WI WTB brackets for bucket seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

parrisc19844x4_468 · 10-13-2014, 02:24 PM

WTB passenger side back bracket for bucket seats. If you have both front and back and dont want to split them up , I will take them also.

I believe the look like this.

Name: passengersidebackbrackets.JPG
Views: 407
Size: 30.1 KB

Name: passengersidebackbrackets.JPG
Views: 407
Size: 30.1 KB

**62 Longbed** · 10-13-2014, 02:42 PM

What year brackets are you looking for ??? I've seen them similar to this picture of the rear brackets ... Mount with 2 bolts I believe ... Good Luck ..

parrisc19844x4_468 · 10-13-2014, 02:54 PM

Quote:

Originally Posted by 62 Longbed

What year brackets are you looking for ??? I've seen them similar to this picture of the rear brackets ... Mount with 2 bolts I believe ... Good Luck ..

this would be for a 78 GMC
Yea those are them. Are you wanting to part with them?

**62 Longbed** · 10-13-2014, 02:57 PM

I saved the picture , since I'm looking for a set as well ... I've heard 73-76 are the same , then GM changed the rear brackets for 77 and up ... I need some for a 1975 ... Mine that I have are from a 1978 .. I will keep you informed ...

parrisc19844x4_468 · 10-13-2014, 04:05 PM

Quote:

Originally Posted by 62 Longbed

I saved the picture , since I'm looking for a set as well ... I've heard 73-76 are the same , then GM changed the rear brackets for 77 and up ... I need some for a 1975 ... Mine that I have are from a 1978 .. I will keep you informed ...

Interesting. I have another set of brackets that made my buckets set up too high, I was told they are for lower back ones and they both have the adjustment for moving them back and forward. I will post a picture of them in the morning.

parrisc19844x4_468 · 10-14-2014, 10:06 AM

Name: seatbrackets.jpg
Views: 318
Size: 88.1 KB

bucket seat brackets with towers. W

Jonboy · 10-14-2014, 12:24 PM

Those sliding brackets are most likely from a Suburban; IIRC the truck bucket brackets are all stationary on the right side.

I need to figure out a set of right side brackets for my crew cab, and I will probably let go of the pickup brackets I have. The floor pans in a crew cab and pickup are different, and it seems like a shame to cut up a set of brackets I don't really need to. I just need the time to get to a pick and pull.

bigblock73 · 10-14-2014, 01:05 PM

The passenger side bucket brackets for pickups did change, but you can still run the newer brackets in an early truck...you just need to drill one hole in the floor and use a bolt/nut to fasten it down. I put 78 bucket brackets in my 73. Fit like a glove.

parrisc19844x4_468 · 10-14-2014, 01:08 PM

Quote:

Originally Posted by bigblock73

The passenger side bucket brackets for pickups did change, but you can still run the newer brackets in an early truck...you just need to drill one hole in the floor and use a bolt/nut to fasten it down. I put 78 bucket brackets in my 73. Fit like a glove.

thanks jeff for the info. I did have these bolted to my seats but they made them sit up higher due to the u bracket they have on them.

I will sell these for $75 with the towers.

parrisc19844x4_468 · 10-15-2014, 08:35 AM

Wed bump

1978 chevy k20 · 11-03-2014, 08:27 AM

I have a set. Will post pictures tonight

1978 chevy k20 · 11-03-2014, 12:03 PM

One of the rear passenger side brackets is remade, but if he just needs the front ones then that won't matter. I have these because I fabricated brackets so that my passenger bucket seat slides like the driver

1978 chevy k20 · 11-03-2014, 10:21 PM

Here are the brackets

1978 chevy k20 · 11-03-2014, 10:22 PM

Can't upload pictures from my phone can send via text

parrisc19844x4_468 · 11-04-2014, 01:37 PM

Hi, i found some brackets so i will pass for now

1978 chevy k20 · 11-04-2014, 09:33 PM

62 Longbed are you interested?

camaro_red · 02-25-2015, 12:33 PM

I'm looking for a set for my 80 if still for sale ?

1978 chevy k20 · 02-25-2015, 08:54 PM

I only have passanger side brackets if interested

camaro_red · 02-25-2015, 11:16 PM

Price ?

1978 chevy k20 · 02-25-2015, 11:34 PM

Pm me with your email address an ill shoot you some pictures an go from there

10-13-2014, 02:24 PM	#1
parrisc19844x4_468 Registered User Join Date: Oct 2010 Location: Town of Summit, WI Posts: 322	WTB brackets for bucket seats WTB passenger side back bracket for bucket seats. If you have both front and back and dont want to split them up , I will take them also. I believe the look like this. __________________ 2017 Silverado LTZ 6.2 1984 Scottsdale K10 - 468 700r 4x4 lwb 1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb 1968 GMC 20 305 V6 good ole wood hauler. Good Fences make good neighbors

10-13-2014, 02:42 PM	#2
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: WTB brackets for bucket seats What year brackets are you looking for ??? I've seen them similar to this picture of the rear brackets ... Mount with 2 bolts I believe ... Good Luck .. Attached Images

10-13-2014, 02:57 PM	#4
62 Longbed Senior Member Join Date: Nov 2008 Location: Gresham , Oregon Posts: 588	Re: WTB brackets for bucket seats I saved the picture , since I'm looking for a set as well ... I've heard 73-76 are the same , then GM changed the rear brackets for 77 and up ... I need some for a 1975 ... Mine that I have are from a 1978 .. I will keep you informed ...

10-14-2014, 10:06 AM	#6
parrisc19844x4_468 Registered User Join Date: Oct 2010 Location: Town of Summit, WI Posts: 322	Re: WTB brackets for bucket seats bucket seat brackets with towers. W __________________ 2017 Silverado LTZ 6.2 1984 Scottsdale K10 - 468 700r 4x4 lwb 1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb 1968 GMC 20 305 V6 good ole wood hauler. Good Fences make good neighbors

10-14-2014, 12:24 PM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: WTB brackets for bucket seats Those sliding brackets are most likely from a Suburban; IIRC the truck bucket brackets are all stationary on the right side. I need to figure out a set of right side brackets for my crew cab, and I will probably let go of the pickup brackets I have. The floor pans in a crew cab and pickup are different, and it seems like a shame to cut up a set of brackets I don't really need to. I just need the time to get to a pick and pull. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-14-2014, 01:05 PM	#8
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: WTB brackets for bucket seats The passenger side bucket brackets for pickups did change, but you can still run the newer brackets in an early truck...you just need to drill one hole in the floor and use a bolt/nut to fasten it down. I put 78 bucket brackets in my 73. Fit like a glove. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

10-15-2014, 08:35 AM	#10
parrisc19844x4_468 Registered User Join Date: Oct 2010 Location: Town of Summit, WI Posts: 322	Re: WTB brackets for bucket seats Wed bump __________________ 2017 Silverado LTZ 6.2 1984 Scottsdale K10 - 468 700r 4x4 lwb 1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb 1968 GMC 20 305 V6 good ole wood hauler. Good Fences make good neighbors

11-03-2014, 08:27 AM	#11
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats I have a set. Will post pictures tonight

11-03-2014, 12:03 PM	#12
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats One of the rear passenger side brackets is remade, but if he just needs the front ones then that won't matter. I have these because I fabricated brackets so that my passenger bucket seat slides like the driver

11-03-2014, 10:21 PM	#13
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats Here are the brackets

11-03-2014, 10:22 PM	#14
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats Can't upload pictures from my phone can send via text

11-04-2014, 01:37 PM	#15
parrisc19844x4_468 Registered User Join Date: Oct 2010 Location: Town of Summit, WI Posts: 322	Re: WTB brackets for bucket seats Hi, i found some brackets so i will pass for now __________________ 2017 Silverado LTZ 6.2 1984 Scottsdale K10 - 468 700r 4x4 lwb 1978 GMC Sierra Grande K15 350 Soond to be 406 th350 4x4 swb 1968 GMC 20 305 V6 good ole wood hauler. Good Fences make good neighbors

11-04-2014, 09:33 PM	#16
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats 62 Longbed are you interested?

02-25-2015, 12:33 PM	#17
camaro_red Registered User Join Date: Oct 2007 Location: Prince George Canada Posts: 267	Re: WTB brackets for bucket seats I'm looking for a set for my 80 if still for sale ? __________________ ____ ______//__{\_____ ,/_(O)__/____/_(O)_/

02-25-2015, 08:54 PM	#18
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats I only have passanger side brackets if interested



Register or Log In To remove these advertisements.

02-25-2015, 11:16 PM	#19
camaro_red Registered User Join Date: Oct 2007 Location: Prince George Canada Posts: 267	Re: WTB brackets for bucket seats Price ? __________________ ____ ______//__{\_____ ,/_(O)__/____/_(O)_/

02-25-2015, 11:34 PM	#20
1978 chevy k20 Registered User Join Date: Nov 2014 Location: Pittsburgh PA Posts: 8	Re: WTB brackets for bucket seats Pm me with your email address an ill shoot you some pictures an go from there

Register or Log In To remove these advertisements.