|
12-19-2014, 08:10 PM
|
#1 |
|
Senior Member
 
Join Date: Mar 2014
Location: Toano, VA
Posts: 884
|
New Shock Problem
Just got my KYB Excel-G's in today and I tried to bolt them to the top shock mount just to have them in place once the other parts are here.
Well, I have a CPP relocation kit for the 5 inch drop I'm doing, and the bolt from the CPP kit is just a tad too big for the metal sleeve that goes in the bushing on the shock. What should I do? Without it, the shock is too loose, but with it the bolt wont go in at all. Also - do I need to break in the shocks in any specific way? Or just rocknroll?
__________________
"Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809 |
|
|
|
12-21-2014, 11:04 PM
|
#2 |
|
Registered User
Join Date: Jul 2012
Location: Anderson,SC
Posts: 953
|
Re: New Shock Problem
Sounds like all you need is a set of bolt sleeves with a larger inside diameter. Might be something they carry at your local parts store.
|
|
|
|
 |
| Bookmarks |
| Tags |
| 5 inch drop, cpp, problems, shocks |
|
|
Linear Mode
