The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-08-2014, 02:14 AM   #15
kitsbeach
Senior Member
 
kitsbeach's Avatar
 
Join Date: May 2014
Location: Vancouver, BC
Posts: 555
Re: reverse lights wont stay on unless i wiggle the shifter

Quote:
Originally Posted by zosoppp View Post
The reverse switch for TotT shifters is on top of the column near the firewall (inside the cab, under the dash). there should be a dark green and light green wire. the dark green brings power from the fuse box (key on) and the light green is the switched wire to the lights on back.

All the tail light wiring (reverse, tail, brake/signals) go through the firewall behind the left head (on a V8) or behind the manifold side of a straight six. There is a plug/socket through the firewall and then that wire harness runs down to the left side frame rail, all the way to the rear cross member, where there's another plug/socket for the harness that goes into the rear of the bed to the lights themselves.
Thank you.!! This was the info I was looking for. I can see the harness as you described and get it now.
__________________
Kitsbeach (Ken)

1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills"

1980 C20 Long to short & static drop "Square One"
kitsbeach is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com