TRW vs. MOOG - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WILLNIK · 01-16-2004, 04:59 PM

I am getting ready to order my suspension parts and need some input. Should I go Moog or TRW? Thanks, Terry

imdarren · 01-16-2004, 06:36 PM

Good question.
I too would like to see some comment.

Darren

**old Rusty C10** · 01-16-2004, 06:38 PM

ive always used moog never trw but that was because i found them first and have yet to have any probelms with em so i stuck with what worked

mocwon · 01-16-2004, 06:40 PM

Most will say Moog. I've used both with problems from either. I would not buy any other brand though.

mocwon · 01-16-2004, 06:41 PM

If I could type.... I meant with NO problems from either.

Oborny71 · 01-16-2004, 06:42 PM

i've used both and had good luck, but i always liked moog a little more.

cableguy0 · 01-16-2004, 08:35 PM

moog all the way but moog makes a lot of other companies stuff. falconer is made by moog as well as a few others and they are cheaper for the same exact part just in a different box

*rage'nrat638* · 01-16-2004, 09:00 PM

moog does not make trw stuff!!!!!!
i have always liked MOOG BETTER MY SELF

TRY HERE
GREAT PRICES....don't even have to get-up....
except to answer the door

http://www.rockauto.com/

*1972C10* · 01-16-2004, 09:17 PM

Might be thinking about trw and timmiken.

cableguy0 · 01-16-2004, 09:43 PM

just to clear this up i wasnt saying moog made trw i said moog makes stuff for a lot of companies and reboxes them.

TODDS 72 · 01-16-2004, 10:00 PM

napa and carquest suspension parts are moog,just boxed with there companys name on the box.moog also make many parts for oems,and works with the big three.i just had a moog rep at my shop 2 weeks ago.trw is good also.
I also as of late have been useing acdelco,there ball joints are the cats ass,no preassembly outta the box and in they go,and priced about the same as moog.

mocwon · 01-16-2004, 10:05 PM

Who said they did?

*rage'nrat638* · 01-16-2004, 10:09 PM

Quote:

Originally posted by mocwon
Who said they did?

not me or any body for that matter

CliffB · 01-16-2004, 10:14 PM

I bought every part except steering for my 72 C20 front end a few years ago and used all Moog. Did it in the driveway. No problems then or since. Haven't used TRW. Another truck guy I trust suggested Moog as lowest risk, best quality. He'd had bad luck with other parts that cost less, particularly ball joints that went bad way sooner than they should have. I bought all my stuff from expressautoparts.com back then because it saved me about 35-40% over best prices I could find locally. I still have all the Moog part numbers I used if you need them.

**passthebuck** · 01-16-2004, 10:15 PM

moog for me wore out WAY too quickly - now I'm strictly a DANA-Spicer kinda guy now - IF I can find a dealer (they're tough to find)

CliffB · 01-16-2004, 10:20 PM

P.S. I spent four winters in Syracuse at S.U. Don't remember where your town is but I didn't get out of town a lot going to school there. Sending northern California sunshine (when we get some). Can't say I miss clearing what I remember as 160 average inches of snow but I really miss driving in it. Now that was fun! I'm serious! Enjoy your trucks.

doughby82 · 01-17-2004, 12:00 AM

i used trw parts cause they had them in stock.moog i had to order .no complaints

Cat Fuzz · 01-17-2004, 03:53 AM

Moog is far superior to TRW. I can't remember why though (been out of the auto parts biz for 9 years now.) Something about plastic somethings in the TRW parts. I just know that when the warehouse I worked at switched toMoog from TRW we had alot less of the Moog coming back on warrenty.

GMCGRANDS · 01-17-2004, 07:27 PM

Moog . Tie rod ends are bigger.

gonebad2 · 01-17-2004, 07:42 PM

I've used both in the past. Seems like there is always a cotterpin or nut missing when you pull them out of the box. As far as which brand is superior....You got me. I always sell the vehicle before they have a chance to get worn out.

mooneyes · 01-17-2004, 10:41 PM

....my dad had a TRW tie rod end fall off, 3 weeks after we checked out the whole front end.. luckily he never hit the brakes until he was completly stopped...could have been one bad one in a million but used moog ever since

**MJN** · 01-18-2004, 12:27 AM

Just bought all four Moog Balljoints for the Blazer. Have had really good luck with them before too. Never used TRW before though. Moog seem to be bigger and they're made in the U.S.

WILLNIK · 01-19-2004, 06:11 PM

THANKS for all the replies! Terry

slam33 · 01-19-2004, 08:04 PM

I have seen listings that say Moog makes Carquest but they make them to a different spec. In the pic there is a Moog tie rod and a Carquest tie rod. The Moog has the larger bearing head. As for TRW they make a good part but Moog parkerizes there parts which seem to make them last longer.

dropped_71chevy · 01-19-2004, 09:57 PM

Quote:

Originally posted by slam33
but Moog parkerizes there parts which seem to make them last longer.

what does parkerizes mean?

01-16-2004, 04:59 PM	#1
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	TRW vs. MOOG I am getting ready to order my suspension parts and need some input. Should I go Moog or TRW? Thanks, Terry __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)

01-16-2004, 06:36 PM	#2
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Good question. I too would like to see some comment. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-16-2004, 06:38 PM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,293	ive always used moog never trw but that was because i found them first and have yet to have any probelms with em so i stuck with what worked __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-16-2004, 06:40 PM	#4
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Most will say Moog. I've used both with problems from either. I would not buy any other brand though. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

01-16-2004, 06:41 PM	#5
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	If I could type.... I meant with NO problems from either. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

01-16-2004, 06:42 PM	#6
Oborny71 Registered User Join Date: Apr 2001 Location: Lincoln, Nebraska Posts: 587	i've used both and had good luck, but i always liked moog a little more. __________________ 67 Chevy SWB - goal of a 1,000 hp weekend cruiser

01-16-2004, 08:35 PM	#7
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	moog all the way but moog makes a lot of other companies stuff. falconer is made by moog as well as a few others and they are cheaper for the same exact part just in a different box __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

01-16-2004, 09:00 PM	#8
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	moog does not make trw stuff!!!!!! i have always liked MOOG BETTER MY SELF TRY HERE GREAT PRICES....don't even have to get-up.... except to answer the door http://www.rockauto.com/ Last edited by rage'nrat638; 01-16-2004 at 09:34 PM.

01-16-2004, 09:17 PM	#9
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Might be thinking about trw and timmiken.

01-16-2004, 09:43 PM	#10
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	just to clear this up i wasnt saying moog made trw i said moog makes stuff for a lot of companies and reboxes them. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

01-16-2004, 10:00 PM	#11
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	napa and carquest suspension parts are moog,just boxed with there companys name on the box.moog also make many parts for oems,and works with the big three.i just had a moog rep at my shop 2 weeks ago.trw is good also. I also as of late have been useing acdelco,there ball joints are the cats ass,no preassembly outta the box and in they go,and priced about the same as moog. __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown Last edited by TODDS 72; 01-16-2004 at 10:03 PM.

01-16-2004, 10:05 PM	#12
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	moog does not make trw stuff!!!!!! Who said they did? __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

01-16-2004, 10:14 PM	#14
CliffB Registered User Join Date: Dec 2003 Location: San Leandro, CA Posts: 83	I bought every part except steering for my 72 C20 front end a few years ago and used all Moog. Did it in the driveway. No problems then or since. Haven't used TRW. Another truck guy I trust suggested Moog as lowest risk, best quality. He'd had bad luck with other parts that cost less, particularly ball joints that went bad way sooner than they should have. I bought all my stuff from expressautoparts.com back then because it saved me about 35-40% over best prices I could find locally. I still have all the Moog part numbers I used if you need them. __________________ 72 C20 3/4 Custom Camper 94 Roadmaster Estate Wagon

01-16-2004, 10:15 PM	#15
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	moog for me wore out WAY too quickly - now I'm strictly a DANA-Spicer kinda guy now - IF I can find a dealer (they're tough to find) __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

01-16-2004, 10:20 PM	#16
CliffB Registered User Join Date: Dec 2003 Location: San Leandro, CA Posts: 83	P.S. I spent four winters in Syracuse at S.U. Don't remember where your town is but I didn't get out of town a lot going to school there. Sending northern California sunshine (when we get some). Can't say I miss clearing what I remember as 160 average inches of snow but I really miss driving in it. Now that was fun! I'm serious! Enjoy your trucks. __________________ 72 C20 3/4 Custom Camper 94 Roadmaster Estate Wagon



Register or Log In To remove these advertisements.

01-17-2004, 12:00 AM	#17
doughby82 Registered User Join Date: Mar 2001 Location: springfield ill Posts: 836	i used trw parts cause they had them in stock.moog i had to order .no complaints __________________ springfield illinois 2003 custom (harley)built from scratch 68 swb Last edited by doughby82; 01-20-2004 at 01:16 AM.

01-17-2004, 03:53 AM	#18
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	Moog is far superior to TRW. I can't remember why though (been out of the auto parts biz for 9 years now.) Something about plastic somethings in the TRW parts. I just know that when the warehouse I worked at switched toMoog from TRW we had alot less of the Moog coming back on warrenty.

01-17-2004, 07:27 PM	#19
GMCGRANDS Registered User Join Date: Jan 2001 Location: Franklin , N.C. USA Posts: 105	Moog . Tie rod ends are bigger. __________________ Mark 72'GMC Sierra Grande 2wd SWB, Fatman stageV IFS, 6.0 liter LQ4 Gen 3 and 4L80E under construction 05' GMC Sierra Denali LQ9

01-17-2004, 07:42 PM	#20
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	I've used both in the past. Seems like there is always a cotterpin or nut missing when you pull them out of the box. As far as which brand is superior....You got me. I always sell the vehicle before they have a chance to get worn out. __________________ Your Bought And Sold....I Got Your Soul!

01-17-2004, 10:41 PM	#21
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	....my dad had a TRW tie rod end fall off, 3 weeks after we checked out the whole front end.. luckily he never hit the brakes until he was completly stopped...could have been one bad one in a million but used moog ever since __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

01-18-2004, 12:27 AM	#22
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 3,014	Just bought all four Moog Balljoints for the Blazer. Have had really good luck with them before too. Never used TRW before though. Moog seem to be bigger and they're made in the U.S. __________________ '51 South Bend Model "9A" '56 Chevy 3600 NAPCO '74 Chevy Cheyenne Super K20-restored on 37's '72 GMC Sierra Custom K2500- in progress '08 GMC Envoy Denali '12 GMC Sierra 2500HD Denali '17 GMC Yukon XL VCCA member #58596 http://www.nohrco.com

01-19-2004, 06:11 PM	#23
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	THANKS for all the replies! Terry __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)

01-19-2004, 08:04 PM	#24
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	I have seen listings that say Moog makes Carquest but they make them to a different spec. In the pic there is a Moog tie rod and a Carquest tie rod. The Moog has the larger bearing head. As for TRW they make a good part but Moog parkerizes there parts which seem to make them last longer. Attached Images __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

Register or Log In To remove these advertisements.