broken or used on my dads truck. not sure which knobs are deluxe, can you post a pic of what your looking for? (edit these knobs are solid black, I don't think that's deluxe?? pass fender has typical rust front and rear, plus dents along front edge

08-25-2014, 09:50 PM	#6
muckmuck Junior Member Join Date: Apr 2005 Location: Henderson, NV Posts: 329	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Is that a sport mirror backing plate mixed in with the other parts? If so, I'm interested in a price shipped to 89044.

08-25-2014, 09:54 PM	#8
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape muckmuck, yes you are correct. It is heavily rust/pitted but still quite solid. I would do 8 to your door in small usps box. Michael, full eaten thru front and rear lower. That is not the knobs I have, sorry.

08-25-2014, 09:58 PM	#9
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape muckmuck.. Is this also the correct side you need? Attached Images

08-25-2014, 10:02 PM	#11
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Michael.... Attached Images

08-25-2014, 10:48 PM	#13
Maddoxdb Registered User Join Date: Jun 2011 Location: Elk city ok Posts: 891	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Price for carburetor and complete fuel line from carb to fuel pump shipped to 73644 please. Thanks, Dustin

08-25-2014, 11:12 PM	#14
bertvert72 Registered User Join Date: Dec 2009 Location: Dickson,Tn Posts: 216	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape how much for the electric fan ? __________________ Bret Here's a link to my build http://67-72chevytrucks.com/vboard/s...d.php?t=577889

08-25-2014, 11:53 PM	#15
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Need a 6 cyl upper alternator bracket. If u have one how much shipped to 08753? Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-26-2014, 12:35 AM	#16
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Dang i was hoping the cup would be good on the fender. Thank you though. __________________ 1967custom

08-26-2014, 02:16 AM	#17
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape How much for the ignition bezel?

08-26-2014, 07:05 AM	#18
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape maddoxdb. The hard fuel line stops slightly before the pump and turns into rubber. Is that correct? bertvert. I was thinking 20plus ride. It is 12" summit brand, flows 1100cfm. scott, should still be there. Will verify tonight. Michael, thanks for looking. upgrade, a few dollars plus ride. Will get better pics tonight for you.



Register or Log In To remove these advertisements.

08-26-2014, 12:46 PM	#20
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape What is your price on the cab with the doors. Doors dont need to be complete but I would like the outer door handles. Thanks.

08-26-2014, 02:01 PM	#21
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Ok thanks.

08-26-2014, 02:38 PM	#22
59bones Registered User Join Date: Sep 2011 Location: Elgin Illinois Posts: 143	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Looks like a 292. I am interested in the head. Any idea when the last time this thing ran? Please provide a price with shipping to 60109. Thanks for your time.

08-26-2014, 06:28 PM	#23
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Waylon bud... cab, cab windows, doors, door windows, outer handles, crank assy, steering column, glove box, title, BOS. I will do 150 you come get it. 250 will get the the whole truck minus rims and gas tank. 59bones. I'm not sure how to tell engine size on I6. Where is it and I will verify engine size before I pull the head. Last ran 2002. About to pull parts/take pics of all other stuff.

08-26-2014, 06:55 PM	#24
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Hi Dale, I will take the cab for $150 for sure. Do you need $ to hold til I pick up or how do you want to do it? I work almost every Sat. and it will take me 8-9 hrs to get to Little Rock. Wish I had better flexibility with work, but usually Sun is all I have. I guess I could complain about not being able to buy parts, Haha.

08-26-2014, 06:56 PM	#25
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Part Out/Sell Whole, 67 c10 2wd long rough shape Hi Dale, I will take the cab for $150 for sure. Do you need $ to hold til I pick up or how do you want to do it? I work almost every Sat. and it will take me 8-9 hrs to get to Little Rock. Wish I had better flexibility with work, but usually Sun is all I have. I guess I could complain about not being able to buy parts, Haha.

Register or Log In To remove these advertisements.