Let me see your stance!!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavymetl · 10-22-2014, 10:17 AM

ECE 4/6 Drop.

C-notched, with 1.5" lowering blocks in rear.

255/70/15 rear tire on 15x8 Wheel Vintiques smoothies.

c10Dream'n · 10-22-2014, 11:10 AM

Truck Year:'69

Lowered: ECE 4.5/6 kit with 1" lowering blocks for rear to make it a 4.5/7. CPP weld-in c-notch

Wheel Make/Model:American Racing TTII's

Front/Rear Wheel Size: 17x8

Tire Size: 255/55/17

pablo101 · 10-22-2014, 11:28 AM

71 stepper. ...ccp 4/5 drop kit

zamboni2354 · 10-22-2014, 11:30 AM

Truck Year: 1972
CPP drop kit. 5 inch drop springs in the rear and drop spindles and maybe the spring as well in the front. not sure what the drop in the front is.

15 inch rally wheels. I'd have to look to see what the front is but the rear tires are 275/60/15's

*Fitz* · 10-22-2014, 04:47 PM

Truck Year: 1967
Lowered/Lifted Front: drop 3.5 in
Lowered/Lifted Back: drop 5 in
Wheel Make/Model: Billet Specialties SLC 65
Front Wheel Size: 17 X 8
Rear Wheel Size: 17X10
Front Wheel Displacement: WTF? 255/60 R17
Rear Wheel Displacement: " 275/60 R1

Don't know what Wheel Displacement is. In a boat it's the volume of water displaced by the hull when the boat is at rated load. But this definitely isn't a boat!

Dropping the suspension and going up in wheel and tire size to 17's with 60 series sidewalls brings the hood and doors up to what might be a stock ride height but the tires will fill the wheel wells instead of the "truck on stilts" stock look. If you don't know these trucks and you don't know much about stockers you might just think that the truck is all show and no go....until I mash the gas. This baby goes, and I don't need nitrous.

Chuckin · 10-23-2014, 11:49 AM

Quote:

Originally Posted by Fitz

Don't know what Wheel Displacement is.

What is better known as "Offset".

Ozzy2013 · 10-30-2014, 05:26 PM

Quote:

Originally Posted by Fitz

Truck Year: 1967
Lowered/Lifted Front: drop 3.5 in
Lowered/Lifted Back: drop 5 in
Wheel Make/Model: Billet Specialties SLC 65
Front Wheel Size: 17 X 8
Rear Wheel Size: 17X10
Front Wheel Displacement: WTF? 255/60 R17
Rear Wheel Displacement: " 275/60 R1

Don't know what Wheel Displacement is. In a boat it's the volume of water displaced by the hull when the boat is at rated load. But this definitely isn't a boat!
Yea i bet it does haul ash!Ha ha
Dropping the suspension and going up in wheel and tire size to 17's with 60 series sidewalls brings the hood and doors up to what might be a stock ride height but the tires will fill the wheel wells instead of the "truck on stilts" stock look. If you don't know these trucks and you don't know much about stockers you might just think that the truck is all show and no go....until I mash the gas. This baby goes, and I don't need nitrous.

I bet it does gooooooo!

Chuckin · 11-04-2014, 05:59 PM

bump

Bozeforged Wheels · 10-22-2014, 05:41 PM

These are some nice looking trucks!

BugzC10 · 10-22-2014, 07:06 PM

Specs are in my signature...

yellow&white72 · 11-04-2014, 07:26 PM

5" in the front 6" in the back,

nicks diner · 10-22-2014, 07:22 PM

3 1/2 5 static thinking im gonna go down 1 more inch front and back, just waiting for all the body parts to be installed. After almost 2 years frame off she's coming home this week. By the way that's a 406 all roller with a 200 shot 11.1. Think I need bigger tires?

**davischevy** · 10-22-2014, 10:00 PM

Here's my Super. 2 1//2" spindles with 4" springs in the rear. 17X8 wheels with 0" offset.

juniorlp81 · 10-22-2014, 11:32 PM

Here's mine has 5.5 drop up front with 20's
Rear is on air with 22's no notch yet soon

**Already Gone** · 11-17-2014, 09:21 PM

Quote:

Originally Posted by davischevy

Here's my Super. 2 1//2" spindles with 4" springs in the rear. 17X8 wheels with 0" offset.

Would you have side shot of your truck to post and what size tires you running?

**Already Gone** · 11-17-2014, 09:31 PM

Quote:

Originally Posted by davischevy

Here's my Super. 2 1//2" spindles with 4" springs in the rear. 17X8 wheels with 0" offset.

Could you post a direct on sideshot of your truck and what size tires are you running? Beautiful Super by the way !!

MT29 · 10-28-2014, 05:03 PM

heres mine

Steve Hafner · 10-30-2014, 10:00 AM

. . . .

My 70 C-10

Original coil springs - front and rear.

Original helper springs in the rear.

Original NOS shocks.

15 inch original wheels.

. . . .

BossHogg69 · 11-05-2014, 12:05 AM

Quote:

Originally Posted by MT29

heres mine

that's a sweet stepper - what are the specs?

Chuckin · 11-17-2014, 05:53 PM

bump

70jnktrk · 11-17-2014, 06:27 PM

ece..4 1/2 ft...5 inch springs back...some blocking...15 x 8 ft wheels 15x10 rears...Wheel Vintiques wheels..forgot tire sizes and backspacing...

dell72 · 11-17-2014, 09:31 PM

1.5 coils cut off the front springs. Chevelle lowering springs rear. 235/70/15 front 285/70/15 rear

mcbassin · 10-30-2014, 11:21 AM

Here's Mine:
3.0" drop spindles in front
5.0" drop Springs in the rear
front tires-225/70/15 6-1/2" rallies
rear rear-275/60/15 8" rallies

Lattimer · 11-17-2014, 09:11 PM

Here is mine. 2" lowering springs in the front, 2" springs and 1" block in the back. 15x8 1980's 6 lug truck rallye's. 255/70R15 Cooper Cobra's. Its actually closer to sitting level than it looks in that pic.

**Already Gone** · 11-17-2014, 09:19 PM

Quote:

Originally Posted by Lattimer

Here is mine. 2" lowering springs in the front, 2" springs and 1" block in the back. 15x8 1980's 6 lug truck rallye's. 255/70R15 Cooper Cobra's. Its actually closer to sitting level than it looks in that pic.

Do you a sideways pic of your truck as I'd like to see how she sits from the side.

10-22-2014, 10:17 AM	#1
Heavymetl Registered User Join Date: Feb 2012 Location: Southern Ohio Posts: 292	Re: Let me see your stance!!! ECE 4/6 Drop. C-notched, with 1.5" lowering blocks in rear. 255/70/15 rear tire on 15x8 Wheel Vintiques smoothies.

10-22-2014, 11:10 AM	#2
c10Dream'n Registered User Join Date: Dec 2012 Location: San Diego Posts: 519	Re: Let me see your stance!!! Truck Year:'69 Lowered: ECE 4.5/6 kit with 1" lowering blocks for rear to make it a 4.5/7. CPP weld-in c-notch Wheel Make/Model:American Racing TTII's Front/Rear Wheel Size: 17x8 Tire Size: 255/55/17 Attached Images

10-22-2014, 11:28 AM	#3
pablo101 Registered User Join Date: May 2014 Location: Auburn Posts: 145	Re: Let me see your stance!!! 71 stepper. ...ccp 4/5 drop kit

10-22-2014, 11:30 AM	#4
zamboni2354 Registered User Join Date: Mar 2014 Location: Long Beach, CA. Posts: 289	Re: Let me see your stance!!! Truck Year: 1972 CPP drop kit. 5 inch drop springs in the rear and drop spindles and maybe the spring as well in the front. not sure what the drop in the front is. 15 inch rally wheels. I'd have to look to see what the front is but the rear tires are 275/60/15's

10-22-2014, 04:47 PM	#5
Fitz Account Suspended Join Date: Jan 2007 Location: Tucson Posts: 2,183	Re: Let me see your stance!!! Truck Year: 1967 Lowered/Lifted Front: drop 3.5 in Lowered/Lifted Back: drop 5 in Wheel Make/Model: Billet Specialties SLC 65 Front Wheel Size: 17 X 8 Rear Wheel Size: 17X10 Front Wheel Displacement: WTF? 255/60 R17 Rear Wheel Displacement: " 275/60 R1 Don't know what Wheel Displacement is. In a boat it's the volume of water displaced by the hull when the boat is at rated load. But this definitely isn't a boat! Dropping the suspension and going up in wheel and tire size to 17's with 60 series sidewalls brings the hood and doors up to what might be a stock ride height but the tires will fill the wheel wells instead of the "truck on stilts" stock look. If you don't know these trucks and you don't know much about stockers you might just think that the truck is all show and no go....until I mash the gas. This baby goes, and I don't need nitrous. Attached Images

11-04-2014, 05:59 PM	#8
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Re: Let me see your stance!!! bump __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread

10-22-2014, 05:41 PM	#9
Bozeforged Wheels Registered User Join Date: Aug 2014 Location: Laguna Hills, CA Posts: 23	Re: Let me see your stance!!! These are some nice looking trucks! __________________ Zak Bozeforged Wheels 1-866-634-4626 zak@bozeforged.com www.bozeforged.com www.facebook.com/bozealloys http://instagram.com/bozeforged

10-22-2014, 07:06 PM	#10
BugzC10 Registered User Join Date: Oct 2012 Location: Green Valley Arizona Posts: 1,351	Re: Let me see your stance!!! Specs are in my signature... __________________ 1970 C10 Short Stepper with 71/72 front clip.

11-04-2014, 07:26 PM	#11
yellow&white72 Registered User Join Date: Nov 2014 Location: Yukon, Oklahoma Posts: 35	Re: Let me see your stance!!! 5" in the front 6" in the back, Attached Images

10-22-2014, 07:22 PM	#12
nicks diner Registered User Join Date: Aug 2013 Location: Orlando fl Posts: 106	Re: Let me see your stance!!! 3 1/2 5 static thinking im gonna go down 1 more inch front and back, just waiting for all the body parts to be installed. After almost 2 years frame off she's coming home this week. By the way that's a 406 all roller with a 200 shot 11.1. Think I need bigger tires? Attached Images

10-22-2014, 10:00 PM	#13
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,815	Re: Let me see your stance!!! Here's my Super. 2 1//2" spindles with 4" springs in the rear. 17X8 wheels with 0" offset. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

10-22-2014, 11:32 PM	#14
juniorlp81 Registered User Join Date: Jan 2011 Location: Santa Barbara Posts: 26	Re: Let me see your stance!!! Here's mine has 5.5 drop up front with 20's Rear is on air with 22's no notch yet soon Attached Images __________________ Last edited by juniorlp81; 10-22-2014 at 11:40 PM.

10-28-2014, 05:03 PM	#17
MT29 Registered User Join Date: Sep 2009 Location: gboro nc Posts: 69	Re: Let me see your stance!!! heres mine Attached Images

10-30-2014, 10:00 AM	#18
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Let me see your stance!!! . . . . My 70 C-10 Original coil springs - front and rear. Original helper springs in the rear. Original NOS shocks. 15 inch original wheels. . . . . Attached Images __________________ . . . . Life is short . . . we only have, right now. . . . . My 70 C-10's BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=475526

11-17-2014, 05:53 PM	#20
Chuckin Registered User Join Date: Feb 2014 Location: Fresno, CA Posts: 33	Re: Let me see your stance!!! bump __________________ "Growing old is mandatory, Growing up is optional" Chuckin - 68 Build Thread



Register or Log In To remove these advertisements.

11-17-2014, 06:27 PM	#21
70jnktrk Registered User Join Date: Jan 2003 Location: arizona Posts: 213	Re: Let me see your stance!!! ece..4 1/2 ft...5 inch springs back...some blocking...15 x 8 ft wheels 15x10 rears...Wheel Vintiques wheels..forgot tire sizes and backspacing...

11-17-2014, 09:31 PM	#22
dell72 Registered User Join Date: Jul 2013 Location: Southern Wisconsin Posts: 126	Re: Let me see your stance!!! 1.5 coils cut off the front springs. Chevelle lowering springs rear. 235/70/15 front 285/70/15 rear Attached Images

10-30-2014, 11:21 AM	#23
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Let me see your stance!!! Here's Mine: 3.0" drop spindles in front 5.0" drop Springs in the rear front tires-225/70/15 6-1/2" rallies rear rear-275/60/15 8" rallies __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-17-2014, 09:11 PM	#24
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	Re: Let me see your stance!!! Here is mine. 2" lowering springs in the front, 2" springs and 1" block in the back. 15x8 1980's 6 lug truck rallye's. 255/70R15 Cooper Cobra's. Its actually closer to sitting level than it looks in that pic. __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881

Register or Log In To remove these advertisements.