OR 1971 K20 parts F/S

[bluek5]

Originally Posted by DLTruck1973

Paul, let me get to the shop on Monday and see what I can do to meet your needs. I have other e-brake parts other than these.

So all you need is the intermediate cable and all of the supports, frame brackets and couplers?

I will let you know on Monday.

Thank you for the interest,
Thomas

Thomas,
I need to crawl under the truck and look. I think that I only need the intermediate cable and whatever attachés it to the frame. I have the couplers.
Thanks, Paul

[DLTruck1973]

Originally Posted by bluek5

Thomas,
I need to crawl under the truck and look. I think that I only need the intermediate cable and whatever attachés it to the frame. I have the couplers.
Thanks, Paul

Sounds good Paul, just let me know.

Thank you,
Thomas

[bluek5]

Originally Posted by DLTruck1973

Sounds good Paul, just let me know.

Thank you,
Thomas

Thomas,
So in looking around I have come up with everything except the intermediate cable. If you have just a cable for a 3/4 ton 4x4 get me a price shipped to 84043.
Thanks, Paul

[lucky71gmc]

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

[DLTruck1973]

Originally Posted by lucky71gmc

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

I should have the 1/2 spring hanger for you but will have to check.

The inspection cover fits/mounts between the engine and transmission. It is under the truck and is half moon shaped.

I may have a automatic 4 x 4 high hump but need to check on that Monday is well.

I can let you know tomorrow what I have and prices.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by lucky71gmc

I have a 1972 chev 1/2 4 X 4 frame with a 1970 GMC cab and front clip off a two wheel drive, looking for a drivers side front spring hanger/ core support bracket. I don't know if the 3/4 4 X 4 is the correct part. Inspection cover is that the transmission tunnel? My drive train is the 350 transmission with a 205 transfer case. Looking for a medium to high hump tunnel. Currently the flat cab floor clears the automatic transmission, but I don't have my transfer case shifter lever installed due to no hole in the floor.

I do have a drivers side front spring mount with core support bracket for $40.00 plus shipping. I also have a automatic 4x4 floor hump for $75.00. I will have to pull it from a truck.

If you give me a zip code, I can get a shipping quote if interested.

Let me know,
Thank you,
Thomas

[Tdrcreyn4]

Was this a K20 disc brake truck and if so what do you have left of those parts with shipping to 30068

[DLTruck1973]

Originally Posted by Tdrcreyn4

Was this a K20 disc brake truck and if so what do you have left of those parts with shipping to 30068

Can you give me a breakdown of exactly what you need? Then I can give you itemized prices and a correct shipping quote.

Thank you for the interest,
Thomas

[Infanti]

Hi Thomas
Received shock brackets today. Better than I expected.
Thank you, Gerry

[DLTruck1973]

Originally Posted by Infanti

Hi Thomas
Received shock brackets today. Better than I expected.
Thank you, Gerry

Glad your are happy Gerry,

Thank you again and let me know if we can help you with anything in the future,
Thomas

[CUSTOM/10]

Tom;

I'm looking for a very nice pair of headlight buckets for a 72 chevy truck, do you have any ?

Gary

[DLTruck1973]

Originally Posted by CUSTOM/10

Tom;

I'm looking for a very nice pair of headlight buckets for a 72 chevy truck, do you have any ?

Gary

Hi Gary,

I have a set, left and right with the retainer rings. $10.00 each plus shipping.

These will be rust free and very clean.

Let me know,
Thank you,
Thomas

[CUSTOM/10]

Let me know what the total would be for both L & R shipped to NH 03873.

Gary

[teds72]

I will take the Engine harness (for manual trans) bad ends on starter and temp... 20.00 Under dash wiring harness 4sp/gauges very nice...65.00 manual shift column for $75.00 how much for shipping to Evansville IN 47720 Thanks Ted

[DLTruck1973]

Originally Posted by teds72

I will take the Engine harness (for manual trans) bad ends on starter and temp... 20.00 Under dash wiring harness 4sp/gauges very nice...65.00 manual shift column for $75.00 how much for shipping to Evansville IN 47720 Thanks Ted

Hi Ted,

I will be able to get you a shipping qoute tomorrow. We have boxes just for steering columns and should be able to fit the harnesses in with it.

I will let you know.

Thank you,
Thomas

[mike1971c10]

Hey Thomas, do you have any decent in dash radio speakers in our's or Tom's stash?
mike

[DLTruck1973]

Originally Posted by mike1971c10

Hey Thomas, do you have any decent in dash radio speakers in our's or Tom's stash?
mike

When you say decent, do you mean working well? It is not likely but I can check and get back with you. I have cores that do not work, if you can use one.

Thank you for the interest,
Thomas

[Resto-Rand]

Any manifold heat riser assembly / tube. I have 307 w/ram horn exhaust.

[DLTruck1973]

Originally Posted by Resto-Rand

Any manifold heat riser assembly / tube. I have 307 w/ram horn exhaust.

I will take a look for you and see what we have. May not be 100% perfect but will work for you. Give me some time to dig one up and check condition. Is this
for a 71 Pick up? or what year?

Thank you for the interest,
Thomas

[Resto-Rand]

Originally Posted by DLTruck1973

I will take a look for you and see what we have. May not be 100% perfect but will work for you. Give me some time to dig one up and check condition. Is this
for a 71 Pick up? or what year?

Thank you for the interest,
Thomas

Anything turn up?

[mike1971c10]

I would appreciate that, I would like to put a decent one back in the original place. I have the bracket, do I look for one similar in size that fits the bracket?
mike

[Resto-Rand]

Yes Thomas 1971 C10 W,307 ram horn manifold. Thanks for ck'ing.

[DLTruck1973]

Originally Posted by Resto-Rand

Yes Thomas 1971 C10 W,307 ram horn manifold. Thanks for ck'ing.

Yes, just like it says in your signature. Never a good idea to assume.

I will let you know.

Thank you,
Thomas

[DLTruck1973]

We still have plenty of nice pieces here.

Let me know what your needs are.

Thank you,
Thomas

[54blackhornet]

Thomas, do you know if Tom is going to LaGrande soon ? I asked him about Eyebrow retaining clips for drivers side GMC fender, I got the trim from Tom but need the clips. You can mail them if not ! Thanks